scholarly journals Asymmetric Weights and Retrieval Practice in an Autoassociative Neural Network Model of Paired-Associate Learning

2021 ◽  
pp. 1-10
Author(s):  
Sneha Aenugu ◽  
David E. Huber

Abstract Rizzuto and Kahana (2001) applied an autoassociative Hopfield network to a paired-associate word learning experiment in which (1) participants studied word pairs (e.g., ABSENCE-HOLLOW), (2) were tested in one direction (ABSENCE-?) on a first test, and (3) were tested in the same direction again or in the reverse direction (?-HOLLOW) on a second test. The model contained a correlation parameter to capture the dependence between forward versus backward learning between the two words of a word pair, revealing correlation values close to 1.0 for all participants, consistent with neural network models that use the same weight for communication in both directions between nodes. We addressed several limitations of the model simulations and proposed two new models incorporating retrieval practice learning (e.g., the effect of the first test on the second) that fit the accuracy data more effectively, revealing substantially lower correlation values (average of .45 across participants, with zero correlation for some participants). In addition, we analyzed recall latencies, finding that second test recall was faster in the same direction after a correct first test. Only a model with stochastic retrieval practice learning predicted this effect. In conclusion, recall accuracy and recall latency suggest asymmetric learning, particularly in light of retrieval practice effects.

2020 ◽  
Vol 5 ◽  
pp. 140-147 ◽  
Author(s):  
T.N. Aleksandrova ◽  
◽  
E.K. Ushakov ◽  
A.V. Orlova ◽  
◽  
...  

The neural network models series used in the development of an aggregated digital twin of equipment as a cyber-physical system are presented. The twins of machining accuracy, chip formation and tool wear are examined in detail. On their basis, systems for stabilization of the chip formation process during cutting and diagnose of the cutting too wear are developed. Keywords cyberphysical system; neural network model of equipment; big data, digital twin of the chip formation; digital twin of the tool wear; digital twin of nanostructured coating choice


Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4242
Author(s):  
Fausto Valencia ◽  
Hugo Arcos ◽  
Franklin Quilumba

The purpose of this research is the evaluation of artificial neural network models in the prediction of stresses in a 400 MVA power transformer winding conductor caused by the circulation of fault currents. The models were compared considering the training, validation, and test data errors’ behavior. Different combinations of hyperparameters were analyzed based on the variation of architectures, optimizers, and activation functions. The data for the process was created from finite element simulations performed in the FEMM software. The design of the Artificial Neural Network was performed using the Keras framework. As a result, a model with one hidden layer was the best suited architecture for the problem at hand, with the optimizer Adam and the activation function ReLU. The final Artificial Neural Network model predictions were compared with the Finite Element Method results, showing good agreement but with a much shorter solution time.


2021 ◽  
Vol 11 (3) ◽  
pp. 908
Author(s):  
Jie Zeng ◽  
Panagiotis G. Asteris ◽  
Anna P. Mamou ◽  
Ahmed Salih Mohammed ◽  
Emmanuil A. Golias ◽  
...  

Buried pipes are extensively used for oil transportation from offshore platforms. Under unfavorable loading combinations, the pipe’s uplift resistance may be exceeded, which may result in excessive deformations and significant disruptions. This paper presents findings from a series of small-scale tests performed on pipes buried in geogrid-reinforced sands, with the measured peak uplift resistance being used to calibrate advanced numerical models employing neural networks. Multilayer perceptron (MLP) and Radial Basis Function (RBF) primary structure types have been used to train two neural network models, which were then further developed using bagging and boosting ensemble techniques. Correlation coefficients in excess of 0.954 between the measured and predicted peak uplift resistance have been achieved. The results show that the design of pipelines can be significantly improved using the proposed novel, reliable and robust soft computing models.


2021 ◽  
Vol 1074 (1) ◽  
pp. 012025
Author(s):  
A Poornima ◽  
M Shyamala Devi ◽  
M Sumithra ◽  
Mullaguri Venkata Bharath ◽  
Swathi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document