Linear amplification factor transport equation for stationary crossflow instabilities in supersonic boundary layers

Author(s):  
Jiakuan Xu

Based on the database from linear stability theory (LST) analysis, a local amplification factor transport equation for stationary crossflow (CF) waves in low-speed boundary layers was developed in 2019. In this paper, the authors try to extend this transport equation to compressible boundary layers based on local flow variables. The similarity equations for compressible boundary layers are introduced to build the function relations between non-local variables and local flow parameters. Then, compressibility corrections are taken into account to modify the source term of the transport equation. Through verifications of different sweep angles, Reynolds numbers, angles of attack, Mach numbers, and different cross-section geometric shapes, the rationality and correctness of the new transport equation established in this paper are illustrated.

2003 ◽  
Vol 125 (3) ◽  
pp. 455-464 ◽  
Author(s):  
Y. B. Suzen ◽  
P. G. Huang ◽  
Lennart S. Hultgren ◽  
David E. Ashpis

A new transport equation for the intermittency factor was proposed to predict separated and transitional boundary layers under low-pressure turbine airfoil conditions. The intermittent behavior of the transitional flows is taken into account and incorporated into computations by modifying the eddy viscosity, μt, with the intermittency factor, γ. Turbulent quantities are predicted by using Menter’s two-equation turbulence model (SST). The intermittency factor is obtained from a transport equation model, which not only can reproduce the experimentally observed streamwise variation of the intermittency in the transition zone, but also can provide a realistic cross-stream variation of the intermittency profile. In this paper, the intermittency model is used to predict a recent separated and transitional boundary layer experiment under low pressure turbine airfoil conditions. The experiment provides detailed measurements of velocity, turbulent kinetic energy and intermittency profiles for a number of Reynolds numbers and freestream turbulent intensity conditions and is suitable for validation purposes. Detailed comparisons of computational results with experimental data are presented and good agreements between the experiments and predictions are obtained.


2015 ◽  
Vol 783 ◽  
pp. 379-411 ◽  
Author(s):  
I. Marusic ◽  
K. A. Chauhan ◽  
V. Kulandaivelu ◽  
N. Hutchins

In this paper we study the spatial evolution of zero-pressure-gradient (ZPG) turbulent boundary layers from their origin to a canonical high-Reynolds-number state. A prime motivation is to better understand under what conditions reliable scaling behaviour comparisons can be made between different experimental studies at matched local Reynolds numbers. This is achieved here through detailed streamwise velocity measurements using hot wires in the large University of Melbourne wind tunnel. By keeping the unit Reynolds number constant, the flow conditioning, contraction and trip can be considered unaltered for a given boundary layer’s development and hence its evolution can be studied in isolation from the influence of inflow conditions by moving to different streamwise locations. Careful attention was given to the experimental design in order to make comparisons between flows with three different trips while keeping all other parameters nominally constant, including keeping the measurement sensor size nominally fixed in viscous wall units. The three trips consist of a standard trip and two deliberately ‘over-tripped’ cases, where the initial boundary layers are over-stimulated with additional large-scale energy. Comparisons of the mean flow, normal Reynolds stress, spectra and higher-order turbulence statistics reveal that the effects of the trip are seen to be significant, with the remnants of the ‘over-tripped’ conditions persisting at least until streamwise stations corresponding to $Re_{x}=1.7\times 10^{7}$ and $x=O(2000)$ trip heights are reached (which is specific to the trips used here), at which position the non-canonical boundary layers exhibit a weak memory of their initial conditions at the largest scales $O(10{\it\delta})$, where ${\it\delta}$ is the boundary layer thickness. At closer streamwise stations, no one-to-one correspondence is observed between the local Reynolds numbers ($Re_{{\it\tau}}$, $Re_{{\it\theta}}$ or $Re_{x}$ etc.), and these differences are likely to be the cause of disparities between previous studies where a given Reynolds number is matched but without account of the trip conditions and the actual evolution of the boundary layer. In previous literature such variations have commonly been referred to as low-Reynolds-number effects, while here we show that it is more likely that these differences are due to an evolution effect resulting from the initial conditions set up by the trip and/or the initial inflow conditions. Generally, the mean velocity profiles were found to approach a constant wake parameter ${\it\Pi}$ as the three boundary layers developed along the test section, and agreement of the mean flow parameters was found to coincide with the location where other statistics also converged, including higher-order moments up to tenth order. This result therefore implies that it may be sufficient to document the mean flow parameters alone in order to ascertain whether the ZPG flow, as described by the streamwise velocity statistics, has reached a canonical state, and a computational approach is outlined to do this. The computational scheme is shown to agree well with available experimental data.


2020 ◽  
Vol 2020 ◽  
pp. 1-12 ◽  
Author(s):  
JiaKuan Xu ◽  
Lei Qiao ◽  
Junqiang Bai

Boundary layer transition is a hot research topic in fluid mechanics and aerospace engineering. In low-speed flows, two-dimensional Tollmien-Schlichting (T-S) waves always dominate the flow instability, which has been modeled by Coder and Maughmer from 2013. However, in supersonic flows, three-dimensional oblique Tollmien-Schlichting waves become dominant in flow instability. Inspired by Coder and Maughmer’s NTS amplification factor transport equation for two-dimensional Tollmien-Schlichting waves in low-speed flows and Kroo and Sturdza’s linear stability theory (LST) analysis results for oblique Tollmien-Schlichting waves in supersonic flows, a new amplification factor transport equation for oblique Tollmien-Schlichting waves has been developed based on LST. The compressible Falkner-Skan similarity equations are introduced to build the relationships between nonlocal variables and local variables so that all the variables used in the present model can be calculated using local variables. Applications of this new transport equation to the flows over supersonic flat plate, 3% thick biconvex airfoil, and one modified supersonic laminar airfoil show promising results compared with the standard LST analysis results.


AIAA Journal ◽  
10.2514/1.517 ◽  
2003 ◽  
Vol 41 (12) ◽  
Author(s):  
Anatoli Tumin ◽  
Eli Reshotko

Author(s):  
Vincent O. S. Olunloyo ◽  
Charles A. Osheku ◽  
Sidikat I. Kuye

Internal fluid flow parameters in conjunction with elastomechanical properties of conveyance systems have significantly modulated flow induced vibrations in pipeline and riser systems. Recent advances on the mechanics of sandwich elastic systems as effective vibration and noise reduction mechanisms have simulated the possibility of replacing traditional steel pipes with sandwich pipes in deepwater environment. The dynamic behaviour and stability of sandwich elastic pipes conveying a non-Newtonian fluid are investigated in this paper. For this problem, a set of generalised non-linear equations governing the vibration of sandwich pipes held together in pressurised environment and conveying a non-Newtonian fluid is presented. By linearizing the governing partial differential equation matching the problem physics, under slight perturbation of the internal fluid velocity and other flow variables closed form analytical results for the system dual natural frequencies and stability under external excitation are computed for field designs and applications. Results show that for a given length of pipe, beyond the critical velocity, instability increases with the velocity of conveyance.


1991 ◽  
Vol 113 (4) ◽  
pp. 608-616 ◽  
Author(s):  
H. M. Jang ◽  
J. A. Ekaterinaris ◽  
M. F. Platzer ◽  
T. Cebeci

Two methods are described for calculating pressure distributions and boundary layers on blades subjected to low Reynolds numbers and ramp-type motion. The first is based on an interactive scheme in which the inviscid flow is computed by a panel method and the boundary layer flow by an inverse method that makes use of the Hilbert integral to couple the solutions of the inviscid and viscous flow equations. The second method is based on the solution of the compressible Navier–Stokes equations with an embedded grid technique that permits accurate calculation of boundary layer flows. Studies for the Eppler-387 and NACA-0012 airfoils indicate that both methods can be used to calculate the behavior of unsteady blade boundary layers at low Reynolds numbers provided that the location of transition is computed with the en method and the transitional region is modeled properly.


Sign in / Sign up

Export Citation Format

Share Document