scholarly journals Analytical Solution of Fractional Oldroyd-B Fluid via Fluctuating Duct

Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Ying Qing Song ◽  
Aamir Farooq ◽  
Muhammad Kamran ◽  
Sadique Rehman ◽  
Muhammad Tamoor ◽  
...  

This investigation focuses on the mixed initial boundary value problem with Caputo fractional derivatives. The studied pour an incompressible fractionalized Oldroyd-B fluid prompted by fluctuating rectangular tube. The explicit expression of the velocity field and shear stresses for the fractional model are obtained by utilizing the integral transforms, i.e., double finite Fourier sine transform and Laplace transform. Furthermore, the confirmation of the analytical solutions is also analyzed by utilizing the Tzou’s and Stehfest’s algorithms in the tabular form. In limited cases, ordinary Oldroyd-B fluid similar solutions and classical Maxwell and fractional Maxwell fluid are derived. The flow field’s graphs with the influences of relevant parameters are also mentioned.

Open Physics ◽  
2020 ◽  
Vol 18 (1) ◽  
pp. 989-1002
Author(s):  
Aamir Farooq ◽  
Muhammad Kamran ◽  
Yasir Bashir ◽  
Hijaz Ahmad ◽  
Azeem Shahzad ◽  
...  

Abstract The purpose of this proposed investigation is to study unsteady magneto hydrodynamic (MHD) mixed initial-boundary value problem for incompressible fractional Maxwell fluid model via oscillatory porous rectangular duct. Considering the modified Darcy’s law, the problem is simplified by using the method of the double finite Fourier sine and Laplace transforms. As a limiting case of the general solutions, the same results can be obtained for the classical Maxwell fluid. Also, the impact of magnetic parameter, porosity of medium, and the impact of various material parameters on the velocity profile and the corresponding tangential tensions are illuminated graphically. At the end, we will give the conclusion of the whole paper.


Mathematics ◽  
2019 ◽  
Vol 7 (11) ◽  
pp. 1127 ◽  
Author(s):  
Mohamed Jleli ◽  
Mokhtar Kirane ◽  
Bessem Samet

An initial boundary value problem for a fractional in time and space shallow-water system involving ψ -Caputo fractional derivatives of different orders is considered. Using the test function method, sufficient criteria for the absence of global in time solutions of the system are obtained.


2017 ◽  
Vol 63 (2) ◽  
pp. 247-265
Author(s):  
D A Zakora

A model of viscoelastic barotropic Maxwell fluid is investigated. The unique solvability theorem is proved for the corresponding initial-boundary value problem. The associated spectral problem is studied. We prove statements on localization of the spectrum, on the essential and discrete spectra, and on asymptotics of the spectrum.


2003 ◽  
Vol 3 (1) ◽  
pp. 45-58 ◽  
Author(s):  
Dejan Bojović

Abstract In this paper we consider the first initial boundary-value problem for the heat equation with variable coefficients in a domain (0; 1)x(0; 1)x(0; T]. We assume that the solution of the problem and the coefficients of the equation belong to the corresponding anisotropic Sobolev spaces. Convergence rate estimate which is consistent with the smoothness of the data is obtained.


Author(s):  
Shakirbai G. Kasimov ◽  
◽  
Mahkambek M. Babaev ◽  
◽  

The paper studies a problem with initial functions and boundary conditions for partial differential partial equations of fractional order in partial derivatives with a delayed time argument, with degree Laplace operators with spatial variables and nonlocal boundary conditions in Sobolev classes. The solution of the initial boundary-value problem is constructed as the series’ sum in the eigenfunction system of the multidimensional spectral problem. The eigenvalues are found for the spectral problem and the corresponding system of eigenfunctions is constructed. It is shown that the system of eigenfunctions is complete and forms a Riesz basis in the Sobolev subspace. Based on the completeness of the eigenfunctions system the uniqueness theorem for solving the problem is proved. In the Sobolev subspaces the existence of a regular solution to the stated initial-boundary problem is proved.


Author(s):  
А.М. Слиденко ◽  
В.М. Слиденко

Приводится анализ механических колебаний элементов ударного устройства с помощью модели стержневого типа. Ударник и инструмент связаны упругими и диссипативными элементами, которые имитируют их взаимодействие. Аналогично моделируется взаимодействие инструмента с рабочей средой. Сформулирована начально-краевая задача для системы двух волновых уравнений с учетом переменных поперечных сечений стержней. Площади поперечных сечений определяются параметрическими формулами при сохранении объемов стержней. Параметрические формулы позволяют получать различного вида зависимости площади поперечного сечения стержня от его длины. Начальные условия отражают физическую картину взаимодействия инструмента с ударником и рабочей средой. Краевые условия описывают контактные взаимодействия ударника с инструментом и последнего с рабочей средой. В качестве модельной задачи рассматривается соударение ударника и инструмента через элемент большой жесткости. Начально-краевая задача исследуется разностным методом. Проводится сравнение решений задачи, полученных с помощью двухслойной и трехслойной разностных схем. Такие схемы реализованы в общей компьютерной программе в системе Mathcad. Показано, что при вычислениях распределения нормальных напряжений по длине стержня лучшими свойствами относительно устойчивости обладает двухслойная схема The article gives the analysis of mechanical vibrations of the impact device elements using the model of the rod type. The hammer and the tool are connected by elastic and dissipative elements that simulate their interaction. The interaction of the tool with the processing medium is simulated in a similar way. An initial boundary-value problem is formulated for a system of two wave equations taking into account the variable cross sections of the rods. Cross-sectional areas are determined by parametric formulas maintaining the volume of the rods. Parametric formulas allow one to obtain various dependence types of the cross-sectional area of the rod on its length. The initial and boundary conditions reflect the physical phenomenon of the tool interaction with the processing medium, and also describe the contact interactions of the hammer with the tool. The impacting of the hammer and the tool through an element of high rigidity is considered as a model problem. To control the limiting values, the solution of the model problem by the Fourier method is used. The initial-boundary-value problem is investigated by the difference method. A comparison of solutions obtained for the two-layer and three-layer difference schemes is given. Such schemes are realized in a common computer program in the Mathcad. It is shown that the two-layer scheme has the best properties in relation to stability while calculating the distribution of normal voltage along the length of the rod


2019 ◽  
Vol 84 (5) ◽  
pp. 873-911 ◽  
Author(s):  
Marianna A Shubov ◽  
Laszlo P Kindrat

Abstract The distribution of natural frequencies of the Euler–Bernoulli beam subject to fully non-dissipative boundary conditions is investigated. The beam is clamped at the left end and equipped with a 4-parameter ($\alpha ,\beta ,k_1,k_2$) linear boundary feedback law at the right end. The $2 \times 2$ boundary feedback matrix relates the control input (a vector of velocity and its spatial derivative at the right end), to the output (a vector of shear and moment at the right end). The initial boundary value problem describing the dynamics of the beam has been reduced to the first order in time evolution equation in the state Hilbert space equipped with the energy norm. The dynamics generator has a purely discrete spectrum (the vibrational modes) denoted by $\{\nu _n\}_{n\in \mathbb {Z}^{\prime}}$. The role of the control parameters is examined and the following results have been proven: (i) when $\beta \neq 0$, the set of vibrational modes is asymptotically close to the vertical line on the complex $\nu$-plane given by the equation $\Re \nu = \alpha + (1-k_1k_2)/\beta$; (ii) when $\beta = 0$ and the parameter $K = (1-k_1 k_2)/(k_1+k_2)$ is such that $\left |K\right |\neq 1$ then the following relations are valid: $\Re (\nu _n/n) = O\left (1\right )$ and $\Im (\nu _n/n^2) = O\left (1\right )$ as $\left |n\right |\to \infty$; (iii) when $\beta =0$, $|K| = 1$, and $\alpha = 0$, then the following relations are valid: $\Re (\nu _n/n^2) = O\left (1\right )$ and $\Im (\nu _n/n) = O\left (1\right )$ as $\left |n\right |\to \infty$; (iv) when $\beta =0$, $|K| = 1$, and $\alpha>0$, then the following relations are valid: $\Re (\nu _n/\ln \left |n\right |) = O\left (1\right )$ and $\Im (\nu _n/n^2) = O\left (1\right )$ as $\left |n\right |\to \infty$.


2021 ◽  
Vol 5 (3) ◽  
pp. 63
Author(s):  
Emilia Bazhlekova

An initial-boundary-value problem is considered for the one-dimensional diffusion equation with a general convolutional derivative in time and nonclassical boundary conditions. We are concerned with the inverse source problem of recovery of a space-dependent source term from given final time data. Generalized eigenfunction expansions are used with respect to a biorthogonal pair of bases. Existence, uniqueness and stability estimates in Sobolev spaces are established.


2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Liming Xiao ◽  
Mingkun Li

AbstractIn this paper, we study the initial boundary value problem for a class of higher-order n-dimensional nonlinear pseudo-parabolic equations which do not have positive energy and come from the soil mechanics, the heat conduction, and the nonlinear optics. By the mountain pass theorem we first prove the existence of nonzero weak solution to the static problem, which is the important basis of evolution problem, then based on the method of potential well we prove the existence of global weak solution to the evolution problem.


Sign in / Sign up

Export Citation Format

Share Document