Effects of processing parameters on the performance of carbon fiber reinforced polyphenylene sulfide laminates manufactured by laser-assisted automated fiber placement

2021 ◽  
pp. 002199832110558
Author(s):  
Dacheng Zhao ◽  
Jiping Chen ◽  
Haoxuan Zhang ◽  
Weiping Liu ◽  
Guangquan Yue ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Process Parameters ◽  
Compaction Pressure ◽  
Polyphenylene Sulfide ◽  
Void Content ◽  
Fiber Reinforced ◽  
Tool Temperature ◽  
Fiber Placement ◽  
Automated Fiber Placement ◽  
Carbon Fiber Reinforced

In situ consolidation of thermoplastic composites can be realized through laser-assisted automated fiber placement (AFP) technology, and the properties of composites were significant affected by the process parameters. In this work, the effects of process parameters on the properties of continuous carbon fiber–reinforced polyphenylene sulfide (CF/PPS) composites manufactured by laser-assisted AFP were investigated. Four-plies CF/PPS prepreg was laid under the combination of different process parameters and the morphology, void content, crystallinity, and inter-laminar shear strength (ILSS) of the composites were characterized. It turned out that the resin distribution on the surface of the composites could be significantly improved by increasing the laser temperature and compaction pressure. The highest crystallinity of the composites reached 46% at tool temperature of 120°C while the value was only 18% when the tool temperature was 40°C. Meanwhile, with the increasing compaction force ranging of 500–2000 N, the void content of the composites decreased obviously. The ILSS was evaluated through double notch tensile shear test. The results indicated that the mechanical properties of the composites were dominated by void content rather than crystallinity.

Postprocessing method-induced mechanical properties of carbon fiber-reinforced thermoplastic composites

2020 ◽  
pp. 089270572094537
Author(s):  
Van-Tho Hoang ◽  
Bo-Seong Kwon ◽  
Jung-Won Sung ◽  
Hyeon-Seok Choe ◽  
Se-Woon Oh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Processing Parameters ◽  
Thermoplastic Composites ◽  
Void Content ◽  
Fiber Reinforced ◽  
Crystallinity Degree ◽  
Automated Fiber Placement ◽  
Carbon Fiber Reinforced

Promising carbon fiber-reinforced thermoplastic (CF/polyetherketoneketone (PEKK)) composites were fabricated by the state-of-the-art technology known as “Automated Fiber Placement.” The mechanical properties of CF/PEKK were evaluated for four different postprocessing methods: in situ consolidation, annealing, vacuum bag only (VBO), and hot press (HP). The evaluation was performed by narrowing down the relevant processing parameters (temperature and layup speed). Furthermore, the void content and crystallinity of CF/PEKK were measured to determine the effect of these postprocessing processes. The HP process resulted in the best quality with the highest interlaminar shear strength, highest crystallinity degree, and lowest void content. The second most effective method was VBO, and annealing also realized an improvement compared with in situ consolidation. The correlation between the postprocessing method and the void content and crystallinity degree was also discussed.

scholarly journals The Micro–Macro Interlaminar Properties of Continuous Carbon Fiber-Reinforced Polyphenylene Sulfide Laminates Made by Thermocompression to Simulate the Consolidation Process in FDM

Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 301
Author(s):  
Jiale Hu ◽  
Suhail Mubarak ◽  
Kunrong Li ◽  
Xu Huang ◽  
Weidong Huang ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
3D Printing ◽  
Manufacturing Industry ◽  
Fused Deposition Modeling ◽  
Polyphenylene Sulfide ◽  
Fiber Reinforced ◽  
Continuous Fiber ◽  
Fused Deposition ◽  
Continuous Carbon Fiber ◽  
Carbon Fiber Reinforced

Three-dimensional (3D) printing of continuous fiber-reinforced composites has been developed in recent decades as an alternative means to handle complex structures with excellent design flexibility and without mold forming. Although 3D printing has been increasingly used in the manufacturing industry, there is still room for the development of theories about how the process parameters affect microstructural properties to meet the mechanical requirements of the printed parts. In this paper, we investigated continuous carbon fiber-reinforced polyphenylene sulfide (CCF/PPS) as feedstock for fused deposition modeling (FDM) simulated by thermocompression. This study revealed that the samples manufactured using a layer-by-layer process have a high tensile strength up to 2041.29 MPa, which is improved by 68.8% compared with those prepared by the once-stacked method. Moreover, the mechanical–microstructure characterization relationships indicated that the compactness of the laminates is higher when the stacked CCF/PPS are separated, which can be explained based on both the void formation and the nanoindentation results. These reinforcements confirm the potential of remodeling the layer-up methods for the development of high-performance carbon fiber-reinforced thermoplastics. This study is of great significance to the improvement of the FDM process and opens broad prospects for the aerospace industry and continuous fiber-reinforced polymer matrix materials.

Numerical and Experimental Analysis of Self Piercing Riveting Process with Carbon Fiber-Reinforced Plastic and Aluminium Sheets

2013 ◽  
Vol 554-557 ◽  
pp. 1045-1054 ◽  
Author(s):  
Welf Guntram Drossel ◽  
Reinhard Mauermann ◽  
Raik Grützner ◽  
Danilo Mattheß
Keyword(s):  
Finite Element ◽  
Carbon Fiber ◽  
Finite Element Model ◽  
Simulation Model ◽  
Process Parameters ◽  
Process Model ◽  
Element Model ◽  
Model Parameters ◽  
Fiber Reinforced ◽  
Carbon Fiber Reinforced

In this study a numerical simulation model was designed for representing the joining process of carbon fiber-reinforced plastics (CFRP) and aluminum alloy with semi-tubular self-piercing rivet. The first step towards this goal is to analyze the piercing process of CFRP numerical and experimental. Thereby the essential process parameters, tool geometries and material characteristics are determined and in finite element model represented. Subsequently the finite element model will be verified and calibrated by experimental studies. The next step is the integration of the calibrated model parameters from the piercing process in the extensive simulation model of self-piercing rivet process. The comparison between the measured and computed values, e.g. process parameters and the geometrical connection characteristics, shows the reached quality of the process model. The presented method provides an experimental reliable characterization of the damage of the composite material and an evaluation of the connection performances, regarding the anisotropic property of CFRP.

Interfacial micromechanics of carbon fiber-reinforced polyphenylene sulfide composites

2014 ◽  
Vol 21 (4) ◽  
pp. 359-369 ◽  
Author(s):  
Baoying Liu ◽  
Xiaojun Wang ◽  
Shengru Long ◽  
Jie Yang
Keyword(s):  
Carbon Fiber ◽  
Polyphenylene Sulfide ◽  
Fiber Reinforced ◽  
Carbon Fiber Reinforced
Sign in / Sign up

Export Citation Format

Share Document