scholarly journals Minimum Five-Year Outcomes and Clinical Survivorship Following Arthroscopic Double-Row Repair for Full-thickness Supraspinatus Tears

2018 ◽  
Vol 6 (7_suppl4) ◽  
pp. 2325967118S0007
Author(s):  
Jonas Pogorzelski ◽  
Erik M. Fritz ◽  
Marilee P. Horan ◽  
Zaamin B. Hussain ◽  
Christoph Katthagen ◽  
...  

Objectives: Rotator cuff tears lead to significant morbidity due to pain and decreased function. Despite the prevalence of cuff repairs, mid-term outcomes have been scarcely reported. The purpose of this study is to report minimum 5-year outcomes and clinical survivorship after double-row rotator cuff repair for full-thickness supraspinatus tendon tears. Methods: Patients at least five years out from arthroscopic double-row repair for a full-thickness cuff tear involving the supraspinatus tendon were included. Pre- and postoperative ASES, SF-12 PCS, QuickDASH, SANE, and satisfaction scores were collected. The relationship between outcomes and (1) tear chronicity, (2) number of tendons involved, (3) type of repair, and (4) primary versus revision procedure, was also evaluated. Kaplan-Meier survivorship analysis was conducted defining failures as progression to revision rotator cuff surgery. Results: From November 2005 to February 2012, a total of 189 shoulders were eligible for inclusion. Fifteen shoulders (7.9%) underwent revision rotator cuff repair and were considered failures. Outcomes data were reported at a mean follow-up of 6.6 (range, 5.0-11.0) years. All outcome scores significantly improved from pre- to postoperative time point, including mean ASES (57.9 to 92.9, P < 0.001), SF-12 PCS (43.4 to 52.0, P < 0.001), QuickDASH (35.2 to 10.5, P < 0.001), and SANE scores (61.5 to 86.5, P < 0.001). Acute tears demonstrated significantly better ASES and SANE scores than chronic tears (ASES 95.1 ± 8.9 versus 91.7 ± 11.2, P = 0.025; SANE 89.6 ± 19.9 versus 85.7 ± 21.3, P = 0.042). No other analyzed variable had a significant association with outcomes scores ( P > 0.05). Survivorship analysis demonstrated a postoperative clinical survivorship of the repair of 96.5% at two years and 93.8% at five years (Figure 1). Conclusion: Patients can expect excellent clinical outcomes and a low failure rate following arthroscopic double-row repair of full-thickness supraspinatus tears at mid-term follow-up. The repair of acute tears and primary repairs were associated with better postoperative outcomes.

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Ignacio Carbonel ◽  
Angel A. Martínez ◽  
Elisa Aldea ◽  
Jorge Ripalda ◽  
Antonio Herrera

Purpose. The purpose of this study was to evaluate the functional outcome and the tendon healing after arthroscopic double row rotator cuff repair of large and massive rotator cuff tears.Methods. 82 patients with a full-thickness large and massive rotator cuff tear underwent arthroscopic repair with double row technique. Results were evaluated by use of the UCLA, ASES, and Constant questionnaires, the Shoulder Strength Index (SSI), and range of motion. Follow-up time was 2 years. Magnetic resonance imaging (MRI) studies were performed on each shoulder preoperatively and 2 years after repair.Results. 100% of the patients were followed up. UCLA, ASES, and Constant questionnaires showed significant improvement compared with preoperatively (P<0.001). Range of motion and SSI in flexion, abduction, and internal and external rotation also showed significant improvement (P<0.001). MRI studies showed 24 cases of tear after repair (29%). Only 8 cases were a full-thickness tear.Conclusions. At two years of followup, in large and massive rotator cuff tears, an arthroscopic double row rotator cuff repair technique produces an excellent functional outcome and structural integrity.


2021 ◽  
Vol 9 (10_suppl5) ◽  
pp. 2325967121S0033
Author(s):  
John Feldman ◽  
Mims Ochsner ◽  
Glenn Fleisig ◽  
Rob Tatum ◽  
Lindsay Grosz ◽  
...  

Objectives: All-suture anchor use for rotator cuff repair is increasing. Potential benefits of these anchors include less bone loss from anchor hole drilling and decreased injury to the chondral surface with anchor pullout. Minimal evidence exists comparing clinical outcomes of all suture to solid medial row anchor fixation in double row suture bridge rotator cuff repair. The purpose of this study was to compare patient-reported outcomes for rotator cuff tears treated with all-suture medial row anchors to those treated with more traditional solid anchors. The null hypothesis was that there is no difference in outcomes between the all-suture and solid anchor rotator cuff repairs. Methods: Three sports medicine fellowship trained surgeons performed rotator cuff repairs using the double row suture bridge technique with minimum 3 years of follow up. Patients were separated into two groups based on whether or not they received all-suture or solid anchor fixation for the medial row of their repair. All lateral row fixation was performed with solid anchors. Primary outcomes were evaluated with telephone follow-up and included the American Shoulder and Elbow Surgery Score (ASES), Single Assessment Numeric Evaluation (SANE), and Visual Analog Scale (VAS). The Rehabilitation protocol was the same for all subjects in the study. Results: 3 sports medicine fellowship trained orthopaedic surgeons performed 153 rotator cuff repairs. 91 of these subjects had all-suture fixation of the medial row and 62 received solid anchor fixation. Follow up was 3.6 years ± 0.6 for the all-suture group and 3.7 years ± 0.6 in the solid anchor group (p= 0.28). ASES scores were 92 ± 16 in the all-suture group and 90 ± 17 in the solid group (p =0.35). SANE scores were 91 ± 13 in the all-suture and also 91 ± 13 in the solid anchor cohort (p = 0.97). VAS scores were 1.1 ± 2.0 in the all-suture and 0.7± 1.8 in the solid anchor group (p=0.17). There were no significant differences between groups with regards to re-operation rate or anchor configuration. Conclusions: All suture anchors used in medial row fixation for double row suture bridge rotator cuff repairs have similar clinical outcomes to rotator cuff tears treated in similar fashion with solid medial row anchors.


2020 ◽  
Vol 8 (7) ◽  
pp. 232596712093831
Author(s):  
Atsushi Endo ◽  
Paul Hoogervorst ◽  
Conrad Safranek ◽  
Kyle R. Sochacki ◽  
Marc R. Safran ◽  
...  

Background: Biomechanical studies have demonstrated that arthroscopic rotator cuff repair using a linked double-row equivalent construct results in significantly higher load to failure compared with conventional transosseous-equivalent constructs. Purpose: To determine the patient-reported outcomes (PROs), reoperation rates, and complication rates after linked double-row equivalent rotator cuff repair for full-thickness rotator cuff tears. Study Design: Case series; Level of evidence, 4. Methods: Consecutive patients who underwent linked double-row equivalent arthroscopic rotator cuff repair with minimum 2-year follow-up were included. The primary outcome was the American Shoulder and Elbow Surgeons (ASES) score at final follow-up. Secondary outcomes included the Simple Shoulder Test (SST), shortened Disabilities of the Arm, Shoulder and Hand (QuickDASH) questionnaire, visual analog scale (VAS), reoperations, and complications. Clinical relevance was defined by the minimally clinically important difference (MCID). Comparisons on an individual level that exceeded MCID (individual-level scores) were deemed clinically relevant. Comparisons between preoperative and postoperative scores were completed using the Student t test. All P values were reported with significance set at P < .05. Results: A total of 42 shoulders in 41 consecutive patients were included in this study (21 male patients [51.2%]; mean age, 64.5 ± 11.9 years; mean follow-up, 29.7 ± 4.5 months). All patients (100%) completed the minimum 2-year follow-up. The rotator cuff tear measured on average 15.2 ± 8.9 mm in the coronal plane and 14.6 ± 9.8 mm in the sagittal plane. The ASES score improved significantly from 35.5 ± 18.2 preoperatively to 93.4 ± 10.6 postoperatively ( P < .001). The QuickDASH ( P < .001), SST ( P < .001), and VAS ( P < .001) scores also significantly improved after surgery. All patients (42/42 shoulders; 100%) achieved clinically relevant improvement (met or exceeded MCID) on ASES and SST scores postoperatively. There were no postoperative complications (0.0%) or reoperations (0.0%) at final follow-up. Conclusion: Arthroscopic repair of full-thickness rotator cuff tears with the linked double-row equivalent construct results in statistically significant and clinically relevant improvements in PRO scores with low complication rates (0.0%) and reoperation rates (0.0%) at short-term follow-up.


2018 ◽  
Vol 46 (13) ◽  
pp. 3165-3173 ◽  
Author(s):  
Leo Pauzenberger ◽  
Philipp R. Heuberer ◽  
Felix Dyrna ◽  
Elifho Obopilwe ◽  
Bernhard Kriegleder ◽  
...  

Background: Delamination in rotator cuff tears has been identified as a prognostic factor for negative outcome after repair, with a reported prevalence between 38% and 88%. Purpose: To compare biomechanical properties of 3 repair techniques for delaminated rotator cuff tears. Study Design: Controlled laboratory study. Methods: Eighteen fresh-frozen cadaveric shoulders were used to evaluate rotator cuff footprint reconstruction, contact area and pressure, displacement under cyclical loading, and load to failure of 3 double-row repair configurations: double-row suture repair with medial row knots (medially knotted bridge, mkB); knotless double-row repair using suture tapes (knotless bridge, klB); and knotless double-row, double-layer-specific repair (double-layer, DL). Dynamic pressure sensors were used to assess contact patterns at the footprint region in 0°, 30°, and 60° of glenohumeral abduction and 5 rotational positions (0°, 30° of internal rotation, 30° of external rotation, 60° of internal rotation, 60° of external rotation). Optical markers were used to document whole tendon and individual layer displacement after rotator cuff repair under cyclical loading for 200 cycles (10 N to 100 N at 1 Hz). Specimens were then loaded monotonically to failure at a rate of 33 mm/min. Results: Mean contact area and footprint restoration were highest in the DL group at 60° of glenohumeral abduction for all rotational positions (mkB mean ± SD, 195.4 ± 54.3 mm2, 66.7% ± 19.7%; klB, 250.6 ± 34.9 mm2, 76.2% ± 10.3%; DL, 318.4 ± 36.6 mm2, 109.1% ± 24.0%; P < .001). The double-layer-specific repair showed the least displacement under cyclical loading (mkB mean ± SD, 0.53 ± 0.18 mm; klB, 0.79 ± 0.37 mm; DL, 0.31 ± 0.24 mm; P = .029), most closely resembling the native tendon. Peak loads at failure were comparable between repair groups (mkB mean ± SD, 366.92 ± 70.59 N; klB, 280.05 ± 77.66 N; DL, 398.35 ± 109.04 N; P = .083). Conclusion: Anatomic restoration of the superior capsular and tendon insertion in delaminated rotator cuff tears with a double-layer-specific repair configuration demonstrated superior footprint restoration with increasing abduction, while providing construct displacement comparable to the native tendon under cyclical loading. Peak load at failure was comparable between repair constructs. Clinical Relevance: The prevalence and clinical importance of delaminated rotator cuff tears have long been underestimated. Anatomically correct individual reconstruction of the superior capsule and rotator cuff could restore near-native biomechanics and potentially reduce the risk of rotator cuff repair failure.


2021 ◽  
pp. 036354652110154
Author(s):  
Adam M. Johannsen ◽  
Justin W. Arner ◽  
Bryant P. Elrick ◽  
Philip-C. Nolte ◽  
Dylan R. Rakowski ◽  
...  

Background: Modern rotator cuff repair techniques demonstrate favorable early and midterm outcomes, but long-term results have yet to be reported. Purpose: To determine 10-year outcomes and survivorship after arthroscopic double-row transosseous-equivalent (TOE) rotator cuff repair. Study Design: Case series; Level of evidence 4. Methods: The primary TOE rotator cuff repair procedure was performed using either a knotted suture bridge or knotless tape bridge technique on a series of patients with 1 to 3 tendon full-thickness rotator cuff tears involving the supraspinatus. Only patients who were 10 years postsurgery were included. Patient-reported outcomes were collected pre- and postoperatively, including American Shoulder and Elbow Surgeons (ASES), 12-Item Short Form Health Survey (SF-12), Single Assessment Numeric Evaluation (SANE), shortened version of the Disabilities of the Arm, Shoulder and Hand (QuickDASH), and satisfaction. Kaplan-Meier survivorship analysis was performed. Failure was defined as progression to revision surgery. Results: A total of 91 shoulders (56 men, 31 women) were included between October 2005 and December 2009. Mean follow-up was 11.5 years (range, 10.0-14.1 years). Of 91 shoulders, 5 (5.5%) failed and required revision surgery. Patient-reported outcomes for patients who survived were known for 80% (69/86). Outcomes scores at final follow-up were as follows: ASES, 93.1 ± 10.8; SANE, 87.5 ± 14.2; QuickDASH, 11.1 ± 13.5; and SF-12 physical component summary (PCS), 49.2 ± 10.1. There were statistically significant declines in ASES, SANE, and SF-12 PCS from the 5-year to 10-year follow-up, but none of these changes met the minimally clinically important difference threshold. Median satisfaction at final follow-up was 10 (range, 3-10). From this cohort, Kaplan-Meier survivorship demonstrated a 94.4% survival rate at a minimum of 10 years. Conclusion: Arthroscopic TOE rotator cuff repair demonstrates high patient satisfaction and low revision rates at a mean follow-up of 11.5 years. This information may be directly utilized in surgical decision making and preoperative patient counseling regarding the longevity of modern double-row rotator cuff repair.


2018 ◽  
Vol 33 (6) ◽  
pp. 792-807 ◽  
Author(s):  
Gabrielle Deprés-Tremblay ◽  
Anik Chevrier ◽  
Martyn Snow ◽  
Scott Rodeo ◽  
Michael D Buschmann

Rotator cuff tears result in shoulder pain, stiffness, weakness and loss of motion. After surgical repair, high failure rates have been reported based on objective imaging and it is recognized that current surgical treatments need improvement. The aim of the study was to assess whether implants composed of freeze-dried chitosan (CS) solubilized in autologous platelet-rich plasma (PRP) can improve rotator cuff repair in a rabbit model. Complete tears were created bilaterally in the supraspinatus tendon of New Zealand White rabbits ( n = 4 in a pilot feasibility study followed by n = 13 in a larger efficacy study), which were repaired using transosseous suturing. On the treated side, CS-PRP implants were injected into the transosseous tunnels and the tendon itself, and healing was assessed histologically at time points ranging from one day to two months post-surgery. CS-PRP implants were resident within transosseous tunnels and adhered to tendon surfaces at one day post-surgery and induced recruitment of polymorphonuclear cells from 1 to 14 days. CS-PRP implants improved attachment of the supraspinatus tendon to the humeral head through increased bone remodelling at the greater tuberosity and also inhibited heterotopic ossification of the supraspinatus tendon at two months. In addition, the implants did not induce any detectable deleterious effects. This preliminary study provides the first evidence that CS-PRP implants could be effective in improving rotator cuff tendon attachment in a small animal model.


2019 ◽  
Vol 160 (14) ◽  
pp. 533-539
Author(s):  
Imre Sallai ◽  
Márton Weidl ◽  
Attila Szatmári ◽  
Imre Antal ◽  
Gábor Skaliczki

Abstract: Introduction: In the case of rotator cuff tears, the severity of the muscle atrophy and fatty degeneration has an effect on the success of the repair and on the functional outcome after surgery. Aim: The ability of regeneration reduces with ageing; therefore, the study examined the atrophy and the fatty degeneration after rotator cuff repair in patients over 65. Method: Eleven patients over 65 years of age were involved whose surgery was performed at the Department of Orthopaedics of Semmelweis University between 2012 and 2015. Their average age was 71.9 years and the average follow-up period was 39.9 months. Tear sizes were C1 in 3 cases, C2 in 3 cases, C3 in 4 cases, and C4 in 1 case. Each patient had magnetic resonance examination before and after the repair; the muscle atrophy and fatty degeneration were evaluated together with the type of the tear. Visual analogue scale and Constant score were used for the assessment of the pain and the shoulder function. Results: The average Constant score was 75 points. The occupancy ratio – referring to the severity of the atrophy – did not show significant improvement. The change in fatty degeneration and the atrophy were examined in different groups according to the size of the tears. In each group, the results showed progression. Conclusions: After rotator cuff repair in patients over 65, fatty degeneration and muscle atrophy also show progression. No significant relationship was found between the size of the tear and fatty degeneration or between the size of the tear and muscle atrophy. Orv Hetil. 2019; 160(14): 533–539.


2019 ◽  
Vol 7 (5) ◽  
pp. 232596711984591 ◽  
Author(s):  
Avinesh Agarwalla ◽  
Gregory L. Cvetanovich ◽  
Anirudh K. Gowd ◽  
Anthony A. Romeo ◽  
Brian J. Cole ◽  
...  

Background: Rotator cuff injuries are a leading cause of shoulder disability among adults. Surgical intervention is a common treatment modality; however, conservative management has been described for the treatment of rotator cuff tears. As the cost of health care increases, the industry has shifted to optimizing patient outcomes, reducing readmissions, and reducing expenditure. In 2010, the American Academy of Orthopaedic Surgeons created clinical practice guidelines (CPGs) to guide the management of rotator cuff injuries. Since their publication, there have been several randomized controlled trials assessing the management of rotator cuff injuries. Purpose: To quantitatively describe changes in the management of full-thickness rotator cuff tears over time with regard to the publication of the CPGs and prospective clinical trials. Study Design: Cohort study; Level of evidence, 3. Methods: Included in the study were Humana-insured patients in the PearlDiver database with the diagnosis of a full-thickness rotator cuff tear from 2010 to 2015. Patients undergoing rotator cuff repair (CPT-29827, CPT-23410, CPT-23412, CPT-23420) and patients undergoing nonoperative management in the queried years were identified. The incidence of physical therapy (PT), nonsteroidal anti-inflammatory drugs (NSAIDs), and corticosteroid injections was assessed. Results: In 2015, patients with full-thickness rotator cuff tears were less likely to receive a corticosteroid injection (16.5% vs 23.9%, respectively; odds ratio [OR], 0.6; P < .001) or undergo PT (7.8% vs 12.1%, respectively; OR, 0.6; P < .001) before rotator cuff repair in comparison with 2010. Additionally, patients were no more likely to be prescribed NSAIDs before rotator cuff repair in 2015 in comparison with 2010 (OR, 1.0; P = .6). Patients with full-thickness rotator cuff tears were less likely to undergo acromioplasty in 2015 in comparison with 2010 (48.2% vs 76.9%, respectively; OR, 0.4; P < .001); however, the rate of concomitant biceps tenodesis slightly increased (14.8% vs 14.6%, respectively; OR, 1.1; P = .01). Conclusion: From 2010 to 2015, there were changes in the management of full-thickness rotator cuff tears, including decreased preoperative utilization of corticosteroid injections and PT as well as a decrease in concomitant acromioplasty, and the rate of biceps tenodesis slightly increased. As CPGs and prospective investigations continue to proliferate, management practices of patients with full-thickness rotator cuff tears continue to evolve.


Sign in / Sign up

Export Citation Format

Share Document