A study of the physical properties and bending stiffness of antistatic and antibacterial knitted fabrics

2021 ◽  
pp. 004051752110550
Author(s):  
Norina Asfand ◽  
Virginija Daukantienė
Keyword(s):  
Physical Properties ◽  
Bending Stiffness ◽  
Physical Characteristics ◽  
Control Group ◽  
Back Side ◽  
Knitted Fabrics ◽  
Area Density ◽  
Side Face ◽  
Face Side

Different fiber blends, knit patterns, and treatments may be applied to increase the functionality and comfort of knitted fabrics. In this research, the physical properties and bending stiffness of 1 × 1 rib and half-milano rib fabrics with four fiber blends (90% cotton/10% antistatic PET, 80% cotton/20% antistatic PET, 70% cotton/30% antistatic PET, and 65% cotton/35% antistatic PET) applied to each knit pattern were studied. The effect of fabric direction (course and wale), technical side (face side and back side), and treatment (dying, softening with Aquasoft® SI hydrophilic softener, and Polygiene VO-600 antibacterial finish) on the physical characteristics and bending stiffness of the fabrics was evaluated. The results revealed that dyeing and softening increased the fabric area density and both wale and course densities and decreased fabric thicknesses compared to the control fabrics. The antibacterial finish applied to the softened samples did not change the physical properties. Bending stiffness in the course direction was lower than in the wale direction, and it was higher for technical face samples than for technical back ones. The 1 × 1 rib knitted fabrics showed lower stiffness than the half-milano rib fabrics. Treatment of the investigated fabrics decreased bending stiffness for both treatment sample groups compared to the control group.

scholarly journals Surface lime and silicate application and crop production system effects on physical characteristics of a Brazilian Oxisol

Soil Research ◽  
2017 ◽  
Vol 55 (8) ◽  
pp. 778
Author(s):  
G. S. A. Castro ◽  
C. A. C. Crusciol ◽  
C. A. Rosolem ◽  
J. C. Calonego ◽  
K. R. Brye
Keyword(s):  
Physical Properties ◽  
Bulk Density ◽  
Production System ◽  
Crop Production ◽  
Management Practices ◽  
Production Systems ◽  
Crop Productivity ◽  
Soil Physical Properties ◽  
Physical Characteristics ◽  
Forage Crop

This work aimed to evaluate the effects of crop rotations and soil acidity amelioration on soil physical properties of an Oxisol (Rhodic Ferralsol or Red Ferrosol in the Australian Soil Classification) from October 2006 to September 2011 in Botucatu, SP, Brazil. Treatments consisted of four soybean (Glycine max)–maize (Zea mays)–rice (Oryza sativa) rotations that differed in their off-season crop, either a signal grass (Urochloa ruziziensis) forage crop, a second crop, a cover crop, or fallow. Two acid-neutralising materials, dolomitic lime (effective calcium carbonate equivalent (ECCE) = 90%) and calcium-magnesium silicate (ECCE = 80%), were surface applied to raise the soil’s base saturation to 70%. Selected soil physical characteristics were evaluated at three depths (0–0.1, 0.1–0.2, and 0.2–0.4 m). In the top 0.1 m, soil bulk density was lowest (P < 0.05) and macroporosity and aggregate stability index were greatest (P < 0.05) in the forage crop compared with all other production systems. Also, bulk density was lower (P < 0.05) and macroporosity was greater (P < 0.05) in the acid-neutralising-amended than the unamended control soil. In the 0.1–0.2-m interval, mean weight diameter and mean geometric diameter were greater (P < 0.05) in the forage crop compared with all other production systems. All soil properties evaluated in this study in the 0.2–0.4-m interval were unaffected by production system or soil amendment after five complete cropping cycles. Results of this study demonstrated that certain soil physical properties can be improved in a no-tillage soybean–maize–rice rotation using a forage crop in the off-season and with the addition of acid-neutralising soil amendments. Any soil and crop management practices that improve soil physical properties will likely contribute to sustaining long-term soil and crop productivity in areas with highly weathered, organic matter-depleted, acidic Oxisols.

scholarly journals ESTUDO COMPARATIVO ENTRE O FIO DE NAILON E A LINHA DE PESCA (POLIAMIDA) E A SUA APLICABILIDADE COMO FIO CIRÚRGICO

1999 ◽  
Vol 4 (1) ◽  
Author(s):  
SHEILA CANEVESE RAHAL ◽  
MANOEL ÁLVARO GUIMARÃES ◽  
JOSÉ VICENTE FORTES ◽  
HÉLIO LANGONI ◽  
PEDRO HELIO LUCCHIARI
Keyword(s):  
Adverse Effect ◽  
Comparative Study ◽  
Physical Properties ◽  
Group Iv ◽  
Experimental Results ◽  
Control Group ◽  
Group Iii ◽  
Nylon Thread ◽  
Group I ◽  
Mucous Membranes

"Linhas de pesca"* em diâmetros de 0,15mm; 0,20mm; 0,25mm; 0,30mm foram divididas em quatro grupos, contendo dez amostras de cada diâmetro: grupo I - controle; grupo II - linhas colocadas em frasco com pastilhas de formalina; grupo III - um ciclo de autoclavagem (30 minutos à 121 C, seguido por 10 minutos de secagem à 37 C em estufa); grupo IV - dois ciclos de autoclavagens. Foram avaliadas quanto: comprimento, calibre, resistência no nó e alongamento. Comparativamente foram examinados fios de náilon cirúrgico nas numerações 0, 1-0, 2-0, 3-0, 4-0 e 5-0 (10 amostras de cada um). Pelos resultados da análise estastística, verificou-se que a esterilização pelo calor úmido exerceu um efeito adverso na resistência da "linha de pesca". Por outro lado não houve diferenças na resistência, calibre e alongamento da "linha de pesca" entre o primeiro e segundo ciclo de autoclavagem. As “linhas” mantidas em pastilhas de formalina mantiveram na sua maioria suas características originais de resistência, comprimento, diâmetro e alongamento quando comparada ao grupo controle, entretanto, cabe lembrar que o formaldeído é considerado irritante para pele e membrana mucosa. Foi possível concluir que a "linha de pesca" apresenta características semelhantes ao fio cirúrgico, podendo ser mantida em pastilhas de formalina ou esterilizada em autoclave, lembrando que a autoclavagem altera algumas de suas propriedades físicas. Abstract A comparative study has been carried out between fishing lines and nylon thread in regard to their applicability as surgical thread. Four groups of 10 fishing lines in each of the following diameters = 0.15, 0.20, 0.25 and 0.30 mm = were subjected to the following treatments: group I, control; group II sterilized with formalin tablets; group III, autoclaved 30 minutes at 121oC; group IV, autoclaved twice 30 minutes at 121oC. The following parameters were then considered: length, caliber, resistance at the knot, and elongation. Ten samples of each surgical 0, 1.0, 2.0, 3.0, 4.0 and 5.0 nylon threads were used in comparatively similar experiments as the ones carried out with the fishing lines. According to the statistical analyses of the experimental results, it has been found that the sterilization by means of the humid heat exerts an adverse effect on the resistance of the fishing line. However, no differences were found between the effect displayed by two cycles sterilization compared with the fishing lines subjected to only one cycle. The threads maintained in formalin kept the majority of their original properties of resistance, length, diameter and elongation when compared with the control group. It is known, however that formaldehyde is an irritant chemical towards the skin and the mucous membranes. It was possible to conclude: a. fishing lines display characteristics similar to that ones of the nylon surgical thread; b. they can be maintained in formalin solution; c. autoclave sterilization alters some of their physical properties.

Physical Properties and Leachability of MLW Stream Containing Cr, Ni and Cd Immobilized in a Cement Matrix

1988 ◽  
Vol 127 ◽  
Author(s):  
E. Zamorani ◽  
I. A. Sheikh ◽  
M. Della Rossa ◽  
G. Serrini
Keyword(s):  
Compressive Strength ◽  
Physical Properties ◽  
Chloride Ions ◽  
Physical Characteristics ◽  
The Other ◽  
Cement Clinker ◽  
Cement Matrix ◽  
Spent Fuel ◽  
Metal Hydroxides ◽  
Low Concentration

ABSTRACTCement samples containing variable amounts of Cr(III) or Ni(II) or Cd(II) as chloride admixtures present in a MLW stream from reprocessing of spent fuel were prepared under established procedure. Due to the high pH generated in the cement clinker hydration, respective metal hydroxides are formed and improve the physical characteristics of the cement matrix. An increase in the value of the compressive strength was observed when about 7% of the above elements were blended in cement. The increase depends on the nature of the element in the sequence Cr >Ni >Cd.The leach tests confirm the formation of insoluble hydroxide presenting a low concentration in the leachate corresponding to 0.05, 0.004 and 0.052 mg.L−1 for Cr, Ni and Cd, respectively. On the other hand, the hydro-lyzed chloride ions seem to react with calcium with consequent increased degradation of the cement matrix.

scholarly journals Icy Dwarf Planets: Colored Popsicles in the Outer Solar System

2015 ◽  
Vol 11 (A29A) ◽  
pp. 241-246
Author(s):  
Noemi Pinilla-Alonso
Keyword(s):  
Solar System ◽  
Physical Properties ◽  
Physical Characteristics ◽  
Outer Solar System ◽  
Dwarf Planets

AbstractWe update the list of candidates to be considered by the IAU as dwarf planets using the criterium suggested by Tancredi & Favre (2008). We add here the information collected in the last 10 years (mostly the sizes and albedos by the herschel hey program TNOs Are Cool). We compare the physical characteristics of these candidates with the physical characteristics of the rest of the TNOs. Our goal is to study if there are common physical properties among the candidates that enable the identification of a dwarf planet.

scholarly journals III. On the physical characters of the lines in the spark spectra of the elements

1891 ◽  
Vol 49 (296-301) ◽  
pp. 448-451 ◽  
Keyword(s):  
Periodic Function ◽  
Physical Properties ◽  
Physical Characteristics ◽  
The Self

The properties of the atoms are a periodic function of their masses, and the physical characteristics of the spectra of the elements appear to be an expression of the properties of the atoms; for there is undoubtedly an intimate connexion between the rays emitted by the self-luminous vapours of the elements and their chemical and physical properties.

Sign in / Sign up

Export Citation Format

Share Document