laser melting deposition
Recently Published Documents


TOTAL DOCUMENTS

151
(FIVE YEARS 102)

H-INDEX

18
(FIVE YEARS 9)

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7796
Author(s):  
Muhammad Arif Mahmood ◽  
Diana Chioibasu ◽  
Sabin Mihai ◽  
Mihai Iovea ◽  
Ion N. Mihailescu ◽  
...  

In this study, an application of the laser-melting deposition additive manufacturing technique as a welding method has been studied for the laser welding (LW) of AISI 304 stainless steel, specifically 0.4 mm and 0.5 mm thick sheets. The welding was carried out without and with filler material. Inconel 718 powder particles were used as filler material in the second case. A series of experiments were designed by changing the process parameters to identify the effect of operating conditions on the weld width, depth, and height. The welds were examined through metallographic experiments performed at various cross-sections to identify the defects and pores. All the deposited welds were passed through a customized mini-focus X-ray system to analyze the weld uniformities. The optimal operating conditions were determined for 0.4 mm and 0.5 mm sheets for the LW with and without filler material. It was found that laser power, laser scanning speed, powder flow rate, and helium to argon gases mixture-control the weld bead dimensions and quality. X-ray analyses showed that the optimal operating conditions gave the least peak value of non-uniformity in the laser welds. This study opens a new window for laser welding via additive manufacturing with X-ray monitoring.


Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7749
Author(s):  
Muhammad Arif Mahmood ◽  
Asif Ur Rehman ◽  
Fatih Pitir ◽  
Metin Uymaz Salamci ◽  
Ion N. Mihailescu

Laser melting deposition (LMD) has recently gained attention from the industrial sectors due to producing near-net-shape parts and repairing worn-out components. However, LMD remained unexplored concerning the melt pool dynamics and fluid flow analysis. In this study, computational fluid dynamics (CFD) and analytical models have been developed. The concepts of the volume of fluid and discrete element modeling were used for computational fluid dynamics (CFD) simulations. Furthermore, a simplified mathematical model was devised for single-layer deposition with a laser beam attenuation ratio inherent to the LMD process. Both models were validated with the experimental results of Ti6Al4V alloy single track depositions on Ti6Al4V substrate. A close correlation has been found between experiments and modelling with a few deviations. In addition, a mechanism for tracking the melt flow and involved forces was devised. It was simulated that the LMD involves conduction-mode melt flow only due to the coaxial addition of powder particles. In front of the laser beam, the melt pool showed a clockwise vortex, while at the back of the laser spot location, it adopted an anti-clockwise vortex. During printing, a few partially melted particles tried to enter into the molten pool, causing splashing within the melt material. The melting regime, mushy area (solid + liquid mixture) and solidified region were determined after layer deposition. This research gives an in-depth insight into the melt flow dynamics in the context of LMD printing.


2021 ◽  
Vol 144 ◽  
pp. 107407
Author(s):  
Ting Liu ◽  
Zhuanni Gao ◽  
Wanli Ling ◽  
Yanni Wang ◽  
Xiaoming Wang ◽  
...  

2021 ◽  
Vol 72 ◽  
pp. 294-308
Author(s):  
Yangchuan Cai ◽  
Xiaopeng Li ◽  
Hongbo Xia ◽  
Yan Cui ◽  
Sunusi Marwana Manladan ◽  
...  

2021 ◽  
Vol 127 (12) ◽  
Author(s):  
Ruifeng Di ◽  
Zhu Qian ◽  
Yan Fang ◽  
Fanliang Tantai ◽  
Hongfang Tian ◽  
...  

2021 ◽  
Vol 2083 (2) ◽  
pp. 022024
Author(s):  
Chenghong Duan ◽  
Yinzhou Zhang ◽  
Xiangpeng Luo

Abstract 12CrNi2 alloy steel was prepared by Laser Melting Deposition (LMD) technology, and the effect of powder feeding rate on surface quality, internal defects, microstructure, and microhardness of the single track and manufactured part were investigated. The results show that the metallurgical bonding of the single track deteriorates, the surface quality of the manufactured part is improved, the average microhardness of the manufactured part increases, and the number of pores first decreases and then increases with the increase of powder feeding rate. At the lower powder feeding rate, the manufactured parts have larger pore defects, while at the higher powder feeding rate, the manufactured parts have poor fusion defects. The main phase composition of the manufactured parts is ferrite(F), granular bainite (GB), and pearlite(P), and the manufactured part has finer grains at the higher powder feeding rate.


Sign in / Sign up

Export Citation Format

Share Document