scholarly journals Enhancing light scattering effect of white LEDs with ZnO nanostructures

2021 ◽  
Vol 11 (5) ◽  
pp. 3838
Author(s):  
My Hanh Nguyen Thi ◽  
Nguyen Thi Phuong Loan ◽  
Hoang Van Ngoc
Keyword(s):  
Scattered Light ◽  
Fdtd Method ◽  
Color Temperature ◽  
Temperature Uniformity ◽  
Yellow Light ◽  
Phosphor Layer ◽  
White Leds ◽  
Color Quality ◽  
Small Decline ◽  
Difference Time

Pc-LEDs, the lighting method that blends blue LED light with yellow light from phosphor to discharge white radiation, is one of the most advance known for high lumen output. However, pc-LEDs has inferior due to angular CCT deviation, which prevent pc-LEDs from reaching better performance. As a result, this research is conducted to address the need of pc-LEDs development by introducing a configuration doped with ZnO nanoparticles. The finite-difference time-domain (FDTD) method and the phosphor layer containing ZnO were applied in the experiments. The effect of ZnO-filled on the performance of color quality pc-LEDs is confirmed through calculated results. In particular, the uniformity of scattered light is improved with the presence of ZnO. In addition, ZnO particles also minimize the deviation of color temperature and enhance the color quality. Although there is a small decline in lumen output to achieve better color temperature uniformity, however, with suitable concentrations such as 0.25% N-ZnO, 0.25% S-ZnO, and 0. 75% R-ZnO, the decline is acceptable. The research on ZnO pc-LEDs demonstrates that this affordable and simple configuration can improve lighting properties and create other directions to enhance white light

scholarly journals Applying SiO2 nano-particles for improving optical properties of WLED conformal and in-cup structures

2021 ◽  
Vol 10 (4) ◽  
pp. 1914-1922
Author(s):  
Phan Xuan Le ◽  
Pham Quang Minh
Keyword(s):  
Luminous Flux ◽  
Luminous Efficiency ◽  
Nano Particles ◽  
Color Temperature ◽  
Temperature Uniformity ◽  
Phosphor Layer ◽  
Temperature Deviation ◽  
Color Uniformity ◽  
Remote Phosphor ◽  
Index Ratio

This article is the analysis of SiO2 nano-particles’ influences on the luminous efficiency and the color temperature uniformity of a remote phosphor structure in a WLED. The purpose of integrating SiO2 into the silicone layer in the remote phosphor structure is to significantly promote the scattering occurrences. Particularly, with an appropriate proportion of SiO2, there could be more blue lights generated at large angles, leading to reducing the angular-dependent color temperature deviation. The luminous flux also can get benefits from SiO2 addition owing to a proper air-phosphor layer refractive index ratio provided by this SiO2/silicone compound. The attained experimental results were compared with optical values of a non-SiO2 remote phosphor configuration and showed a notable enhancement. The color deviation was reduced by approximately 600 K in the angles from -700 ­to 700. Additionally, the lumen efficiency was improved by 2.25% at 120 mA driving current. Hence, SiO2 can be used to boost both color uniformity and luminous efficacy for remote-phosphor WLED.

scholarly journals The effectiveness of MgCeAl11O19:Tb3+ phosphor in enhancing the luminous efficacy and color quality of multi-chip white LEDs

2020 ◽  
Vol 10 (5) ◽  
pp. 4631
Author(s):  
Nguyen Thi Phuong Loan ◽  
Nguyen Doan Quoc Anh
Keyword(s):  
Optical Properties ◽  
Mie Scattering ◽  
Luminous Flux ◽  
Color Temperature ◽  
White Leds ◽  
Color Quality ◽  
Supporting Material ◽  
Mie Scattering Theory ◽  
Led Lights

In this research paper, we introduced yellow-green MgCeAl11O19:Tb3+ asa new phosphor ingredient to adapt to the quality requirements onthe chromatic homogeneity and emitted luminous flux of modern multi-chip white LED lights (MCW-LEDs). The results from experiments and simulation show that employing MgCeAl11O19:Tb3+ phosphor can lead to much better optical properties and therefore is a perfect supporting material to achieve the goals of the research. When the MgCeAl11O19:Tb3+ phosphor is added into the phosphorus composite which already contains YAG: Ce3+ particles, and the silicone glue, it affects the optical properties significantly. In other words, the concentration of this phosphor can determine the efficiency of lumen output and chromatic homogeneity of WLEDs. In specific, as the concentration of MgCeAl11O19:Tb3+ go up, the luminous yield will increase accordingly, though there is an insignificant decrease in CQS. Moreover, if the MgCeAl11O19:Tb3+ concentration reduce a little bit, it is possible to better the correlated color temperature uniformity and lumen efficacy of LED packages. In addition, the Mie scattering theory, Monte Carlo simulation and LightTools 8.3.2 software are employed to analyze and simulate the LED packages’ structure as well as the phosphor compound.

scholarly journals The Effects of TiO2 Diffuser-Loaded Encapsulation on Corrected Color Temperature Uniformity of Remote Phosphor White LEDs

2019 ◽  
Vol 9 (4) ◽  
pp. 675 ◽  
Author(s):  
Yung-Fang Chou ◽  
Chi-Feng Chen ◽  
Shang-Ping Ying ◽  
Yun-Ying Yeh
Keyword(s):  
Energy Efficient ◽  
High Efficiency ◽  
Luminous Flux ◽  
Color Temperature ◽  
White Led ◽  
Phosphor Layer ◽  
White Leds ◽  
Color Uniformity ◽  
Remote Phosphor ◽  
The Mean

With the development of high-efficiency and high-power LEDs, they have become the most energy-efficient and environmentally friendly artificial light source. Phosphor-converted white LEDs are currently mainstream in the market. The remote phosphor is an effective way to enhance the conversion efficiency and lifetime of phosphor-converted LEDs. For applications of high-quality lighting and LCD backlights, the uniformity of angular correlated color temperature (CCT) is very important. This report explored a remote phosphor white LED with low angular CCT variance and high luminous efficiency by using TiO2 diffuser-loaded encapsulation. Experimental results revealed that for the TiO2 diffuser-loaded encapsulation remote phosphor white LED, the angular color uniformity could be improved by 31.82% and the luminous flux by 8.65%. Moreover, the mean CCTs of the TiO2 diffuser-loaded encapsulation and non-diffuser remote phosphor white LEDs were similar at a driving current of 350 mA. Finally, we showed that incorporating the TiO2 diffuser into the phosphor layer of the remote phosphor white LEDs, does not influence the reliability of the LED.

scholarly journals Improving the optical efficiency of white light-emitting diodes based on phosphor-in-glass by a dual-layer remote phosphorus structure with the application of LiLaO2:Eu3+ and CaSO4:Ce3+, Mn2+

2021 ◽  
Vol 10 (4) ◽  
pp. 1838-1845
Author(s):  
Phan Xuan Le ◽  
Le Tien
Keyword(s):  
White Light ◽  
Mie Scattering ◽  
Luminous Flux ◽  
Color Temperature ◽  
Phosphor Layer ◽  
Green Phosphor ◽  
Optical Efficiency ◽  
Color Quality ◽  
Color Uniformity ◽  
Remote Phosphor

While the remote phosphor structure is not an appropriate solution for WLED color uniformity, it is more advantageous for the luminous output of WLED than the conformal phosphor or in-cup phosphor structure. Acknowledging the ability of the remote phosphor structure, many studies have been carried out to surmount the color quality disadvantage of this structure. A dual-layer remote phosphor configuration is proposed in this research paper to acquire better color quality for WLEDs through heightening the color rendering index (CRI) and the color quality scale (CQS). The color temperature of the WLED packages this study is 8500 K. By inserting a layer of green CaSO4:Ce3+,Mn2+ or red LiLaO2:Eu3+ phosphor on the yellow YAG:Ce3+ phosphor layer, the phosphor structure configuration can be constructed. Then, to get the best color quality, the concentration of added phosphor LiLaO2:Eu3+ would be changed. The findings showed the rise of CRI and CQS along with the LiLaO2:Eu3+, which implies the influence of LiLaO2:Eu3+ to the growth of red light components within WLEDs packages. The greater the concentration of LiLaO2:Eu3+ is, the more the CRI and CQS increase. Meanwhile, the luminous flux gains from the green phosphor CaSO4:Ce3+,Mn2+. Nevertheless, the luminous flux and color quality would decrease if the concentrations of both red LiLaO2:Eu3+ and green CaSO4:Ce3+,Mn2+ phosphors reach a certain corresponding level. Centered on the Mie-scattering theory and the law of Lambert-Beer, this result is illustrated. The findings in this research are vital references for manufacturing WLEDs with higher white light performance.

scholarly journals The Impacts of Red-emitting Mg2TiO4:Mn4+ Phosphor on Color Quality of Dual-layer Remote Phosphor Configuration

2019 ◽  
Vol 3 (3) ◽  
pp. 464
Author(s):  
Hsiao-Yi Lee ◽  
Phan Xuan Le ◽  
Doan Quoc Anh Nguyen
Keyword(s):  
Red Light ◽  
Mie Scattering ◽  
Conformal Structure ◽  
Luminous Flux ◽  
Color Temperature ◽  
Phosphor Layer ◽  
Creative Commons ◽  
Color Quality ◽  
Remote Phosphor ◽  
Color Rendering

In terms of luminous flux, the remote phosphor structure is better than conformal structure or in-cup phosphor structure, however, this structure often has inferior color quality compared to the others. As a result, many studies have been conducted to nd a solution to the drawback mentioned above. In this research, we are after the same goal using WLEDs structure with color temperature of 5600 K and come to the conclusion that dual-layer phosphor structure can improve the color rendering index (CRI) and the color quality scale (CQS). The concept of the research is to place red phosphor layer Mg2TiO4:Mn4+ on a yellow phosphor layer YAG:Ce3+ and locate the concentration of Mg2TiO4:Mn4+ that allows the color quality to reach the highest value. The result shows that Mg2TiO4:Mn4+ benets CRI and CQS, more specifically, the addition of Mg2TiO4:Mn4+ in WLEDs boosts the red light component, thus, enhancing CRI and CQS. However, it is demonstrated through the application of Mie-scattering theory and Lambert-Beer law that when the concentration of Mg2TiO4:Mn4+ exceed the limit, it can harm the luminous flux of WLEDs. The result of this research is a valuable contribution to improving the techniques of manufacturing better WLEDs with higher white light quality.  This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium provided the original work is properly cited.

scholarly journals Enhancement of color quality and luminous flux for remote-phosphor LEDs with red-emitting CaMgSi2O6:Eu2+,Mn2+

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Guo-Feng Luo ◽  
Nguyen Thi Phuong Loan ◽  
Le Van Tho ◽  
Nguyen Doan Quoc Anh ◽  
Hsiao-Yi Lee
Keyword(s):  
Mie Scattering ◽  
Luminous Flux ◽  
Color Temperature ◽  
Optical Efficiency ◽  
White Leds ◽  
Color Quality ◽  
Quality Scale ◽  
Color Uniformity ◽  
Remote Phosphor ◽  
Color Rendering

AbstractSiO2 particles and red-emitting CaMgSi2O6:Eu2+,Mn2+ phosphor have been added into a yellow phosphor compound YAG:Ce3+ to enhance the optical efficiency of white light LEDs whose average correlated color temperature (CCT) is in the range of 5600 K ÷ 8500 K. It was observed that altering CaMgSi2O6:Eu2+,Mn2+ concentration from 2 % to 30 % while maintaining 5 % of the SiO2 strongly influenced the color rendering index (CRI), color quality scale (CQS), and lumen efficiency of the compound. Besides, through the application of Monte Carlo simulation and Mie-scattering theory, it was possible to improve the optical properties by CaMgSi2O6:Eu2+,Mn2+ and SiO2 addition. The results provided a practical approach to achieve higher luminous efficiency and better color uniformity in remote-phosphor white LEDs (RP-WLEDs).

scholarly journals Novel lighting properties of white LEDs with two-layered remote phosphor package using red-emitting α-SrO·3B2O3:Sm2+ phosphor

2017 ◽  
Vol 35 (3) ◽  
pp. 618-625
Author(s):  
Tran Hoang Quang Minh ◽  
Nguyen Huu Khanh Nhan ◽  
Nguyen Doan Quoc Anh ◽  
Hsiao-Yi Lee
Keyword(s):  
Lower Layer ◽  
Luminous Flux ◽  
Color Temperature ◽  
Phosphor Layer ◽  
Light Emitting ◽  
White Leds ◽  
Color Uniformity ◽  
Remote Phosphor ◽  
White Light Emitting Diodes ◽  
Color Rendering

AbstractThis paper investigates a method for improving the lighting performance of white light-emitting diodes (WLEDs), packaged using two separating remote phosphor layers, yellow-emitting YAG:Ce phosphor layer and red-emitting α-SrO·3B2O3:Sm2+ phosphor layer. The thicknesses of these two layers are 800 μm and 200 μm, respectively. Both of them have been examined at average correlated color temperatures (CCT) of 7700 K and 8500 K. For this two-layer model, the concentration of red phosphor has been varied from 2 % to 30 % in the upper layer, while in the lower layer the yellow phosphor concentration was kept at 15 %. It was found interesting that the lighting properties, such as color rendering index (CRI) and luminous flux, are enhanced significantly, while the color uniformity is maintained at a level relatively close to the level in one-layer configuration (measured at the same correlated color temperature). Besides, the transmitted and reflected light of each phosphor layer have been revised by combining Kubelka-Munk and Mie-Lorenz theories. Through the analysis, it is demonstrated that the packaging configuration of two-layered remote phosphor that contains red-emitting α-SrO·3B2O3:Sm2+ phosphor particles provides a practical solution to general WLEDs lighting.

scholarly journals The impacts of Ba2Li2Si2O7:Sn2+,Mn2+ and CaMgSi2O6:Eu2+,Mn2+ particles on the optical properties of remote phosphor LED

2020 ◽  
Vol 38 (1) ◽  
pp. 197-205
Author(s):  
Ming-Jui Chen ◽  
Nguyen Thi Phuong Loan ◽  
Le Van Tho ◽  
Thuc Minh Bui ◽  
Phan Xuan Le ◽  
...  
Keyword(s):  
Scattered Light ◽  
Red Light ◽  
Green Light ◽  
Social Needs ◽  
Phosphor Layer ◽  
Green Phosphor ◽  
White Leds ◽  
Quality Scale ◽  
Remote Phosphor ◽  
Color Rendering

AbstractAs implied in the title, the triple-layer remote phosphor (TRP), constructed with the yellow YAG:Ce3+ layer at the bottom, the red CaMgSi2O6:Eu2+,Mn2+ phosphor layer on the top, and the green Ba2Li2Si2O7:Sn2+,Mn2+ phosphor layer between these two layers, is suggested in this paper to improve the color and luminescence of white LEDs (WLEDs). In order to control the red light for the purpose of increasing the color rendering index (CRI), it is suggested that the red CaMgSi2O6:Eu2+,Mn2+ phosphor should be applied in the TRP structure. Simultaneously, the structure uses the green Ba2Li2Si2O7:Sn2+,Mn2+ phosphor layer to control the green light, which increases the luminous efficacy (LE) of WLEDs. In addition, when the concentration of these two phosphors increases, the yellow YAG:Ce3+ concentration must be reduced to keep the average correlated color temperatures (ACCTs) stable at 6000 K to 8500 K. Besides, appropriate adjusting of CRI, LE, and color quality scale (CQS) is also analyzed by modifying the concentration of the green phosphor and red phosphor. The results show that the CRI can get better values if CaMgSi2O6:Eu2+,Mn2+ concentration is higher. In contrast, the CRI decreases dramatically when the concentration of Ba2Li2Si2O7:Sn2+,Mn2+ increases. Meanwhile, CQS can be significantly increased in the range of 10 % to 14 % CaMgSi2O6:Eu2+,Mn2+, regardless of the concentration of Ba2Li2Si2O7:Sn2+,Mn2+. In particular, along with the improvement of CRI and CQS, LE can also be increased by more than 40 % by reducing the scattered light and adding the green light. Obtained results are a valuable reference for manufacturers for improving WLEDs color and luminescence quality to produce a broader range of WLEDs with better quality fulfilling social needs.

scholarly journals Selecting a Suitable Remote Phosphor Configuration for Improving Color Quality of White Led

2019 ◽  
Vol 3 (4) ◽  
pp. 503
Author(s):  
Hsiao-Yi Lee ◽  
Phan Xuan Le ◽  
Doan Quoc Anh Nguyen
Keyword(s):  
Color Temperature ◽  
Research Results ◽  
White Leds ◽  
Creative Commons ◽  
Color Quality ◽  
Triple Layer ◽  
Color Uniformity ◽  
Remote Phosphor ◽  
Color Rendering

When compared with two conformal phosphor and in-cup phosphor structures, the remote phosphor structure has higher luminescent performance. However, it is difficult to control the color quality of the remote phosphor structure, so it has become a research target in recent years. So far, there are two remote phosphor structures used to improve color quality including dual-layer phosphor configuration and triple-layer phosphor configuration. This study suggests using those two configurations to make multi-chip white LEDs (WLEDs) that can achieve adequate values in color rendering index (CRI), color quality scale (CQS), luminous efficacy (LE) and color uniformity. WLEDs with a color temperature of 5600 K are applied. Research results show that the triple-layer phosphor configuration is superior in CRI, CQS, LE. Besides, the color deviation decreases significantly, meaning that the color homogeneity increases with the triple-layer phosphor configuration. This can be demonstrated by analyzing the scattering characteristics of phosphor classes through Mie theory, thus making the research results more reliable and valuable for producing quality WLEDs. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium provided the original work is properly cited.

Sign in / Sign up

Export Citation Format

Share Document