scholarly journals LeafGo: Leaf to Genome, a quick workflow to produce high-quality de novo plant genomes using long-read sequencing technology

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Patrick Driguez ◽  
Salim Bougouffa ◽  
Karen Carty ◽  
Alexander Putra ◽  
Kamel Jabbari ◽  
...  
Keyword(s):  
De Novo ◽  
Plant Genome ◽  
Time Cost ◽  
Sequencing Technology ◽  
High Quality ◽  
Plant Genomes ◽  
Long Read ◽  
Generate Plant ◽  
Sequencing Platforms ◽  
Chromosome Level

AbstractCurrently, different sequencing platforms are used to generate plant genomes and no workflow has been properly developed to optimize time, cost, and assembly quality. We present LeafGo, a complete de novo plant genome workflow, that starts from tissue and produces genomes with modest laboratory and bioinformatic resources in approximately 7 days and using one long-read sequencing technology. LeafGo is optimized with ten different plant species, three of which are used to generate high-quality chromosome-level assemblies without any scaffolding technologies. Finally, we report the diploid genomes of Eucalyptus rudis and E. camaldulensis and the allotetraploid genome of Arachis hypogaea.

scholarly journals Improvements in the sequencing and assembly of plant genomes

Gigabyte ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-10 ◽  
Author(s):  
Priyanka Sharma ◽  
Othman Al-Dossary ◽  
Bader Alsubaie ◽  
Ibrahim Al-Mssallem ◽  
Onkar Nath ◽  
...  
Keyword(s):  
Sequence Data ◽  
Linear Increase ◽  
Persea Americana ◽  
Plant Genome ◽  
Sequencing Technology ◽  
Genome Coverage ◽  
Plant Genomes ◽  
Oxford Nanopore ◽  
Long Read ◽  
Using Data

Advances in DNA sequencing have made it easier to sequence and assemble plant genomes. Here, we extend an earlier study, and compare recent methods for long read sequencing and assembly. Updated Oxford Nanopore Technology software improved assemblies. Using more accurate sequences produced by repeated sequencing of the same molecule (Pacific Biosciences HiFi) resulted in less fragmented assembly of sequencing reads. Using data for increased genome coverage resulted in longer contigs, but reduced total assembly length and improved genome completeness. The original model species, Macadamia jansenii, was also compared with three other Macadamia species, as well as avocado (Persea americana) and jojoba (Simmondsia chinensis). In these angiosperms, increasing sequence data volumes caused a linear increase in contig size, decreased assembly length and further improved already high completeness. Differences in genome size and sequence complexity influenced the success of assembly. Advances in long read sequencing technology continue to improve plant genome sequencing and assembly. However, results were improved by greater genome coverage, with the amount needed to achieve a particular level of assembly being species dependent.

scholarly journals High-Quality de novo Chromosome-Level Genome Assembly of a Single Bombyx mori With BmNPV Resistance by a Combination of PacBio Long-Read Sequencing, Illumina Short-Read Sequencing, and Hi-C Sequencing

2021 ◽  
Vol 12 ◽  
Author(s):  
Min Tang ◽  
Suqun He ◽  
Xun Gong ◽  
Peng Lü ◽  
Rehab H. Taha ◽  
...  
Keyword(s):  
Bombyx Mori ◽  
Genome Assembly ◽  
De Novo ◽  
High Quality ◽  
Single Strain ◽  
Short Read ◽  
Short Read Sequencing ◽  
Long Read ◽  
Reference Genomes ◽  
Chromosome Level

The reference genomes of Bombyx mori (B. mori), Silkworm Knowledge-based database (SilkDB) and SilkBase, have served as the gold standard for nearly two decades. Their use has fundamentally shaped model organisms and accelerated relevant studies on lepidoptera. However, the current reference genomes of B. mori do not accurately represent the full set of genes for any single strain. As new genome-wide sequencing technologies have emerged and the cost of high-throughput sequencing technology has fallen, it is now possible for standard laboratories to perform full-genome assembly for specific strains. Here we present a high-quality de novo chromosome-level genome assembly of a single B. mori with nuclear polyhedrosis virus (BmNPV) resistance through the integration of PacBio long-read sequencing, Illumina short-read sequencing, and Hi-C sequencing. In addition, regular bioinformatics analyses, such as gene family, phylogenetic, and divergence analyses, were performed. The sample was from our unique B. mori species (NB), which has strong inborn resistance to BmNPV. Our genome assembly showed good collinearity with SilkDB and SilkBase and particular regions. To the best of our knowledge, this is the first genome assembly with BmNPV resistance, which should be a more accurate insect model for resistance studies.

scholarly journals Whole-genome sequencing and de novo assembly of a 2019 novel coronavirus (SARS-CoV-2) strain isolated in Vietnam

2020 ◽  
Vol 18 (2) ◽  
pp. 197-208
Author(s):  
Le Tung Lam ◽  
Nguyen Trung Hieu ◽  
Nguyen Hong Trang ◽  
Ho Thi Thuong ◽  
Tran Huyen Linh ◽  
...  
Keyword(s):  
Whole Genome Sequencing ◽  
Genome Sequencing ◽  
Sanger Sequencing ◽  
De Novo ◽  
Whole Genome ◽  
Smrt Sequencing ◽  
Sequencing Technology ◽  
High Quality ◽  
Long Read ◽  
Novel Coronavirus

The pandemic COVID-19 caused by the virus SARS-CoV-2 has devastated countries worldwide, infecting more than 4.5 million people and leading to more than 300,000 deaths as of May 16th, 2020. Whole-genome sequencing (WGS) is an effective tool to monitor emerging strains and provide information for intervention, thus help to inform outbreak control decisions. Here, we reported the first effort to sequence and de novo assemble the whole genome of SARS-CoV-2 using PacBio’s SMRT sequencing technology in Vietnam. We also presented the annotation results and a brief analysis of the variants found in our SARS-CoV-2 strain, which was isolated from a Vietnamese patient. The sequencing was successfully completed and de novo assembled in less than 30 hours, resulting in one contig with no gap and a length of 29,766 bp. All detected variants as compared to the NCBI reference were highly accurate, as confirmed by Sanger sequencing. The results have shown the potential of long read sequencing to provide high quality WGS data to support public health responses and advance understanding of this and future pandemics.

scholarly journals De-novo chromosome level assembly of plant genomes from long read sequence data

2021 ◽  
Author(s):  
Priyanka Sharma ◽  
Ardashir Kharabian Masouleh ◽  
Bruce Topp ◽  
Agnelo Furtado ◽  
Robert J. Henry
Keyword(s):  
De Novo ◽  
Sequence Data ◽  
Genetic Maps ◽  
Sequence Contigs ◽  
Plant Genomes ◽  
Proximity Analysis ◽  
Long Reads ◽  
A Genome ◽  
Long Read ◽  
Chromosome Level

SummaryRecent advances in the sequencing and assembly of plant genomes have allowed the generation of genomes with increasing contiguity and sequence accuracy. The chromosome level assembly of the contigs generated from long read sequencing has involved the use of proximity analysis (Hi-C) or traditional genetic maps to guide the placement of sequence contigs within chromosomes. The development of highly accurate long reads by repeated sequencing of circularized DNA (PacBio HiFi) has greatly increased the size of contigs. We now report the use of HiFiasm to assemble the genome of Macadamia jansenii. a genome that has been used as model to test sequencing and assembly. This achieved almost complete chromosome level assembly from the sequence data alone without the need for higher level chromosome map information. Eight of the 14 chromosomes were represented by a single large contig and the other 6 assembled into 2-4 main contigs. The small number of chromosome breaks appear to be due to highly repetitive regions of ribosomal genes that cannot be assembled by these approaches. De novo assembly of near complete chromosome level plant genomes now seems possible using these sequencing and assembly tools. Further targeted strategies might allow these remaining gaps to be closed.Significance statement (of up to two sentences)De novo assembly of near complete chromosome level plant genomes is now possible using current long read sequencing and assembly tools.

scholarly journals Chromosome-level assembly of Drosophila bifasciata reveals important karyotypic transition of the X chromosome

2019 ◽  
Author(s):  
Ryan Bracewell ◽  
Anita Tran ◽  
Kamalakar Chatla ◽  
Doris Bachtrog
Keyword(s):  
X Chromosome ◽  
Genome Assembly ◽  
De Novo ◽  
Pericentromeric Region ◽  
Species Group ◽  
Chromosome 15 ◽  
Protein Coding ◽  
Protein Coding Genes ◽  
Long Read ◽  
Chromosome Level

ABSTRACTThe Drosophila obscura species group is one of the most studied clades of Drosophila and harbors multiple distinct karyotypes. Here we present a de novo genome assembly and annotation of D. bifasciata, a species which represents an important subgroup for which no high-quality chromosome-level genome assembly currently exists. We combined long-read sequencing (Nanopore) and Hi-C scaffolding to achieve a highly contiguous genome assembly approximately 193Mb in size, with repetitive elements constituting 30.1% of the total length. Drosophila bifasciata harbors four large metacentric chromosomes and the small dot, and our assembly contains each chromosome in a single scaffold, including the highly repetitive pericentromere, which were largely composed of Jockey and Gypsy transposable elements. We annotated a total of 12,821 protein-coding genes and comparisons of synteny with D. athabasca orthologs show that the large metacentric pericentromeric regions of multiple chromosomes are conserved between these species. Importantly, Muller A (X chromosome) was found to be metacentric in D. bifasciata and the pericentromeric region appears homologous to the pericentromeric region of the fused Muller A-AD (XL and XR) of pseudoobscura/affinis subgroup species. Our finding suggests a metacentric ancestral X fused to a telocentric Muller D and created the large neo-X (Muller A-AD) chromosome ∼15 MYA. We also confirm the fusion of Muller C and D in D. bifasciata and show that it likely involved a centromere-centromere fusion.

scholarly journals LeafGo: Leaf to Genome, a quick workflow to produce high-quality De novo genomes with Third Generation Sequencing technology

2021 ◽  
Author(s):  
Patrick Driguez ◽  
Salim Bougouffa ◽  
Karen Carty ◽  
Alexander Putra ◽  
Kamel Jabbari ◽  
...  
Keyword(s):  
De Novo ◽  
Rapid Development ◽  
Plant Genome ◽  
Plant Genomics ◽  
High Quality ◽  
High Molecular Weight Dna ◽  
Tissue Samples ◽  
Sequencing Technologies ◽  
The Cost ◽  
New Generation

AbstractRecent years have witnessed a rapid development of sequencing technologies. Fundamental differences and limitations among various platforms impact the time, the cost and the accuracy for sequencing whole genomes. Here we designed a complete de novo plant genome generation workflow that starts from plant tissue samples and produces high-quality draft genomes with relatively modest laboratory and bioinformatic resources within seven days. To optimize our workflow we selected different species of plants which were used to extract high molecular weight DNA, to make PacBio and ONT libraries for sequencing with the Sequel I, Sequel II and GridION platforms. We assembled high-quality draft genomes of two different Eucalyptus species E. rudis, and E. camaldulensis to chromosome level without using additional scaffolding technologies. For the rapid production of de novo genome assembly of plant species we showed that our DNA extraction protocol followed by PacBio high fidelity sequencing, and assembly with new generation assemblers such as hifiasm produce excellent results. Our findings will be a valuable benchmark for groups planning wet- and dry-lab plant genomics research and for high throughput plant genomics initiatives.

scholarly journals De novo assembly of a Tibetan genome and identification of novel structural variants associated with high-altitude adaptation

2019 ◽  
Vol 7 (2) ◽  
pp. 391-402 ◽  
Author(s):  
Yaoxi He ◽  
Haiyi Lou ◽  
Chaoying Cui ◽  
Lian Deng ◽  
Yang Gao ◽  
...  
Keyword(s):  
High Altitude ◽  
De Novo Assembly ◽  
De Novo ◽  
Population Analysis ◽  
Extreme Environments ◽  
Structural Variants ◽  
Base Pairs ◽  
High Quality ◽  
Long Read ◽  
Altitude Adaptation

Abstract Structural variants (SVs) may play important roles in human adaptation to extreme environments such as high altitude but have been under-investigated. Here, combining long-read sequencing with multiple scaffolding techniques, we assembled a high-quality Tibetan genome (ZF1), with a contig N50 length of 24.57 mega-base pairs (Mb) and a scaffold N50 length of 58.80 Mb. The ZF1 assembly filled 80 remaining N-gaps (0.25 Mb in total length) in the reference human genome (GRCh38). Markedly, we detected 17 900 SVs, among which the ZF1-specific SVs are enriched in GTPase activity that is required for activation of the hypoxic pathway. Further population analysis uncovered a 163-bp intronic deletion in the MKL1 gene showing large divergence between highland Tibetans and lowland Han Chinese. This deletion is significantly associated with lower systolic pulmonary arterial pressure, one of the key adaptive physiological traits in Tibetans. Moreover, with the use of the high-quality de novo assembly, we observed a much higher rate of genome-wide archaic hominid (Altai Neanderthal and Denisovan) shared non-reference sequences in ZF1 (1.32%–1.53%) compared to other East Asian genomes (0.70%–0.98%), reflecting a unique genomic composition of Tibetans. One such archaic hominid shared sequence—a 662-bp intronic insertion in the SCUBE2 gene—is enriched and associated with better lung function (the FEV1/FVC ratio) in Tibetans. Collectively, we generated the first high-resolution Tibetan reference genome, and the identified SVs may serve as valuable resources for future evolutionary and medical studies.

scholarly journals Chromosome-Level Assembly of Drosophila bifasciata Reveals Important Karyotypic Transition of the X Chromosome

2020 ◽  
Vol 10 (3) ◽  
pp. 891-897 ◽  
Author(s):  
Ryan Bracewell ◽  
Anita Tran ◽  
Kamalakar Chatla ◽  
Doris Bachtrog
Keyword(s):  
X Chromosome ◽  
Genome Assembly ◽  
De Novo ◽  
Pericentromeric Region ◽  
Species Group ◽  
Chromosome 15 ◽  
Protein Coding ◽  
Protein Coding Genes ◽  
Long Read ◽  
Chromosome Level

The Drosophila obscura species group is one of the most studied clades of Drosophila and harbors multiple distinct karyotypes. Here we present a de novo genome assembly and annotation of D. bifasciata, a species which represents an important subgroup for which no high-quality chromosome-level genome assembly currently exists. We combined long-read sequencing (Nanopore) and Hi-C scaffolding to achieve a highly contiguous genome assembly approximately 193 Mb in size, with repetitive elements constituting 30.1% of the total length. Drosophila bifasciata harbors four large metacentric chromosomes and the small dot, and our assembly contains each chromosome in a single scaffold, including the highly repetitive pericentromeres, which were largely composed of Jockey and Gypsy transposable elements. We annotated a total of 12,821 protein-coding genes and comparisons of synteny with D. athabasca orthologs show that the large metacentric pericentromeric regions of multiple chromosomes are conserved between these species. Importantly, Muller A (X chromosome) was found to be metacentric in D. bifasciata and the pericentromeric region appears homologous to the pericentromeric region of the fused Muller A-AD (XL and XR) of pseudoobscura/affinis subgroup species. Our finding suggests a metacentric ancestral X fused to a telocentric Muller D and created the large neo-X (Muller A-AD) chromosome ∼15 MYA. We also confirm the fusion of Muller C and D in D. bifasciata and show that it likely involved a centromere-centromere fusion.

scholarly journals Improving the Chromosome-Level Genome Assembly of the Siamese Fighting Fish (Betta splendens) in a University Master’s Course

2020 ◽  
Vol 10 (7) ◽  
pp. 2179-2183 ◽  
Author(s):  
Stefan Prost ◽  
Malte Petersen ◽  
Martin Grethlein ◽  
Sarah Joy Hahn ◽  
Nina Kuschik-Maczollek ◽  
...  
Keyword(s):  
Genome Assembly ◽  
High Throughput Sequencing ◽  
Siamese Fighting Fish ◽  
Betta Splendens ◽  
High Quality ◽  
Sequencing Platform ◽  
Sequencing Technologies ◽  
Oxford Nanopore ◽  
Long Read ◽  
Chromosome Level

Ever decreasing costs along with advances in sequencing and library preparation technologies enable even small research groups to generate chromosome-level assemblies today. Here we report the generation of an improved chromosome-level assembly for the Siamese fighting fish (Betta splendens) that was carried out during a practical university master’s course. The Siamese fighting fish is a popular aquarium fish and an emerging model species for research on aggressive behavior. We updated the current genome assembly by generating a new long-read nanopore-based assembly with subsequent scaffolding to chromosome-level using previously published Hi-C data. The use of ∼35x nanopore-based long-read data sequenced on a MinION platform (Oxford Nanopore Technologies) allowed us to generate a baseline assembly of only 1,276 contigs with a contig N50 of 2.1 Mbp, and a total length of 441 Mbp. Scaffolding using the Hi-C data resulted in 109 scaffolds with a scaffold N50 of 20.7 Mbp. More than 99% of the assembly is comprised in 21 scaffolds. The assembly showed the presence of 96.1% complete BUSCO genes from the Actinopterygii dataset indicating a high quality of the assembly. We present an improved full chromosome-level assembly of the Siamese fighting fish generated during a university master’s course. The use of ∼35× long-read nanopore data drastically improved the baseline assembly in terms of continuity. We show that relatively in-expensive high-throughput sequencing technologies such as the long-read MinION sequencing platform can be used in educational settings allowing the students to gain practical skills in modern genomics and generate high quality results that benefit downstream research projects.

scholarly journals A high-quality genome assembly from a single, field-collected spotted lanternfly (Lycorma delicatula) using the PacBio Sequel II system

GigaScience ◽  
2019 ◽  
Vol 8 (10) ◽  
Author(s):  
Sarah B Kingan ◽  
Julie Urban ◽  
Christine C Lambert ◽  
Primo Baybayan ◽  
Anna K Childers ◽  
...  
Keyword(s):  
Invasive Species ◽  
Genome Assembly ◽  
De Novo ◽  
Fragment Size ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Lycorma Delicatula ◽  
Long Read ◽  
Genome Assemblies ◽  
High Quality Genome

ABSTRACT Background A high-quality reference genome is an essential tool for applied and basic research on arthropods. Long-read sequencing technologies may be used to generate more complete and contiguous genome assemblies than alternate technologies; however, long-read methods have historically had greater input DNA requirements and higher costs than next-generation sequencing, which are barriers to their use on many samples. Here, we present a 2.3 Gb de novo genome assembly of a field-collected adult female spotted lanternfly (Lycorma delicatula) using a single Pacific Biosciences SMRT Cell. The spotted lanternfly is an invasive species recently discovered in the northeastern United States that threatens to damage economically important crop plants in the region. Results The DNA from 1 individual was used to make 1 standard, size-selected library with an average DNA fragment size of ∼20 kb. The library was run on 1 Sequel II SMRT Cell 8M, generating a total of 132 Gb of long-read sequences, of which 82 Gb were from unique library molecules, representing ∼36× coverage of the genome. The assembly had high contiguity (contig N50 length = 1.5 Mb), completeness, and sequence level accuracy as estimated by conserved gene set analysis (96.8% of conserved genes both complete and without frame shift errors). Furthermore, it was possible to segregate more than half of the diploid genome into the 2 separate haplotypes. The assembly also recovered 2 microbial symbiont genomes known to be associated with L. delicatula, each microbial genome being assembled into a single contig. Conclusions We demonstrate that field-collected arthropods can be used for the rapid generation of high-quality genome assemblies, an attractive approach for projects on emerging invasive species, disease vectors, or conservation efforts of endangered species.

Sign in / Sign up

Export Citation Format

Share Document