scholarly journals Substrate integrate waveguide and microstrip antennas at 28 GHz

2020 ◽  
Vol 9 (6) ◽  
pp. 2462-2468
Author(s):  
Yaqdhan Mahmood Hussein ◽  
Mohamad Kamal A. Rahim ◽  
Noor Asniza Murad ◽  
Mustafa Mohammed Jawad ◽  
Hatem O. Hanoosh ◽  
...  
Keyword(s):  
Millimeter Wave ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Antennas ◽  
Substrate Thickness ◽  
Wave Band ◽  
Microstrip Technology ◽  
Microstrip Patch ◽  
Wireless Communication Network ◽  
Millimeter Wave Band

In this paper, two antennas are designed using substrate integrated waveguide (SIW) and microstrip technology at 28 GHz. Parametric study for both antennas is presented to demonstrate the performance at millimeter wave frequency for wireless communication network (5G application). Roger RT5880 substrates with permittivity 2.2 and loss tangent 0.0009 are used to implement the antennas with two thicknesses of 0.508 mm and 0.127 mm respectively. Both antennas have the same size of substrate 12x12 mm with a full ground plane was used. Structures designs have been done by using computer simulation technology (CST). The simulation results showed that the antenna with SIW and roger RT 5880 substrate thickness 0.508 has better performance in term of return loss and radiation pattern than the microstrip patch antenna at 28 GHz. A return loss more than -10 dB and the gain are 6.4 dB obtained with wide bandwidth range of (27.4-28.7) GHz. This proving to increase the realized gain by implementing SIW at millimeter wave band for 5G application network.  

scholarly journals Design and Optimization of a High Gain Multiband Patch Antenna for Millimeter Wave Application

2018 ◽  
Vol 8 (5) ◽  
pp. 2942
Author(s):  
A. Zaidi ◽  
A. Baghdad ◽  
A. Ballouk ◽  
A. Badri
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Ground Plane ◽  
High Gain ◽  
Wave Band ◽  
Resonant Frequencies ◽  
Design And Optimization ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Millimeter Wave Band

<p>This paper presents an enhanced Quadri-band microstrip patch antenna, using defective slots in the ground plane, designed to operate in the millimeter wave band, formulated using cavity model and simulated by an EM-simulator, based on finite element method: HFSSv15 (High Frequency Structure Simulator). The proposed antenna incorporates two symmetric patterns of “U” shaped slots with an “I” shaped slot engraved in the middle of the ground plane. The resulting antenna has four frequency bands; the first resonant frequency is located in the Ka band, at about 27Ghz, the second at nearly 35Ghz, the third at 41Ghz and the last one at 51GHz. Those resonant frequencies could be shifted by tuning the slots dimensions introduced if the ground plane of the proposed antenna .</p><p> </p>

scholarly journals Investigations on Millimeter Wave (mmW) Antenna for 5G Technology: Design Considerations and Applications

2020 ◽  
Vol 3 (1) ◽  
pp. 149-153
Author(s):  
Sohni Singh ◽  
Manvinder Sharma ◽  
Pankaj Palta ◽  
Anuj K. Gupta
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Microstrip Antennas ◽  
Microstrip Patch Antenna ◽  
System Capacity ◽  
Potential Candidate ◽  
Wave Band ◽  
Microstrip Patch ◽  
Wave Antenna ◽  
Millimeter Wave Antenna

The millimeter wave technology has made its way to the 5G technology as the system of 5G requires larger bandwidth, higher frequency and system capacity. In order to achieve these parameters, the millimeter wave antenna research becomes necessary. The current wireless technologies require huge bandwidth which makes the spectrum of millimeter wave a potential candidate. Microstrip antennas have always been in an increasing demand due to their exceptional performance in the applications of wireless communication. The advantages of microstrip patch antenna led to its popularity among the researchers.The technologies such as MIMO, CMOS and beam forming are used with millimeter wave antenna for improving the mobile phone performance. There are various designs of microstrip patch antenna related to 5G technology and applications in the millimeter wave band which are discussed in the paper.

A Microstrip to Rectangular Waveguide Transition Using Coupling Loop in Millimeter-Wave Band

2010 ◽  
Vol 40-41 ◽  
pp. 331-334
Author(s):  
Jiang An Han ◽  
Jun Xu
Keyword(s):  
Millimeter Wave ◽  
Insertion Loss ◽  
Rectangular Waveguide ◽  
Return Loss ◽  
Short Circuit ◽  
Wave Band ◽  
Strip Conductor ◽  
Waveguide Transition ◽  
Coupling Loop ◽  
Millimeter Wave Band

A novel millimeter-wave transition from microstrip to rectangular waveguide is introduced in this paper. The theory for this design is explained. The strip conductor on microstrip, which is introduced from the center of a rectangular waveguide broad-wall to its E-plane, is shaped into a triangular loop in the waveguide terminated by a short circuit. A back to back transition operating at Ka band was simulated and fabricated. The experimental results showed the insertion loss of a back to back transition is less than 2.2dB with its return loss greater than 9.1dB from 26.5 GHz to 35.5 GHz.

DESIGN AND ANALYSIS OF A 60 GHZ MILLIMETER WAVE ANTENNA

2016 ◽  
Vol 78 (4-3) ◽  
Author(s):  
Sana Ullah ◽  
Sadiq Ullah ◽  
Shahbaz Khan
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Communication Systems ◽  
High Speed ◽  
Ground Plane ◽  
Wave Band ◽  
60 Ghz ◽  
Wave Antenna ◽  
Millimeter Wave Band ◽  
Millimeter Wave Antenna

In this paper an inset feed 60 GHz millimeter wave microstrip patch antenna is proposed for future high speed wireless communication systems. The performance of a conventional 60 GHz patch antenna compared with metamaterial-based 60 GHz antennas. The later employs three types (mushroom, cross and hexagonal) of Electromagnetic Bandgap (EBG) surfaces as a ground planes. The millimeter wave antenna employing the cross-shaped EBG give improved gain as compared to the rest of the antenna models. The 60 GHz antenna based on the mushroom type EBG present better efficiency due to the surface suppression by the ground plane. The proposed antennas can be used in future high speed wireless applications. Due to the very small size these antennas are suitable for medical implants operating in the unlicensed millimeter wave band.

scholarly journals Investigations on Millimeter Wave (mmW) Antenna for 5G Technology: Design Considerations and Applications

2020 ◽  
Vol 3 (1) ◽  
pp. 149-153
Author(s):  
Sohni Singh ◽  
Manvinder Sharma ◽  
Pankaj Palta ◽  
Anuj Kumar Gupta
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Microstrip Antennas ◽  
Microstrip Patch Antenna ◽  
System Capacity ◽  
Potential Candidate ◽  
Wave Band ◽  
Microstrip Patch ◽  
Wave Antenna ◽  
Millimeter Wave Antenna

The millimeter wave technology has made its way to the 5G technology as the system of 5G requires larger bandwidth, higher frequency and system capacity. In order to achieve these parameters, the millimeter wave antenna research becomes necessary. The current wireless technologies require huge bandwidth which makes the spectrum of millimeter wave a potential candidate. Microstrip antennas have always been in an increasing demand due to their exceptional performance in the applications of wireless communication. The advantages of microstrip patch antenna led to its popularity among the researchers.The technologies such as MIMO, CMOS and beam forming are used with millimeter wave antenna for improving the mobile phone performance. There are various designs of microstrip patch antenna related to 5G technology and applications in the millimeter wave band which are discussed in the paper.

scholarly journals Multilayer Stacked Microstrip Patch Antenna for 5G Applications Operating in Millimeter Wave Band.

2019 ◽  
Vol 9 (2) ◽  
pp. 2025-2028
Keyword(s):  
Reflection Coefficient ◽  
Patch Antenna ◽  
Ground Plane ◽  
Middle Layer ◽  
Bottom Layer ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Wave Band ◽  
Microstrip Patch ◽  
Millimeter Wave Band

The paper presents a multilayer stacked micro strip patch antenna specially for 5G applications[1]. It is a 2x2 patch array built in three layers with top layer comprising of four patches and bottom layer will be the ground plane whereas the middle layer is meant for achieving higher gain and wide bandwidth. The gain of the antenna array is found to be 11.66 dBi. The impedance bandwidth of the array antenna is found to be greater than 10%. The reflection coefficient of the array is calculated as -15.15 dB.

Wide-Band Microstrip Patch Antenna for Millimeter Wave-band Applications*

2020 ◽  
Author(s):  
Utkarsh Jain ◽  
Aakash Warke ◽  
Aditi Chauhan ◽  
Manan Gupta ◽  
Ashok Kumar ◽  
...  
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Wide Band ◽  
Microstrip Patch Antenna ◽  
Wave Band ◽  
Microstrip Patch ◽  
Millimeter Wave Band

LTCC Partially-Filled Post-Wall Rectangular-Waveguide Slot Array Antenna in the Millimeter-Wave Band

2012 ◽  
Vol E95.C (10) ◽  
pp. 1635-1642 ◽  
Author(s):  
Yuanfeng SHE ◽  
Jiro HIROKAWA ◽  
Makoto ANDO ◽  
Daisuke HANATANI ◽  
Masahiro FUJIMOTO
Keyword(s):  
Millimeter Wave ◽  
Rectangular Waveguide ◽  
Array Antenna ◽  
Wave Band ◽  
Waveguide Slot ◽  
Millimeter Wave Band
Sign in / Sign up

Export Citation Format

Share Document