scholarly journals In situ damage assessment using synchrotron X-rays in materials loaded by a Hopkinson bar

2014 ◽  
Vol 372 (2015) ◽  
pp. 20130191 ◽  
Author(s):  
Weinong W. Chen ◽  
Matthew C. Hudspeth ◽  
Ben Claus ◽  
Niranjan D. Parab ◽  
John T. Black ◽  
...  
Keyword(s):  
High Speed ◽  
Particle Interaction ◽  
Tensile Failure ◽  
High Rate ◽  
X Rays ◽  
Contrast Imaging ◽  
X Ray ◽  
Damage Initiation ◽  
Dynamic Experiments

Split Hopkinson or Kolsky bars are common high-rate characterization tools for dynamic mechanical behaviour of materials. Stress–strain responses averaged over specimen volume are obtained as a function of strain rate. Specimen deformation histories can be monitored by high-speed imaging on the surface. It has not been possible to track the damage initiation and evolution during the dynamic deformation inside specimens except for a few transparent materials. In this study, we integrated Hopkinson compression/tension bars with high-speed X-ray imaging capabilities. The damage history in a dynamically deforming specimen was monitored in situ using synchrotron radiation via X-ray phase contrast imaging. The effectiveness of the novel union between these two powerful techniques, which opens a new angle for data acquisition in dynamic experiments, is demonstrated by a series of dynamic experiments on a variety of material systems, including particle interaction in granular materials, glass impact cracking, single crystal silicon tensile failure and ligament–bone junction damage.

scholarly journals In situ observation of fracture processes in high-strength concretes and limestone using high-speed X-ray phase-contrast imaging

2017 ◽  
Vol 375 (2085) ◽  
pp. 20160178 ◽  
Author(s):  
Niranjan D. Parab ◽  
Zherui Guo ◽  
Matthew Hudspeth ◽  
Benjamin Claus ◽  
Boon Him Lim ◽  
...  
Keyword(s):  
Dynamic Loading ◽  
High Speed ◽  
Phase Contrast ◽  
High Strength ◽  
Phase Contrast Imaging ◽  
In Situ Observation ◽  
Contrast Imaging ◽  
X Ray ◽  
Reactive Powder

The mechanical properties and fracture mechanisms of geomaterials and construction materials such as concrete are reported to be dependent on the loading rates. However, the in situ cracking inside such specimens cannot be visualized using traditional optical imaging methods since the materials are opaque. In this study, the in situ sub-surface failure/damage mechanisms in Cor-Tuf (a reactive powder concrete), a high-strength concrete (HSC) and Indiana limestone under dynamic loading were investigated using high-speed synchrotron X-ray phase-contrast imaging. Dynamic compressive loading was applied using a modified Kolsky bar and fracture images were recorded using a synchronized high-speed synchrotron X-ray imaging set-up. Three-dimensional synchrotron X-ray tomography was also performed to record the microstructure of the specimens before dynamic loading. In the Cor-Tuf and HSC specimens, two different modes of cracking were observed: straight cracking or angular cracking with respect to the direction of loading. In limestone, cracks followed the grain boundaries and voids, ultimately fracturing the specimen. Cracks in HSC were more tortuous than the cracks in Cor-Tuf specimens. The effects of the microstructure on the observed cracking behaviour are discussed. This article is part of the themed issue ‘Experimental testing and modelling of brittle materials at high strain rates’.

scholarly journals Simultaneous X-ray diffraction and phase-contrast imaging for investigating material deformation mechanisms during high-rate loading

2015 ◽  
Vol 22 (1) ◽  
pp. 49-58 ◽  
Author(s):  
M. Hudspeth ◽  
T. Sun ◽  
N. Parab ◽  
Z. Guo ◽  
K. Fezzaa ◽  
...  
Keyword(s):  
High Speed ◽  
Phase Contrast ◽  
Texture Evolution ◽  
High Rate ◽  
Phase Contrast Imaging ◽  
Sufficient Information ◽  
Strain Rates ◽  
Contrast Imaging ◽  
X Ray ◽  
Diffraction Patterns

Using a high-speed camera and an intensified charge-coupled device (ICCD), a simultaneous X-ray imaging and diffraction technique has been developed for studying dynamic material behaviors during high-rate tensile loading. A Kolsky tension bar has been used to pull samples at 1000 s−1and 5000 s−1strain-rates for super-elastic equiatomic NiTi and 1100-O series aluminium, respectively. By altering the ICCD gating time, temporal resolutions of 100 ps and 3.37 µs have been achieved in capturing the diffraction patterns of interest, thus equating to single-pulse and 22-pulse X-ray exposure. Furthermore, the sample through-thickness deformation process has been simultaneously imagedviaphase-contrast imaging. It is also shown that adequate signal-to-noise ratios are achieved for the detected white-beam diffraction patterns, thereby allowing sufficient information to perform quantitative data analysis diffractionviain-house software (WBXRD_GUI). Of current interest is the ability to evaluate crystald-spacing, texture evolution and material phase transitions, all of which will be established from experiments performed at the aforementioned elevated strain-rates.

PHAX-SCAN: Functional integration of a Scanning Electron Microscope and an energy-dispersive x-ray analyser

1989 ◽  
Vol 47 ◽  
pp. 56-57
Author(s):  
Marc H. Peeters ◽  
Max T. Otten
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
High Speed ◽  
High Performance ◽  
Functional Integration ◽  
Energy Dispersive ◽  
X Rays ◽  
X Ray ◽  
High Speed Analysis ◽  
Scanning Electron

Over the past decades, the combination of energy-dispersive analysis of X-rays and scanning electron microscopy has proved to be a powerful tool for fast and reliable elemental characterization of a large variety of specimens. The technique has evolved rapidly from a purely qualitative characterization method to a reliable quantitative way of analysis. In the last 5 years, an increasing need for automation is observed, whereby energy-dispersive analysers control the beam and stage movement of the scanning electron microscope in order to collect digital X-ray images and perform unattended point analysis over multiple locations.The Philips High-speed Analysis of X-rays system (PHAX-Scan) makes use of the high performance dual-processor structure of the EDAX PV9900 analyser and the databus structure of the Philips series 500 scanning electron microscope to provide a highly automated, user-friendly and extremely fast microanalysis system. The software that runs on the hardware described above was specifically designed to provide the ultimate attainable speed on the system.

In Situ Testing and X Rays Radiation Effects of Pt/Bi3.15Nd0.85Ti3O12/Pt Ferroelectric Capacitors

2013 ◽  
Vol 712-715 ◽  
pp. 293-297
Author(s):  
Li Li
Keyword(s):  
Radiation Effects ◽  
Hysteresis Loops ◽  
Electrical Performance ◽  
Hysteresis Curve ◽  
X Rays ◽  
Shanghai Synchrotron Radiation Facility ◽  
X Ray ◽  
In The Beginning ◽  
Ferroelectric Capacitors

Pt/Bi3.15Nd0.85Ti3O12(BNT)/Pt ferroelectric capacitors were monitored using in situ X-ray irradiation with 10 keV at BL14B1 beamline (Shanghai Synchrotron Radiation Facility). BL14B1 combined with a ferroelectric analyzer enabled measurements in situ of electrical performance. The hysteresis curve (PE) of distortion depended on the polarization during irradiation, but the diffracted intensities of the (117) peak did not change in the beginning. ThePEcurve had a negligible change from 2.09×109Gy to 4.45×109Gy. Finally, bothPrandPr+very rapidly increased, but the intensities of (117) decreased. The hysteresis loops were remarkably deformed at the maximum total dose of 4.87×109Gy.

Anin situatomic force microscope for normal-incidence nanofocus X-ray experiments

2016 ◽  
Vol 23 (5) ◽  
pp. 1110-1117 ◽  
Author(s):  
M. V. Vitorino ◽  
Y. Fuchs ◽  
T. Dane ◽  
M. S. Rodrigues ◽  
M. Rosenthal ◽  
...  
Keyword(s):  
Thin Film ◽  
Atomic Force Microscope ◽  
High Speed ◽  
Normal Incidence ◽  
Organic Thin Film ◽  
X Ray ◽  
Atomic Force ◽  
Synchrotron Beamlines

A compact high-speed X-ray atomic force microscope has been developed forin situuse in normal-incidence X-ray experiments on synchrotron beamlines, allowing for simultaneous characterization of samples in direct space with nanometric lateral resolution while employing nanofocused X-ray beams. In the present work the instrument is used to observe radiation damage effects produced by an intense X-ray nanobeam on a semiconducting organic thin film. The formation of micrometric holes induced by the beam occurring on a timescale of seconds is characterized.

Applications of High-Resolution Powder X-Ray Diffraction

2007 ◽  
Vol 130 ◽  
pp. 7-14 ◽  
Author(s):  
Andrew N. Fitch
Keyword(s):  
High Resolution ◽  
Synchrotron Radiation ◽  
Powder Diffraction ◽  
X Rays ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
X Ray ◽  
Structural Characterisation ◽  
Pdf Analysis

The highly-collimated, intense X-rays produced by a synchrotron radiation source can be harnessed to build high-resolution powder diffraction instruments with a wide variety of applications. The general advantages of using synchrotron radiation for powder diffraction are discussed and illustrated with reference to the structural characterisation of crystalline materials, atomic PDF analysis, in-situ and high-throughput studies where the structure is evolving between successive scans, and the measurement of residual strain in engineering components.

scholarly journals In Situ Analysis of Laser Powder Bed Fusion Using Simultaneous High-Speed Infrared and X-ray Imaging

JOM ◽  
2020 ◽  
Vol 73 (1) ◽  
pp. 201-211 ◽  
Author(s):  
Benjamin Gould ◽  
Sarah Wolff ◽  
Niranjan Parab ◽  
Cang Zhao ◽  
Maria Cinta Lorenzo-Martin ◽  
...  
Keyword(s):  
High Speed ◽  
In Situ Analysis ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
X Ray ◽  
X Ray Imaging

3D Investigation of Fatigue Crack Morphology and Crack Growth of Iron-Based Materials via Synchrotron X-Ray CT

2015 ◽  
Vol 833 ◽  
pp. 154-157
Author(s):  
Jiang Ying Meng ◽  
Min An Chen ◽  
Shuai Liu ◽  
Fu Cheng Zhang ◽  
Li He Qian
Keyword(s):  
Fatigue Crack ◽  
Crack Growth ◽  
Manganese Steel ◽  
Crack Growth Behavior ◽  
Contrast Imaging ◽  
Shanghai Synchrotron Radiation Facility ◽  
3D Images ◽  
X Ray ◽  
Crack Morphology

The present paper addresses a 3D investigation of a complicated fatigue crack profile and crack growth behavior in cast Hadfield high manganese steel by in-situ X-ray computed tomography (CT) experiments. In-situ loading experiments were performed on fatigue pre-cracked samples at the X-ray beamline BL13W1 of Shanghai synchrotron radiation facility in China, and high-resolution phase contrast imaging technique was applied to obtain the 3D images. Based on the rendered 3D images at varied loading levels, various crack features and the interactions of the fatigue crack with casting pores were identified and analyzed.

scholarly journals Investigation of fragment reconstruction accuracy with in situ few-view flash x-ray high-speed computed tomography (HSCT)

2019 ◽  
Vol 30 (6) ◽  
pp. 065401
Author(s):  
Stefan Moser ◽  
Siegfried Nau ◽  
Victoria Heusinger ◽  
Michael Fiederle
Keyword(s):  
Computed Tomography ◽  
High Speed ◽  
Reconstruction Accuracy ◽  
X Ray
Sign in / Sign up

Export Citation Format

Share Document