Synthesis of poly(methyl methacrylate-co-acrylic acid)/n-eicosane microcapsules for thermal comfort in textiles

2015 ◽  
Vol 85 (19) ◽  
pp. 2051-2058 ◽  
Author(s):  
Cemil Alkan ◽  
Sennur Alay Aksoy ◽  
Ruhan Altun Anayurt
Keyword(s):  
Acrylic Acid ◽  
Methyl Methacrylate ◽  
Thermal Comfort ◽  
Poly Methyl Methacrylate

Reactions of macroions with ester and carboxylic groups of polymers

1987 ◽  
Vol 52 (9) ◽  
pp. 2194-2203
Author(s):  
Miloslav Kučera ◽  
Dušan Kimmer ◽  
Karla Majerová ◽  
Josef Majer
Keyword(s):  
Maleic Anhydride ◽  
Acrylic Acid ◽  
Methyl Methacrylate ◽  
Bond Formation ◽  
Covalent Bond ◽  
The Other ◽  
Poly Methyl Methacrylate ◽  
Other Hand ◽  
Carboxylic Groups ◽  
Poly Acrylic Acid

In the reaction of dianions with poly(methyl methacrylate), only an insignificant amount of insoluble crosslinked product is obtained. If, however, the concentration of grafting dianions approaches that of ester groups, the amount of poly(methyl methacrylate) which may thus be crosslinked becomes quite significant. Dications, too, can bring about crosslinking of only an insignificant number of poly(methyl methacrylate) chains. Carboxylic groups in poly(acrylic acid) react with dianions and dications in an anhydrous medium similarly to ester groups. On the other hand, in the presence of a cocatalytic amount of water dications are more readily bound to carboxylic groups, forming a covalent bond. The relatively highest efficiency was observed in the bond formation between dication and the poly[styrene-alt-(maleic anhydride)], both in an anhydrous medium and in the presence of H2O.

Synthesis of poly(methyl methacrylate)-b-poly(acrylic acid) by DPE method

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Dong Chen ◽  
Ruixue Liu ◽  
Zhifeng Fu ◽  
Yan Shi
Keyword(s):  
Molecular Weight ◽  
Acrylic Acid ◽  
Methyl Methacrylate ◽  
Diblock Copolymer ◽  
Self Assembly ◽  
Gel Permeation Chromatography ◽  
Amphiphilic Diblock Copolymer ◽  
Poly Methyl Methacrylate ◽  
Copolymer Poly ◽  
Poly Acrylic Acid

AbstractAmphiphilic diblock copolymer poly(methyl methacrylate)-b-poly(acrylic acid) (PMMA-b-PAA) was prepared by 1,1-diphenylethene (DPE) method. Firstly, free radical polymerization of methyl methacrylate was carried out with AIBN as initiator in the presence of DPE, giving a DPE-containing PMMA precursor with controlled molecular weight. tert-Butyl acrylate (tBA) was then polymerized in the presence of the PMMA precursor, and PMMA-b-PtBA diblock copolymer with controlled molecular weight was prepared. Finally, amphiphilic diblock copolymer PMMA-b-PAA was obtained by hydrolysis of PMMA-b-PtBA. The formation of PMMA-b-PAA was confirmed by 1H NMR spectrum and gel permeation chromatography. Transmission electron microscopy and dynamic light scattering were used to detect the self-assembly behavior of the amphiphilic diblock polymers in methanol.

Carboxyl functionalized poly(methyl methacrylate-acrylic acid-ethylene glycol dimethacrylate) copolymer particles and their amination with amine-nucleophiles

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Hasan Ahmad ◽  
Md. Emtiaz Hossain ◽  
M. Abdur Rahman ◽  
M. Mahbubor Rahman ◽  
M. A. Jalil Miah ◽  
...  
Keyword(s):  
Acrylic Acid ◽  
Ethylene Glycol ◽  
Methyl Methacrylate ◽  
Ethylene Glycol Dimethacrylate ◽  
Carboxyl Groups ◽  
Carboxyl Group ◽  
Glycol Dimethacrylate ◽  
Emulsion Copolymerization ◽  
Poly Methyl Methacrylate ◽  
Ftir Spectral Analysis

AbstractPoly(methyl methacrylate-acrylic acid-ethylene glycol dimethacrylate) copolymer particles abbreviated as P(MMA-AA-EGDM) copolymer particles were prepared by soap-free emulsion copolymerization. The concentration of carboxyl group on/near the surface of particles increased with the increase in acrylic acid (AA) content in the recipe. The carboxyl groups were reacted with amine nucleophiles such ethylene diamine and 1,6-diaminohexane through preactivation with dicyclohexyl carbodiimide as a coupling agent. The modified particles were characterized by electron micrographs and FTIR spectral analysis. Adsorption behaviours of some biomolecules were measured to have idea about=-0 the polarity of the particles surface

scholarly journals Aqueous solutions of random poly(methyl methacrylate-co-acrylic acid): effect of the acrylic acid content

RSC Advances ◽  
2017 ◽  
Vol 7 (22) ◽  
pp. 13372-13382 ◽  
Author(s):  
Anna Y. Gyurova ◽  
Sylvia Halacheva ◽  
Elena Mileva
Keyword(s):  
Acrylic Acid ◽  
Aqueous Solutions ◽  
Methyl Methacrylate ◽  
Acid Content ◽  
Interfacial Properties ◽  
Bulk Solution ◽  
Poly Methyl Methacrylate ◽  
Acid Effect

.Effect of acrylic acid (AA) content on the bulk solution and air/water interfacial properties of PMMA–AA.

Sign in / Sign up

Export Citation Format

Share Document