Neural network prediction of mechanical properties of porous NiTi shape memory alloy

Artificial neural network (ANN) is an intriguing data processing technique. Over the last decade, it was applied widely in the chemistry field, but there were few applications in the porous NiTi shape memory alloy (SMA). In this paper, 32 sets of samples from thermal explosion experiments were used to build a three-layer BP (back propagation) neural network model. According to the registered BP model, the effect of process parameters including heating rate ( ), green density ( ) and particle size of Ti ( d ) on compressive properties of reacted products including ultimate compressive strength ( v D σ ) and ultimate compressive strain (ε ) was analyzed. The predicted results agree with the actual data within reasonable experimental error, which shows that the BP model is a practically very useful tool in the properties analysis and process parameters design of the porous NiTi SMA prepared by thermal explosion method.

Download Full-text

Optimized Neural Network Prediction Model of Shape Memory Alloy and Its Application for Structural Vibration Control

Materials ◽

10.3390/ma14216593 ◽

2021 ◽

Vol 14 (21) ◽

pp. 6593

Author(s):

Meng Zhan ◽

Junsheng Liu ◽

Deli Wang ◽

Xiuyun Chen ◽

Lizhen Zhang ◽

...

Keyword(s):

Neural Network ◽

Mathematical Model ◽

Shape Memory Alloy ◽

Prediction Model ◽

Shape Memory ◽

Structural Vibration ◽

Absorption Effect ◽

Structural Vibration Control ◽

Neural Network Prediction ◽

Network Prediction

The traditional mathematical model of shape memory alloy (SMA) is complicated and difficult to program in numerical analysis. The artificial neural network is a nonlinear modeling method which does not depend on the mathematical model and avoids the inevitable error in the traditional modeling method. In this paper, an optimized neural network prediction model of shape memory alloy and its application for structural vibration control are discussed. The superelastic properties of austenitic SMA wires were tested by experiments. The material property test data were taken as the training samples of the BP neural network, and a prediction model optimized by the genetic algorithm was established. By using the improved genetic algorithm, the position and quantity of the SMA wires were optimized in a three-storey spatial structure, and the dynamic response analysis of the optimal arrangement was carried out. The results show that, compared with the unoptimized neural network prediction model of SMA, the optimized prediction model is in better agreement with the test curve and has higher stability, it can well reflect the effect of loading rate on the superelastic properties of SMA, and is a high precision rate-dependent dynamic prediction model. Moreover, the BP network constitutive model is simple to use and convenient for dynamic simulation analysis of an SMA passive control structure. The controlled structure with optimized SMA wires can inhibit the structural seismic responses more effectively. However, it is not the case that the more SMA wires, the better the shock absorption effect. When SMA wires exceed a certain number, the vibration reduction effect gradually decreases. Therefore, the seismic effect can be reduced economically and effectively only when the number and location of SMA wires are properly configured. When four SMA wires are arranged, the acceptable shock absorption effect is obtained, and the sum of the structural storey drift can be reduced by 44.51%.

Download Full-text