Haüyne: phase transition and high-temperature structures obtained from synchrotron radiation and Rietveld refinements

2004 ◽  
Vol 68 (3) ◽  
pp. 499-513 ◽  
Author(s):  
I. Hassan ◽  
S. M. Antao ◽  
J. B. Parise

AbstractThe structural behaviour of a haüyne with a chemical composition of Na4.35Ca2.28K0.95[Al6Si6O24]- (SO4)2.03, at room pressure and from 33 to 1035°C on heating, was determined by using in situ synchrotron X-ray powder diffraction data (λ = 0.92249(5) Å). The satellite reflections in haüyne are lost at ∼400°C and a true substructure results because of this phase transition. There is a discontinuity in the a unit-cell parameter at ∼585°C. The α parameter increases rapidly and non-linearly to 585°C, but above 585°C, the expansion rate decreases. The percent volume change between 33 and 576°C is 2.0(3)%, and 0.6(3)% between 593 and 1035°C. Between 33 and 1035°C, the Al–O, Si–O and S–O distances are constant. Between 33 and 576°C, the angle of rotation of the AlO4 tetrahedron, jAl, changesfrom 11.5 to 5.8°, while the angle of rotation of the SiO4 tetrahedron, φSi, changesfrom 12.4 to 6.3°. The Al–O–Si bridging angle changesfrom 150.05(2) to 153.08(1)° from 33 to 576°C. Beyond 585°C, φAl and φSi angles remain nearly constant even though the maximum rotation of the tetrahedra is not achieved. Moreover, the Al–O–Si angle continues to increase at a slower rate from 585 to 1035°C by 1.05(2)°. From 33 to ∼585°C, the K atom position migrates at a slower rate than the Na and Ca atoms, and the structure expands at a high rate. Beyond 585°C, all the atomic positions of the interstitial cations (Na+, K+, Ca2+) remain nearly constant and the expansion of the structure is retarded.

2001 ◽  
Vol 34 (3) ◽  
pp. 311-317 ◽  
Author(s):  
F. Sayetat ◽  
A. Prat

An X-ray powder diffractometer, operating in the 87–1000 K temperature range, is described. The experimental procedure and data analysis allow the measurement of small lattice distortions and very small parameter variations with good accuracy. The experiment setup is devoted to the detection of phase transitions, to the determination of thermal expansion curves and to the study of kinetic chemical reactionsin situ. The apparatus has been tested for angular sensitivity and resolution. The tests assess the overall performance of the instrument over the entire range of temperature. The cell parameter of the standard material cubic Na2Ca3Al2F14in the 90–600 K range is given as example. In a study of the thermal expansion of the cell parameter of cubic AgI in the 303–553 K range, a phase transition, of first-order character, is found between 398 and 453 K.


Author(s):  
Rebecca Scatena ◽  
Michał Andrzejewski ◽  
Roger D Johnson ◽  
Piero Macchi

Through in-situ, high-pressure x-ray diffraction experiments we have shown that the homoleptic perovskite-like coordination polymer [(CH3)2NH2]Cu(HCOO)3 undergoes a pressure-induced orbital reordering phase transition above 5.20 GPa. This transition is distinct...


2021 ◽  
Vol 118 (13) ◽  
pp. 132903
Author(s):  
Mao-Hua Zhang ◽  
Changhao Zhao ◽  
Lovro Fulanović ◽  
Jürgen Rödel ◽  
Nikola Novak ◽  
...  

2020 ◽  
Vol 8 (6) ◽  
pp. 3222-3227 ◽  
Author(s):  
Xiao Wang ◽  
Baoqi Wang ◽  
Yuxin Tang ◽  
Ben Bin Xu ◽  
Chu Liang ◽  
...  

In situ polymerization is used to obtain PEDOT tightly coated MnHCF, inhibiting phase transition and Mn dissolution during cycling.


Author(s):  
Weinong W. Chen ◽  
Matthew C. Hudspeth ◽  
Ben Claus ◽  
Niranjan D. Parab ◽  
John T. Black ◽  
...  

Split Hopkinson or Kolsky bars are common high-rate characterization tools for dynamic mechanical behaviour of materials. Stress–strain responses averaged over specimen volume are obtained as a function of strain rate. Specimen deformation histories can be monitored by high-speed imaging on the surface. It has not been possible to track the damage initiation and evolution during the dynamic deformation inside specimens except for a few transparent materials. In this study, we integrated Hopkinson compression/tension bars with high-speed X-ray imaging capabilities. The damage history in a dynamically deforming specimen was monitored in situ using synchrotron radiation via X-ray phase contrast imaging. The effectiveness of the novel union between these two powerful techniques, which opens a new angle for data acquisition in dynamic experiments, is demonstrated by a series of dynamic experiments on a variety of material systems, including particle interaction in granular materials, glass impact cracking, single crystal silicon tensile failure and ligament–bone junction damage.


Polymer ◽  
2019 ◽  
Vol 179 ◽  
pp. 121719 ◽  
Author(s):  
Fengmei Su ◽  
Xiaokang Yang ◽  
Beibei Dong ◽  
Jingyun Zhao ◽  
Fei Lv ◽  
...  

2016 ◽  
Vol 309 ◽  
pp. 122-126 ◽  
Author(s):  
Ikuma Takahashi ◽  
Takuya Mori ◽  
Takahiro Yoshinari ◽  
Yuki Orikasa ◽  
Yukinori Koyama ◽  
...  

2017 ◽  
Vol 102 (3) ◽  
pp. 666-673 ◽  
Author(s):  
Anna Pakhomova ◽  
Leyla Ismailova ◽  
Elena Bykova ◽  
Maxim Bykov ◽  
Tiziana Boffa Ballaran ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document