Sensitivity Enhancement of Surface Plasmon Resonance Sensor with Two Dimensional Materials Covered on Silver-Nickel Bimetallic Thin Solid Films

2020 ◽  
Vol 18 (10) ◽  
pp. 776-779
Author(s):  
L. Castañeda
Keyword(s):  
2D Materials ◽  
Sensitivity Enhancement ◽  
Thin Solid Films ◽  
Solid Films ◽  
Kretschmann Configuration ◽  
Enhanced Sensitivity ◽  
Resonance Sensor ◽  
Two Dimensional Materials ◽  
Fresnel Equation ◽  
Hybrid Configuration

In this paper a new sensing configuration with enhanced sensitivity utilizing 2D materials on the bimetallic layers of Magnetic Material Ni over Ag for Kretschmann configuration is proposed and analyzed numerically using Fresnel equation and transfer matrix method. Results show that such a hybrid configuration with well optimized thickness of metallic layer and utilization of specific no. of 2D materials can increases the sensitivity as high as 298°/RIU is absorbed for the configuration consist 10 nm of Ni over 40 nm thickness of Ag added with a 2 layers of WSe2.

scholarly journals Sensitivity Enhancement of Two-Dimensional Materials Based on Genetic Optimization in Surface Plasmon Resonance

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1198 ◽  
Author(s):  
Guo Xia ◽  
Cuixia Zhou ◽  
Shiqun Jin ◽  
Chan Huang ◽  
Jinyu Xing ◽  
...  
Keyword(s):  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Metal Film ◽  
2D Materials ◽  
Optimization Method ◽  
Sensitivity Enhancement ◽  
Optimal Number ◽  
Two Dimensional ◽  
Two Dimensional Materials

Sensitivity is an important performance index for evaluating surface plasmon resonance (SPR) biosensors. Sensitivity enhancement has always been a hot topic. It is found that the different refractive indices of samples require different combinations of prism and metal film for better sensitivity. Furthermore, the sensitivity can be enhanced by coating two-dimensional (2D) materials with appropriate layers on the metal film. At this time, it is necessary to choose the best film configuration to enhance sensitivity. With the emergence of more and more 2D materials, selecting the best configuration manually is becoming more complicated. Compared with the traditional manual method of selecting materials and layers, this paper proposes an optimization method based on a genetic algorithm to quickly and effectively find the optimal film configuration that enhances sensitivity. By using this method, not only can the optimal number of layers of 2D materials be determined quickly, but also the optimal configuration can be conveniently found when many materials are available. The maximum sensitivity can reach 400°/RIU after optimization. The method provided application value for the relevant researchers seeking to enhance sensitivity.

Electrochoromic Display Using V2O5 Amorphous Thin Solid Films

1988 ◽  
Vol 17 (3) ◽  
pp. 76-78
Author(s):  
Ramakuru N. Prasad ◽  
Abayankar Neelima ◽  
R. N. Karekar
Keyword(s):  
Thin Solid Films ◽  
Solid Films

scholarly journals Chlorosulfuric acid-assisted production of functional 2D materials

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Mohsen Moazzami Gudarzi ◽  
Maryana Asaad ◽  
Boyang Mao ◽  
Gergo Pinter ◽  
Jianqiang Guo ◽  
...  
Keyword(s):  
Hexagonal Boron Nitride ◽  
2D Materials ◽  
Real Life ◽  
Large Area ◽  
Polar Solvents ◽  
Aspect Ratios ◽  
Two Dimensional Materials ◽  
Liquid Phase Exfoliation

AbstractThe use of two-dimensional materials in bulk functional applications requires the ability to fabricate defect-free 2D sheets with large aspect ratios. Despite huge research efforts, current bulk exfoliation methods require a compromise between the quality of the final flakes and their lateral size, restricting the effectiveness of the product. In this work, we describe an intercalation-assisted exfoliation route, which allows the production of high-quality graphene, hexagonal boron nitride, and molybdenum disulfide 2D sheets with average aspect ratios 30 times larger than that obtained via conventional liquid-phase exfoliation. The combination of chlorosulfuric acid intercalation with in situ pyrene sulfonate functionalisation produces a suspension of thin large-area flakes, which are stable in various polar solvents. The described method is simple and requires no special laboratory conditions. We demonstrate that these suspensions can be used for fabrication of laminates and coatings with electrical properties suitable for a number of real-life applications.

scholarly journals Recent advances in mode-locked fiber lasers based on two-dimensional materials

Nanophotonics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 2315-2340 ◽  
Author(s):  
Junli Wang ◽  
Xiaoli Wang ◽  
Jingjing Lei ◽  
Mengyuan Ma ◽  
Cong Wang ◽  
...  
Keyword(s):  
Fiber Lasers ◽  
2D Materials ◽  
Synthesis Methods ◽  
Two Dimensional ◽  
New Materials ◽  
Saturable Absorbers ◽  
Operating Wavelength ◽  
Recent Advances ◽  
Two Dimensional Materials ◽  
Diverse Mode

AbstractDue to the unique properties of two-dimensional (2D) materials, much attention has been paid to the exploration and application of 2D materials. In this review, we focus on the application of 2D materials in mode-locked fiber lasers. We summarize the synthesis methods for 2D materials, fiber integration with 2D materials and 2D materials based saturable absorbers. We discuss the performance of the diverse mode-locked fiber lasers in the typical operating wavelength such as 1, 1.5, 2 and 3 μm. Finally, a summary and outlook of the further applications of the new materials in mode-locked fiber lasers are presented.

scholarly journals Nonlinear optical microscopies (NOMs) and plasmon-enhanced NOMs for biology and 2D materials

Nanophotonics ◽  
2020 ◽  
Vol 9 (6) ◽  
pp. 1341-1358
Author(s):  
Jialin Ma ◽  
Mengtao Sun
Keyword(s):  
Raman Scattering ◽  
Nonlinear Optical ◽  
Stimulated Raman Scattering ◽  
Second Harmonic ◽  
2D Materials ◽  
Research Progress ◽  
Two Photon ◽  
Two Dimensional Materials ◽  
Anti Stokes ◽  
Physical Principles

AbstractIn this review, we focus on the summary of nonlinear optical microscopies (NOMs), which are stimulated Raman scattering (SRS), coherent anti-Stokes Raman scattering (CARS), second harmonic generation (SHG), and two-photon excited fluorescence (TPEF). The introduction is divided into two parts: the principle of SRS, CARS, TPEF, and SHG and their application to biology and two-dimensional materials. We also introduce the connections and differences between them. We also discuss the principle of plasmon-enhanced NOM and its application in the above two aspects. This paper not only summarizes the research progress in the frontier but also deepens the readers’ understanding of the physical principles of these NOMs.

scholarly journals A Universal Atomic Substitution Conversion Strategy Towards Synthesis of Large-Size Ultrathin Nonlayered Two-Dimensional Materials

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Mei Zhao ◽  
Sijie Yang ◽  
Kenan Zhang ◽  
Lijie Zhang ◽  
Ping Chen ◽  
...  
Keyword(s):  
Theoretical Calculations ◽  
2D Materials ◽  
Direct Synthesis ◽  
Two Dimensional ◽  
Covalent Bonds ◽  
2D Layered Materials ◽  
Large Size ◽  
Two Dimensional Materials ◽  
Microfabrication Technique ◽  
Atomic Substitution

AbstractNonlayered two-dimensional (2D) materials have attracted increasing attention, due to novel physical properties, unique surface structure, and high compatibility with microfabrication technique. However, owing to the inherent strong covalent bonds, the direct synthesis of 2D planar structure from nonlayered materials, especially for the realization of large-size ultrathin 2D nonlayered materials, is still a huge challenge. Here, a general atomic substitution conversion strategy is proposed to synthesize large-size, ultrathin nonlayered 2D materials. Taking nonlayered CdS as a typical example, large-size ultrathin nonlayered CdS single-crystalline flakes are successfully achieved via a facile low-temperature chemical sulfurization method, where pre-grown layered CdI2 flakes are employed as the precursor via a simple hot plate assisted vertical vapor deposition method. The size and thickness of CdS flakes can be controlled by the CdI2 precursor. The growth mechanism is ascribed to the chemical substitution reaction from I to S atoms between CdI2 and CdS, which has been evidenced by experiments and theoretical calculations. The atomic substitution conversion strategy demonstrates that the existing 2D layered materials can serve as the precursor for difficult-to-synthesize nonlayered 2D materials, providing a bridge between layered and nonlayered materials, meanwhile realizing the fabrication of large-size ultrathin nonlayered 2D materials.

scholarly journals Corrigendum to Procedure to convert optical-constant models into analytic Thin Solid Films (2018) 52-59

2021 ◽  
Vol 733 ◽  
pp. 138816
Author(s):  
Juan I. Larruquert ◽  
Luis V. Rodríguez-de Marcos
Keyword(s):  
Optical Constant ◽  
Thin Solid Films ◽  
Solid Films
Sign in / Sign up

Export Citation Format

Share Document