Establishment of the three-dimensional model of the nonwoven structure with fiber scale based on the GAN algorithm

2021 ◽  
pp. 004051752110672
Author(s):  
Jiang Wang ◽  
Qianqian Shi ◽  
Nicholus Tayari Akankwasa ◽  
Yuze Zhang ◽  
Jun Wang
Keyword(s):  
Simulation Analysis ◽  
Special Functions ◽  
Three Dimensional ◽  
Nonwoven Fabric ◽  
Generation Model ◽  
Diffusion Experiment ◽  
Two Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
And Function

The structure of nonwovens gives special functions, and the establishment of the structure model has important reference significance for the realization of functions. In this work, the two-dimensional configuration of polyester fibers in a spunlaced nonwoven fabric was extracted, and the configurational feature points of 2500 fibers were obtained. Combined with the generative adversarial nets algorithm, the generation model of the two-dimensional configuration of fibers was proposed after learning the configuration feature of 2500 fibers. Based on the assumption that the fibers are randomly distributed in the nonwoven fabric, we established a three-dimensional model of the spunlaced nonwoven fabric on the fiber scale using ABAQUS software. In addition, the water diffusion experiment and simulation were carried out to visualize the diffusion process of a water droplet in the nonwoven fabric, verifying the accuracy of the model. This method provides a novel idea for the modeling of textile structure on the fiber scale, which can be regarded as a model basis for the subsequent simulation analysis and function research.

Clinical experience of using virtual 3D modelling for pre and intraoperative guidance during robotic-assisted partial nephrectomy

2021 ◽  
pp. 205141582110002
Author(s):  
Lorenz Berger ◽  
Aziz Gulamhusein ◽  
Eoin Hyde ◽  
Matt Gibb ◽  
Teele Kuusk ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Partial Nephrectomy ◽  
Surgical Outcome ◽  
Prospective Cohort ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Robotic Assisted ◽  
Robotic Assisted Partial Nephrectomy

Objective: Surgical planning for robotic-assisted partial nephrectomy is widely performed using two-dimensional computed tomography images. It is unclear to what extent two-dimensional images fully simulate surgical anatomy and case complexity. To overcome these limitations, software has been developed to reconstruct three-dimensional models from computed tomography data. We present the results of a feasibility study, to explore the role and practicality of virtual three-dimensional modelling (by Innersight Labs) in the context of surgical utility for preoperative and intraoperative use, as well as improving patient involvement. Methods: A prospective study was conducted on patients undergoing robotic-assisted partial nephrectomy at our high volume kidney cancer centre. Approval from a research ethics committee was obtained. Patient demographics and tumour characteristics were collected. Surgical outcome measures were recorded. The value of the three-dimensional model to the surgeon and patient was assessed using a survey. The prospective cohort was compared against a retrospective cohort and cases were individually matched using RENAL (radius, exophytic/endophytic, nearness to collecting system or sinus, anterior/posterior, location relative to polar lines) scores. Results: This study included 22 patients. Three-dimensional modelling was found to be safe for this prospective cohort and resulted in good surgical outcome measures. The mean (standard deviation) console time was 158.6 (35) min and warm ischaemia time was 17.3 (6.3) min. The median (interquartile range) estimated blood loss was 125 (50–237.5) ml. Two procedures were converted to radical nephrectomy due to the risk of positive margins during resection. The median (interquartile range) length of stay was 2 (2–3) days. No postoperative complications were noted and all patients had negative surgical margins. Patients reported improved understanding of their procedure using the three-dimensional model. Conclusion: This study shows the potential benefit of three-dimensional modelling technology with positive uptake from surgeons and patients. Benefits are improved perception of vascular anatomy and resection approach, and procedure understanding by patients. A randomised controlled trial is needed to evaluate the technology further. Level of evidence: 2b

Dynamic Simulation Analysis of the Crane Hoisting Process Based on Adams

2014 ◽  
Vol 940 ◽  
pp. 132-135 ◽  
Author(s):  
Yi Fan Zhao ◽  
Ling Sha ◽  
Yi Zhu
Keyword(s):  
Dynamic Simulation ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Wire Rope ◽  
Dynamics Simulation ◽  
Dimensional Model ◽  
Analysis Model ◽  
Three Dimensional Model ◽  
Adams Software ◽  
Simulation Results

Established the dynamics simulation analysis model of crane hoisting mechanism based on the theory of dynamics in Adams software, and then through the three dimensional model of lifting mechanism dynamics entities, the constraints, load, drive can be added, the motion law can be defined to simulation analysis the change of the force of wire rope, the change of displacement, velocity and acceleration of lifting weight in the lifting process. On the basis of the simulation results, it can make a great improvement for the structure of crane and provide a meaningful theoretical reference for the hoisting machinery innovation design.

Blast load simulation using conical shock tube systems

2019 ◽  
Vol 11 (2) ◽  
pp. 135-158 ◽  
Author(s):  
Ahmed Ismail ◽  
Mohamed Ezzeldin ◽  
Wael El-Dakhakhni ◽  
Michael Tait
Keyword(s):  
Shock Tube ◽  
Three Dimensional ◽  
Design Parameters ◽  
Civil Infrastructure ◽  
Two Dimensional ◽  
Blast Loads ◽  
Dimensional Model ◽  
Tube System ◽  
Three Dimensional Model ◽  
Conical Shock

With the increased frequency of accidental and deliberate explosions, evaluating the response of civil infrastructure systems to blast loading has been attracting the interests of the research and regulatory communities. However, with the high cost and complex safety and logistical issues associated with field explosives testing, North American blast-resistant construction standards (e.g. ASCE 59-11 and CSA S850-12) recommend the use of shock tubes to simulate blast loads and evaluate relevant structural response. This study first aims at developing a simplified two-dimensional axisymmetric shock tube model, implemented in ANSYS Fluent, a computational fluid dynamics software, and then validating the model using the classical Sod’s shock tube problem solution, as well as available shock tube experimental test results. Subsequently, the developed model is compared to a more complex three-dimensional model and the results show that there is negligible difference between the two models for axisymmetric shock tube performance simulation; however, the three-dimensional model is necessary to simulate non-axisymmetric shock tubes. Following the model validation, extensive analyses are performed to evaluate the influences of shock tube design parameters (e.g. the driver section pressure and length and the expansion section length) on blast wave characteristics to facilitate a shock tube design that would generate shock waves similar to those experienced by civil infrastructure components under blast loads. The results show that the peak reflected pressure increases as the driver pressure increases, while a decrease in the expansion length increases the peak reflected pressure. In addition, the positive phase duration increases as both the driver length and expansion length are increased. Finally, the developed two-dimensional axisymmetric model is used to optimize the dimensions of a physical large-scale conical shock tube system constructed for civil infrastructure component blast response evaluation applications. The capabilities of such shock tube system are further investigated by correlating its design parameters to a range of explosion threats identified by different hemispherical TNT charge weight and distance scenarios.

Eclectic modelling of the North Atlantic. II. Transient tracers and the ventilation of the Eastern Basin thermocline

1988 ◽  
Vol 325 (1583) ◽  
pp. 201-236 ◽  
Keyword(s):  
North Atlantic ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Ekman Pumping ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Oxygen Utilization ◽  
The North ◽  
Time Histories ◽  
Weak Constraints

Renewal rates of the waters of the thermocline in the eastern North Atlantic are estimated by combining linear quasi-geostrophic dynamics with steady and transient tracers into a unified eclectic, reservoir model. The two-dimensional model first employed is finally rejected when it is found that it generates oxygen-utilization rates (OUR) that are, by conventional biological wisdom, too high. The three-dimensional model that replaces the two-dimensional one shows that the our is indeterminate, with possible ranges from zero to unacceptably high values. The region is flushed primarily from the north and east. The problem of using transient tracers is mathematically equivalent to that of distributed-system boundary-control theory, the open-ocean boundary conditions playing the role of the unknown control variables. The missing time histories of this new set of unknowns means that tritium and helium-3 distributions are only comparatively weak constraints on the flow field, but do set upper bounds on the vertical exchange with surface waters. Surface Ekman pumping is adequate to explain the interior distributions without additional buoyancy ventilation, although this latter process is possible. Some speculation is made about conditions under which transient tracers might play a more definitive role.

Design of Bilateral Automatic Window Cleaning Device Based on Solid Edge

2014 ◽  
Vol 662 ◽  
pp. 183-186
Author(s):  
Guo Lei Xu ◽  
Tao Wu
Keyword(s):  
Simple Structure ◽  
High Efficiency ◽  
Simulation Analysis ◽  
Low Cost ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Model And Simulation ◽  
Cleaning Device ◽  
Solid Edge

This paper introduces an easy-sided automatic window cleaning device, which uses Solid Edge software to design three-dimensional model and simulation analysis of the structure. Contrasted with the function of existing products, this design has such advantages as simple structure, low cost, high efficiency, good effects and so on.

Sign in / Sign up

Export Citation Format

Share Document