Imaging conditions for prestack reverse-time migration

Geophysics ◽  
2008 ◽  
Vol 73 (3) ◽  
pp. S81-S89 ◽  
Author(s):  
Sandip Chattopadhyay ◽  
George A. McMechan
Keyword(s):  
Amplitude Ratio ◽  
Reflection Coefficients ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Imaging Condition ◽  
Angle Dependence ◽  
Time Migration ◽  
Dependence Scale ◽  
Correct Angle ◽  
Imaging Conditions

Numerical implementations of six imaging conditions for prestack reverse-time migration show widely differing ability to provide accurate, angle-dependent estimates of reflection coefficients. Evaluation is in the context of a simple, one-interface acoustic model. Only reflection coefficients estimated by normalization of a crosscorrelation image by source illumination or by receiver-/source-wavefield amplitude ratio have the correct angle dependence, scale factor, and sign and the required (dimensionless) units; thus, these are the preferred imaging-condition algorithms. To obtain accurate image amplitudes, source- and receiver-wavefield extrapolations must be able to accurately reconstruct their respective wavefields at the target reflector.

Imaging conditions for elastic reverse time migration

Geophysics ◽  
2019 ◽  
Vol 84 (2) ◽  
pp. S95-S111 ◽  
Author(s):  
Wei Zhang ◽  
Ying Shi
Keyword(s):  
Decomposition Method ◽  
Inner Product ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
S Wave ◽  
Imaging Condition ◽  
Subsurface Structures ◽  
Time Migration ◽  
Imaging Conditions ◽  
Wave Modes

Elastic reverse time migration (RTM) has the ability to retrieve accurately migrated images of complex subsurface structures by imaging the multicomponent seismic data. However, the imaging condition applied in elastic RTM significantly influences the quality of the migrated images. We evaluated three kinds of imaging conditions in elastic RTM. The first kind of imaging condition involves the crosscorrelation between the Cartesian components of the particle-velocity wavefields to yield migrated images of subsurface structures. An alternative crosscorrelation imaging condition between the separated pure wave modes obtained by a Helmholtz-like decomposition method could produce reflectivity images with explicit physical meaning and fewer crosstalk artifacts. A drawback of this approach, though, was that the polarity reversal of the separated S-wave could cause destructive interference in the converted-wave image after stacking over multiple shots. Unlike the conventional decomposition method, the elastic wavefields can also be decomposed in the vector domain using the decoupled elastic wave equation, which preserves the amplitude and phase information of the original elastic wavefields. We have developed an inner-product imaging condition to match the vector-separated P- and S-wave modes to obtain scalar reflectivity images of the subsurface. Moreover, an auxiliary P-wave stress image can supplement the elastic imaging. Using synthetic examples with a layered model, the Marmousi 2 model, and a fault model, we determined that the inner-product imaging condition has prominent advantages over the other two imaging conditions and generates images with preserved amplitude and phase attributes.

Polarity-reversal correction for vector-based elastic reverse time migration

Geophysics ◽  
2021 ◽  
Vol 86 (1) ◽  
pp. S45-S58
Author(s):  
Kai Yang ◽  
Xingpeng Dong ◽  
Jianfeng Zhang
Keyword(s):  
Polarity Reversal ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Reversal Problem ◽  
Imaging Condition ◽  
Time Migration ◽  
Sign Change ◽  
Large Opening ◽  
Dot Product ◽  
Imaging Conditions

Polarity reversal is a well-known problem in elastic reverse time migration, and it is closely related to the imaging conditions. The dot product of source and receiver wavefields is a stable and efficient way to construct scalar imaging conditions for decomposed elastic vector wavefields. However, for PP images, the dot product introduces an angle-dependent factor that will change the polarity of image amplitudes at large opening angles, and it is also contaminated by low-wavenumber artifacts when sharp contrasts exist in the velocity model. Those two problems can be suppressed by muting the reflections with large opening angles at the expense of losing useful information. We have developed an elastic inverse-scattering imaging condition that can retain the initial polarity of the image amplitude and significantly reduce the low-wavenumber noise. For PS images, much attention is paid to the polarity-reversal problem at the normal incidence, and the dot-product-based imaging condition successfully avoids this kind of polarity reversal. There is another polarity-reversal problem arising from the sign change of the PS reflection coefficient at the Brewster angle. However, this sign change is often neglected in the construction of a stacked PS image, which will lead to reversed or distorted phases after stacking. We suggested using the S-wave impedance kernel used in elastic full-waveform inversion but only in the PS mode as an alternative to the dot-product imaging condition to alleviate this kind of polarity-reversal problem. In addition to dot-product-based imaging conditions, we analytically compare divergence- and curl-based imaging conditions and the elastic energy norm-based imaging condition with the presented imaging conditions to identify their advantages and weaknesses. Two numerical examples on a two-layer model and the SEAM 2D model are used to illustrate the effectiveness and advantages of the presented imaging conditions in suppressing low-wavenumber noise and correcting the polarity-reversal problem.

Vector-based elastic reverse time migration based on scalar imaging condition

Geophysics ◽  
2017 ◽  
Vol 82 (2) ◽  
pp. S111-S127 ◽  
Author(s):  
Qizhen Du ◽  
ChengFeng Guo ◽  
Qiang Zhao ◽  
Xufei Gong ◽  
Chengxiang Wang ◽  
...  
Keyword(s):  
Alternative Methods ◽  
Polarity Reversal ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
S Wave ◽  
Converted Wave ◽  
Imaging Condition ◽  
Time Migration ◽  
Wavefield Separation ◽  
Wave Modes

The scalar images (PP, PS, SP, and SS) of elastic reverse time migration (ERTM) can be generated by applying an imaging condition as crosscorrelation of pure wave modes. In conventional ERTM, Helmholtz decomposition is commonly applied in wavefield separation, which leads to a polarity reversal problem in converted-wave images because of the opposite polarity distributions of the S-wavefields. Polarity reversal of the converted-wave image will cause destructive interference when stacking over multiple shots. Besides, in the 3D case, the curl calculation generates a vector S-wave, which makes it impossible to produce scalar PS, SP, and SS images with the crosscorrelation imaging condition. We evaluate a vector-based ERTM (VB-ERTM) method to address these problems. In VB-ERTM, an amplitude-preserved wavefield separation method based on decoupled elastic wave equation is exploited to obtain the pure wave modes. The output separated wavefields are both vectorial. To obtain the scalar images, the scalar imaging condition in which the scalar product of two vector wavefields with source-normalized illumination is exploited to produce scalar images instead of correlating Cartesian components or magnitude of the vector P- and S-wave modes. Compared with alternative methods for correcting the polarity reversal of PS and SP images, our ERTM solution is more stable and simple. Besides these four scalar images, the VB-ERTM method generates another PP-mode image by using the auxiliary stress wavefields. Several 2D and 3D numerical examples are evaluated to demonstrate the potential of our ERTM method.

Reducing artifacts of elastic reverse time migration by the deprimary technique

Geophysics ◽  
2018 ◽  
Vol 83 (6) ◽  
pp. S569-S577 ◽  
Author(s):  
Yang Zhao ◽  
Houzhu Zhang ◽  
Jidong Yang ◽  
Tong Fei
Keyword(s):  
Complex Function ◽  
Noise Removal ◽  
Pure Mode ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
S Wave ◽  
Imaging Condition ◽  
Velocity Models ◽  
Time Migration ◽  
Wavefield Decomposition

Using the two-way elastic-wave equation, elastic reverse time migration (ERTM) is superior to acoustic RTM because ERTM can handle mode conversions and S-wave propagations in complex realistic subsurface. However, ERTM results may not only contain classical backscattering noises, but they may also suffer from false images associated with primary P- and S-wave reflections along their nonphysical paths. These false images are produced by specific wave paths in migration velocity models in the presence of sharp interfaces or strong velocity contrasts. We have addressed these issues explicitly by introducing a primary noise removal strategy into ERTM, in which the up- and downgoing waves are efficiently separated from the pure-mode vector P- and S-wavefields during source- and receiver-side wavefield extrapolation. Specifically, we investigate a new method of vector wavefield decomposition, which allows us to produce the same phases and amplitudes for the separated P- and S-wavefields as those of the input elastic wavefields. A complex function involved with the Hilbert transform is used in up- and downgoing wavefield decomposition. Our approach is cost effective and avoids the large storage of wavefield snapshots that is required by the conventional wavefield separation technique. A modified dot-product imaging condition is proposed to produce multicomponent PP-, PS-, SP-, and SS-images. We apply our imaging condition to two synthetic models, and we demonstrate the improvement on the image quality of ERTM.

scholarly journals Application of the continuous wavelet transform in the extraction of directional data on RTM imaging condition wavefields

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Juan Guillermo Paniagua Castrillón ◽  
Olga Lucía Quintero- Montoya
Keyword(s):  
Wavelet Transform ◽  
Continuous Wavelet Transform ◽  
Low Frequency ◽  
Continuous Wavelet ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Model Quality ◽  
Directional Information ◽  
Imaging Condition ◽  
Time Migration

Low-frequency artifacts in reverse time migration result from unwanted cross-correlation of the source and receiver wavefields at non-reflecting points along ray-paths. These artifacts can hide important details in migrated models and increase poor interpretation risk. Some methods have been proposed to avoid or reduce the number of these artifacts, preserving reflections, and improving model quality, implementing other strategies such as modification of the wave equation, proposing other imaging conditions, and using image filtering techniques. One of these methods uses wavefield decomposition, correlating components of the wavefields that propagate in opposite directions. We propose a method for extracting directional information from the RTM imaging condition wavefields to obtain characteristics allowing for better, more refined imaging. The method works by separating directional information about the wavefields based on the continuous wavelet transform (CWT), and the analysis of the main changes on the frequency content revealed within the scalogram obtained by a Gaussian wavelet family. Through numerical applications, we demonstrate that this method can effectively remove undesired artifacts in migrated images. In addition, we use the Laguerre-Gauss filtering to improve the results obtained with the proposed method.

Elastic reverse‐time migration

Geophysics ◽  
1987 ◽  
Vol 52 (10) ◽  
pp. 1365-1375 ◽  
Author(s):  
Wen‐Fong Chang ◽  
George A. McMechan
Keyword(s):  
Finite Difference ◽  
Vertical Component ◽  
Common Source ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Imaging Condition ◽  
Time Migration ◽  
Two Component ◽  
Synthetic Test ◽  
Data Extrapolation

Elastic, prestack, reverse‐time, finite‐difference migration of two‐component seismic surface data requires data extrapolation and application of an imaging condition. Data extrapolation involves synchronous driving of the vertical‐component and horizontal‐component finite‐difference meshes with the time reverse of the recorded vertical and horizontal traces, respectively. Extrapolation uses the coupled elastic wave equation for variable velocity solved with a second‐order, explicit finite‐difference scheme. The imaging condition at any point in the grid is the one‐way traveltime from the source to that point. Elastic migrations of both synthetic test data and real two‐component common‐source gathers produce simpler images than acoustic migrations because of the coalescing of double reflections (compressional waves and shear waves) into single loci.

Sign in / Sign up

Export Citation Format

Share Document