scholarly journals Observational Analysis of the Predictability of Mesoscale Convective Systems

2007 ◽  
Vol 22 (4) ◽  
pp. 813-838 ◽  
Author(s):  
Israel L. Jirak ◽  
William R. Cotton
Keyword(s):  
United States ◽  
Wind Shear ◽  
Vertical Wind Shear ◽  
The United States ◽  
Vertical Wind ◽  
Mesoscale Convective Systems ◽  
Convective Initiation ◽  
Low Level ◽  
Convective Systems ◽  
Mesoscale Convective

Abstract Mesoscale convective systems (MCSs) have a large influence on the weather over the central United States during the warm season by generating essential rainfall and severe weather. To gain insight into the predictability of these systems, the precursor environments of several hundred MCSs across the United States were reviewed during the warm seasons of 1996–98. Surface analyses were used to identify initiating mechanisms for each system, and North American Regional Reanalysis (NARR) data were used to examine the environment prior to MCS development. Similarly, environments unable to support organized convective systems were also investigated for comparison with MCS precursor environments. Significant differences were found between environments that support MCS development and those that do not support convective organization. MCSs were most commonly initiated by frontal boundaries; however, features that enhance convective initiation are often not sufficient for MCS development, as the environment needs also to be supportive for the development and organization of long-lived convective systems. Low-level warm air advection, low-level vertical wind shear, and convective instability were found to be the most important parameters in determining whether concentrated convection would undergo upscale growth into an MCS. Based on these results, an index was developed for use in forecasting MCSs. The MCS index assigns a likelihood of MCS development based on three terms: 700-hPa temperature advection, 0–3-km vertical wind shear, and the lifted index. An evaluation of the MCS index revealed that it exhibits features consistent with common MCS characteristics and is reasonably accurate in forecasting MCSs, especially given that convective initiation has occurred, offering the possibility of usefulness in operational forecasting.

scholarly journals An Observational Study of Mesoscale Convective Systems with Heavy Rainfall over the Korean Peninsula

2006 ◽  
Vol 21 (2) ◽  
pp. 125-148 ◽  
Author(s):  
Hyung Woo Kim ◽  
Dong Kyou Lee
Keyword(s):  
Observational Study ◽  
Korean Peninsula ◽  
Wind Shear ◽  
Heavy Rainfall ◽  
Vertical Wind Shear ◽  
Vertical Wind ◽  
Mesoscale Convective Systems ◽  
Low Level ◽  
Convective Systems ◽  
Mesoscale Convective

Abstract A heavy rainfall event induced by mesoscale convective systems (MCSs) occurred over the middle Korean Peninsula from 25 to 27 July 1996. This heavy rainfall caused a large loss of life and property damage as a result of flash floods and landslides. An observational study was conducted using Weather Surveillance Radar-1988 Doppler (WSR-88D) data from 0930 UTC 26 July to 0303 UTC 27 July 1996. Dominant synoptic features in this case had many similarities to those in previous studies, such as the presence of a quasi-stationary frontal system, a weak upper-level trough, sufficient moisture transportation by a low-level jet from a tropical storm landfall, strong potential and convective instability, and strong vertical wind shear. The thermodynamic characteristics and wind shear presented favorable conditions for a heavy rainfall occurrence. The early convective cells in the MCSs initiated over the coastal area, facilitated by the mesoscale boundaries of the land–sea contrast, rain–no rain regions, saturated–unsaturated soils, and steep horizontal pressure and thermal gradients. Two MCSs passed through the heavy rainfall regions during the investigation period. The first MCS initiated at 1000 UTC 26 July and had the characteristics of a supercell storm with small amounts of precipitation, the appearance of a mesocyclone with tilting storm, a rear-inflow jet at the midlevel of the storm, and fast forward propagation. The second MCS initiated over the upstream area of the first MCS at 1800 UTC 26 July and had the characteristics of a multicell storm, such as a broken areal-type squall line, slow or quasi-stationary backward propagation, heavy rainfall in a concentrated area due to the merging of the convective storms, and a stagnated cluster system. These systems merged and stagnated because their movement was blocked by the Taebaek Mountain Range, and they continued to develop because of the vertical wind shear resulting from a low-level easterly inflow.

scholarly journals Seasonality and Trends of Drivers of Mesoscale Convective Systems in Southern West Africa

2021 ◽  
Vol 34 (1) ◽  
pp. 71-87
Author(s):  
Cornelia Klein ◽  
Francis Nkrumah ◽  
Christopher M. Taylor ◽  
Elijah A. Adefisan
Keyword(s):  
West Africa ◽  
Wind Shear ◽  
Dominant Role ◽  
West African Monsoon ◽  
Extreme Rainfall ◽  
Temperature Gradients ◽  
Mesoscale Convective Systems ◽  
Low Level ◽  
Convective Systems ◽  
Mesoscale Convective

AbstractMesoscale convective systems (MCSs) are the major source of extreme rainfall over land in the tropics and are expected to intensify with global warming. In the Sahel, changes in surface temperature gradients and associated changes in wind shear have been found to be important for MCS intensification in recent decades. Here we extend that analysis to southern West Africa (SWA) by combining 34 years of cloud-top temperatures with rainfall and reanalysis data. We identify clear trends in intense MCSs since 1983 and their associated atmospheric drivers. We also find a marked annual cycle in the drivers, linked to changes in the convective regime during the progression of the West African monsoon. Before the peak of the first rainy season, we identify a shear regime where increased temperature gradients play a crucial role for MCS intensity trends. From June onward, SWA moves into a less unstable, moist regime during which MCS trends are mainly linked to frequency increase and may be more influenced by total column water vapor. However, during both seasons we find that MCSs with the most intense convection occur in an environment with stronger wind shear, increased low-level humidity, and drier midlevels. Comparing the sensitivity of MCS intensity and peak rainfall to low-level moisture and wind shear conditions preceding events, we find a dominant role for wind shear. We conclude that MCS trends are directly linked to a strengthening of two distinct convective regimes that cause the seasonal change of SWA MCS characteristics. However, the convective environment that ultimately produces the most intense MCSs remains the same.

scholarly journals Local and Regional Discriminators of Mesoscale Convective Vortex Development in Arizona

2003 ◽  
Vol 131 (8) ◽  
pp. 1939-1943
Author(s):  
David M. Brommer ◽  
Robert C. Balling ◽  
Randall S. Cerveny
Keyword(s):  
United States ◽  
Wind Shear ◽  
Summer Season ◽  
Mesoscale Convective Systems ◽  
Convective Systems ◽  
Central United States ◽  
Mesoscale Convective ◽  
Mesoscale Convective Vortex ◽  
Convective Vortices ◽  
Rawinsonde Data

Abstract In approximately half of Arizona's summer season (June–September) mesoscale convective systems evolve into mesoscale convective vortices (MCVs). Analysis of satellite imagery identified MCVs in Arizona over the period 1991–2000, and local and regional rawinsonde data discriminated conditions conducive for MCV development. These results indicate that MCVs are more likely to form from convective systems when the local and regional environments are characterized by relative stability in the 850–700-hPa layer and moderate wind shear in the 500–200-hPa layer. These characteristics are similar to results reported for MCV development in the central United States.

scholarly journals A Numerical Simulation Study of the Effects of Anvil Shading on Quasi-Linear Convective Systems

2013 ◽  
Vol 70 (3) ◽  
pp. 767-793 ◽  
Author(s):  
Andrew J. Oberthaler ◽  
Paul M. Markowski
Keyword(s):  
Solar Radiation ◽  
Wind Shear ◽  
Wind Profile ◽  
Vertical Wind Shear ◽  
Vertical Wind ◽  
Convective System ◽  
Near Surface ◽  
Low Level ◽  
Convective Systems ◽  
Gust Front

Abstract Numerical simulations are used to investigate how the attenuation of solar radiation by the intervening cumulonimbus cloud, particularly its large anvil, affects the structure, intensity, and evolution of quasi-linear convective systems and the sensitivity of the effects of this “anvil shading” to the ambient wind profile. Shading of the pre-gust-front inflow environment (as opposed to shading of the cold pool) has the most important impact on the convective systems. The magnitude of the low-level cooling, associated baroclinicity, and stabilization of the pre-gust-front environment due to anvil shading generally increases as the duration of the shading increases. Thus, for a given leading anvil length, a slow-moving convective system tends to be affected more by anvil shading than does a fast-moving convective system. Differences in the forward speeds of the convective systems simulated in this study are largely attributable to differences in the mean environmental wind speed over the depth of the troposphere. Anvil shading reduces the buoyancy realized by the air parcels that ascend through the updrafts. As a result, anvil shading contributes to weaker updrafts relative to control simulations in which clouds are transparent to solar radiation. Anvil shading also affects the convective systems by modifying the low-level (nominally 0–2.5 km AGL) vertical wind shear in the pre-gust-front environment. The shear modifications affect the slope of the updraft region and system-relative rear-to-front flow, and the sign of the modifications is sensitive to the ground-relative vertical wind profile in the far-field environment. The vertical wind shear changes are brought about by baroclinic vorticity generation associated with the horizontal buoyancy gradient that develops in the shaded boundary layer (which makes the pre-gust-front, low-level vertical wind shear less westerly) and by a reduction of the vertical mixing of momentum due to the near-surface (nominally 0–300 m AGL) stabilization that accompanies the shading-induced cooling. The reduced mixing makes the pre-gust-front, low-level vertical shear more (less) westerly if the ambient, near-surface wind and wind shear are westerly (easterly).

scholarly journals A high-resolution unified observational data product of mesoscale convective systems and isolated deep convection in the United States for 2004–2017

2021 ◽  
Vol 13 (2) ◽  
pp. 827-856
Author(s):  
Jianfeng Li ◽  
Zhe Feng ◽  
Yun Qian ◽  
L. Ruby Leung
Keyword(s):  
United States ◽  
High Resolution ◽  
Atmospheric Chemistry ◽  
Rocky Mountains ◽  
Deep Convection ◽  
The United States ◽  
Mesoscale Convective Systems ◽  
Convective Systems ◽  
Data Product ◽  
Mesoscale Convective

Abstract. Deep convection possesses markedly distinct properties at different spatiotemporal scales. We present an original high-resolution (4 km, hourly) unified data product of mesoscale convective systems (MCSs) and isolated deep convection (IDC) in the United States east of the Rocky Mountains and examine their climatological characteristics from 2004 to 2017. The data product is produced by applying an updated Flexible Object Tracker algorithm to hourly satellite brightness temperature, radar reflectivity, and precipitation datasets. Analysis of the data product shows that MCSs are much larger and longer-lasting than IDC, but IDC occurs about 100 times more frequently than MCSs, with a mean convective intensity comparable to that of MCSs. Hence both MCS and IDC are essential contributors to precipitation east of the Rocky Mountains, although their precipitation shows significantly different spatiotemporal characteristics. IDC precipitation concentrates in summer in the Southeast with a peak in the late afternoon, while MCS precipitation is significant in all seasons, especially for spring and summer in the Great Plains. The spatial distribution of MCS precipitation amounts varies by season, while diurnally, MCS precipitation generally peaks during nighttime except in the Southeast. Potential uncertainties and limitations of the data product are also discussed. The data product is useful for investigating the atmospheric environments and physical processes associated with different types of convective systems; quantifying the impacts of convection on hydrology, atmospheric chemistry, and severe weather events; and evaluating and improving the representation of convective processes in weather and climate models. The data product is available at https://doi.org/10.25584/1632005 (Li et al., 2020).

scholarly journals A high-resolution unified observational data product of mesoscale convective systems and isolated deep convection in the United States for 2004–2017

2020 ◽  
Author(s):  
Jianfeng Li ◽  
Zhe Feng ◽  
Yun Qian ◽  
L. Ruby Leung
Keyword(s):  
United States ◽  
High Resolution ◽  
Atmospheric Chemistry ◽  
Rocky Mountains ◽  
Deep Convection ◽  
The United States ◽  
Mesoscale Convective Systems ◽  
Convective Systems ◽  
Data Product ◽  
Mesoscale Convective

Abstract. Deep convection possesses markedly distinct properties at different spatiotemporal scales. We present an original high-resolution (4 km, hourly) unified data product of mesoscale convective systems (MCSs) and isolated deep convection (IDC) in the United States east of the Rocky Mountains and examine their climatological characteristics from 2004 to 2017. The data product is produced by applying an updated FLEXTRKR (Flexible Object Tracker) algorithm to hourly satellite brightness temperature, radar reflectivity, and precipitation datasets. Analysis of the data product shows that MCSs are much larger and longer-lasting than IDC, but IDC occurs about 100 times more frequently than MCSs, with a mean convective intensity comparable to that of MCSs. Hence both MCS and IDC are essential contributors to precipitation east of the Rocky Mountains, although their precipitation shows significantly different spatiotemporal characteristics. IDC precipitation concentrates in summer in the Southeast with a peak in the late afternoon, while MCS precipitation is significant in all seasons, especially for spring and summer in the Great Plains. The spatial distribution of MCS precipitation amounts varies by seasons, while diurnally, MCS precipitation generally peaks during nighttime except in the Southeast. Potential uncertainties and limitations of the data product are also discussed. The data product is useful for investigating the atmospheric environments and physical processes associated with different types of convective systems, quantifying the impacts of convection on hydrology, atmospheric chemistry, and severe weather events, and evaluating and improving the representation of convective processes in weather and climate models. The data product is available at https://doi.org/10.25584/1632005 (Li et al., 2020).

Sign in / Sign up

Export Citation Format

Share Document