Which parameterization is suitable for acoustic vertical transverse isotropic full waveform inversion? Part 2: Synthetic and real data case studies from Valhall

Geophysics ◽  
2013 ◽  
Vol 78 (2) ◽  
pp. R107-R124 ◽  
Author(s):  
Yaser Gholami ◽  
Romain Brossier ◽  
Stéphane Operto ◽  
Vincent Prieux ◽  
Alessandra Ribodetti ◽  
...  
Keyword(s):  
Waveform Inversion ◽  
Real Data ◽  
Velocity Model ◽  
Oil Field ◽  
Full Waveform Inversion ◽  
Trade Off ◽  
Wave Speeds ◽  
Wide Aperture ◽  
Full Waveform ◽  
Transverse Isotropic

It is necessary to account for anisotropy in full waveform inversion (FWI) of wide-azimuth and wide-aperture seismic data in most geologic environments, for correct depth positioning of reflectors, and for reliable estimations of wave speeds as a function of the direction of propagation. In this framework, choosing a suitable anisotropic subsurface parameterization is a central issue in monoparameter and multiparameter FWI. This is because this parameterization defines the influence of each physical parameter class on the data as a function of the scattering angle, and hence the resolution of the parameter reconstruction, and on the potential trade-off between different parameter classes. We apply monoparameter and multiparameter frequency-domain acoustic vertical transverse isotropic FWI to synthetic and real wide-aperture data, representative of the Valhall oil field. We first show that reliable monoparameter FWI can be performed to build a high-resolution velocity model (for the vertical, the horizontal, or normal move-out velocity), provided that the background models of two Thomsen parameters describe the long wavelengths of the subsurface sufficiently accurately. Alternatively, we show the feasibility of the joint reconstruction of two wave speeds (e.g., the vertical and horizontal wave speeds) with limited trade-off effects, while Thomsen parameter [Formula: see text] is kept fixed during the inversion. The influence of the wave speeds on the data for a limited range of scattering angles when combined each other can, however, significantly hamper the resolution with which the two wave speeds are imaged. These conclusions inferred from the application to the real data are fully consistent with those inferred from the theoretical parameterization analysis of acoustic vertical transverse isotropic FWI performed in the companion report.

Which parameterization is suitable for acoustic vertical transverse isotropic full waveform inversion? Part 1: Sensitivity and trade-off analysis

Geophysics ◽  
2013 ◽  
Vol 78 (2) ◽  
pp. R81-R105 ◽  
Author(s):  
Yaser Gholami ◽  
Romain Brossier ◽  
Stéphane Operto ◽  
Alessandra Ribodetti ◽  
Jean Virieux
Keyword(s):  
Seismic Data ◽  
Wave Speed ◽  
Waveform Inversion ◽  
Numerical Procedure ◽  
Full Waveform Inversion ◽  
Trade Off ◽  
Scattering Angle ◽  
Wave Speeds ◽  
Full Waveform ◽  
Transverse Isotropic

In most geologic environments, accounting for anisotropy is necessary to perform acoustic full waveform inversion (FWI) of wide-azimuth and wide-aperture seismic data because of the potential dependence of wave speeds on the direction of the wave propagation. In the framework of multiparameter FWI, the subsurface parameterization controls the influence of the different parameter classes on the modeled seismic data as a function of the scattering angle and hence the resolution with which the parameters can be reconstructed and the potential trade-off between different parameters. We have evaluated a numerical procedure based on computation of the scattering patterns of the different parameters to assess the sensitivity of the seismic data to different parameterizations of vertical transverse isotropic media in the acoustic approximation. Among the different categories we have tested, a monoparametric FWI was found for imaging one wave speed with a broad wavenumber content, keeping the Thomsen parameters fixed, which have a small influence on the data relative to the wave speed. This raises the question of the initial information required in the background models of the Thomsen parameters to perform reliable monoparameter FWI. Alternatively, simultaneously inverting the horizontal and vertical wave speeds introduces limited trade-off effects because these wave speeds have significant influence on the data for distinct ranges of scattering angles, while the influence of the Thomsen parameter [Formula: see text] remains weak. With such parameterization, the short-to-intermediate wavelengths of the vertical velocity are updated from the short-to-intermediate scattering angles, while the long-to-intermediate wavelengths of the horizontal velocity are updated from the wide-to-intermediate scattering angles. We concluded that the choice of the subsurface parameterization can be driven by the acquisition geometry, which controls the scattering-angle coverage and hence the resolving power of FWI, and by the accuracy of the available initial FWI models.

Constrained full-waveform inversion by model reparameterization

Geophysics ◽  
2012 ◽  
Vol 77 (2) ◽  
pp. R117-R127 ◽  
Author(s):  
Antoine Guitton ◽  
Gboyega Ayeni ◽  
Esteban Díaz
Keyword(s):  
Waveform Inversion ◽  
Model Space ◽  
Real Data ◽  
Velocity Model ◽  
Full Waveform Inversion ◽  
Coherent Noise ◽  
Low Frequencies ◽  
Full Waveform ◽  
Geological Information ◽  
Ill Posed

The waveform inversion problem is inherently ill-posed. Traditionally, regularization schemes are used to address this issue. For waveform inversion, where the model is expected to have many details reflecting the physical properties of the Earth, regularization and data fitting can work in opposite directions: the former smoothing and the latter adding details to the model. We propose constraining estimated velocity fields by reparameterizing the model. This technique, also called model-space preconditioning, is based on directional Laplacian filters: It preserves most of the details of the velocity model while smoothing the solution along known geological dips. Preconditioning also yields faster convergence at early iterations. The Laplacian filters have the property to smooth or kill local planar events according to a local dip field. By construction, these filters can be inverted and used in a preconditioned waveform inversion strategy to yield geologically meaningful models. We illustrate with 2D synthetic and field data examples how preconditioning with nonstationary directional Laplacian filters outperforms traditional waveform inversion when sparse data are inverted and when sharp velocity contrasts are present. Adding geological information with preconditioning could benefit full-waveform inversion of real data whenever irregular geometry, coherent noise and lack of low frequencies are present.

scholarly journals Full-Waveform Inversion for Imaging Faulted Structures: A Case Study from the Japan Trench Forearc Slope

2021 ◽  
Author(s):  
Ehsan Jamali Hondori ◽  
Chen Guo ◽  
Hitoshi Mikada ◽  
Jin-Oh Park
Keyword(s):  
Seismic Data ◽  
Initial Velocity ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Control Measures ◽  
Japan Trench ◽  
Full Waveform Inversion ◽  
Full Waveform ◽  
Time Migration ◽  
Shallow Sediments

AbstractFull-waveform inversion (FWI) of limited-offset marine seismic data is a challenging task due to the lack of refracted energy and diving waves from the shallow sediments, which are fundamentally required to update the long-wavelength background velocity model in a tomographic fashion. When these events are absent, a reliable initial velocity model is necessary to ensure that the observed and simulated waveforms kinematically fit within an error of less than half a wavelength to protect the FWI iterative local optimization scheme from cycle skipping. We use a migration-based velocity analysis (MVA) method, including a combination of the layer-stripping approach and iterations of Kirchhoff prestack depth migration (KPSDM), to build an accurate initial velocity model for the FWI application on 2D seismic data with a maximum offset of 5.8 km. The data are acquired in the Japan Trench subduction zone, and we focus on the area where the shallow sediments overlying a highly reflective basement on top of the Cretaceous erosional unconformity are severely faulted and deformed. Despite the limited offsets available in the seismic data, our carefully designed workflow for data preconditioning, initial model building, and waveform inversion provides a velocity model that could improve the depth images down to almost 3.5 km. We present several quality control measures to assess the reliability of the resulting FWI model, including ray path illuminations, sensitivity kernels, reverse time migration (RTM) images, and KPSDM common image gathers. A direct comparison between the FWI and MVA velocity profiles reveals a sharp boundary at the Cretaceous basement interface, a feature that could not be observed in the MVA velocity model. The normal faults caused by the basal erosion of the upper plate in the study area reach the seafloor with evident subsidence of the shallow strata, implying that the faults are active.

A new parameter set for anisotropic multiparameter full-waveform inversion and application to a North Sea data set

Geophysics ◽  
2016 ◽  
Vol 81 (4) ◽  
pp. U25-U38 ◽  
Author(s):  
Nuno V. da Silva ◽  
Andrew Ratcliffe ◽  
Vetle Vinje ◽  
Graham Conroy
Keyword(s):  
North Sea ◽  
Waveform Inversion ◽  
Real Data ◽  
Model Parameters ◽  
Full Waveform Inversion ◽  
Radiation Patterns ◽  
Data Set ◽  
Full Waveform ◽  
Seismic Image ◽  
Central North Sea

Parameterization lies at the center of anisotropic full-waveform inversion (FWI) with multiparameter updates. This is because FWI aims to update the long and short wavelengths of the perturbations. Thus, it is important that the parameterization accommodates this. Recently, there has been an intensive effort to determine the optimal parameterization, centering the fundamental discussion mainly on the analysis of radiation patterns for each one of these parameterizations, and aiming to determine which is best suited for multiparameter inversion. We have developed a new parameterization in the scope of FWI, based on the concept of kinematically equivalent media, as originally proposed in other areas of seismic data analysis. Our analysis is also based on radiation patterns, as well as the relation between the perturbation of this set of parameters and perturbation in traveltime. The radiation pattern reveals that this parameterization combines some of the characteristics of parameterizations with one velocity and two Thomsen’s parameters and parameterizations using two velocities and one Thomsen’s parameter. The study of perturbation of traveltime with perturbation of model parameters shows that the new parameterization is less ambiguous when relating these quantities in comparison with other more commonly used parameterizations. We have concluded that our new parameterization is well-suited for inverting diving waves, which are of paramount importance to carry out practical FWI successfully. We have demonstrated that the new parameterization produces good inversion results with synthetic and real data examples. In the latter case of the real data example from the Central North Sea, the inverted models show good agreement with the geologic structures, leading to an improvement of the seismic image and flatness of the common image gathers.

FULL-WAVEFORM INVERSION WITH SOURCE AND RECEIVER COUPLING EFFECTS CORRECTION

Geophysics ◽  
2021 ◽  
pp. 1-37
Author(s):  
Xinhai Hu ◽  
Wei Guoqi ◽  
Jianyong Song ◽  
Zhifang Yang ◽  
Minghui Lu ◽  
...  
Keyword(s):  
Waveform Inversion ◽  
Nonlinear Least Squares ◽  
Real Data ◽  
Model Parameters ◽  
Full Waveform Inversion ◽  
Linear Inversion ◽  
Near Surface ◽  
Model Parameter ◽  
Full Waveform ◽  
Coupling Factors

Coupling factors of sources and receivers vary dramatically due to the strong heterogeneity of near surface, which are as important as the model parameters for the inversion success. We propose a full waveform inversion (FWI) scheme that corrects for variable coupling factors while updating the model parameter. A linear inversion is embedded into the scheme to estimate the source and receiver factors and compute the amplitude weights according to the acquisition geometry. After the weights are introduced in the objective function, the inversion falls into the category of separable nonlinear least-squares problems. Hence, we could use the variable projection technique widely used in source estimation problem to invert the model parameter without the knowledge of source and receiver factors. The efficacy of the inversion scheme is demonstrated with two synthetic examples and one real data test.

Pre-Stack Full Waveform Inversion for Velocity Model Building

2011 ◽  
Author(s):  
S. Jerry Kapoor ◽  
Denes Vigh ◽  
Timothy John Bunting
Keyword(s):  
Model Building ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Full Waveform Inversion ◽  
Full Waveform ◽  
Velocity Model Building

Targeted stacking of weak seismic phases for improving mantle discontinuity imaging using full-waveform inversion

2021 ◽  
Author(s):  
Maria Koroni ◽  
Andreas Fichtner
Keyword(s):  
Seismic Waves ◽  
Waveform Inversion ◽  
Real Data ◽  
Full Waveform Inversion ◽  
Finite Frequency ◽  
Adjoint Methods ◽  
Frequency Sensitivity ◽  
Full Waveform ◽  
Discontinuity Structure ◽  
Mantle Discontinuity

<p>This study is a continuation of our efforts to connect adjoint methods and full-waveform inversion to common beamforming techniques, widely used and developed for signal enhancement. Our approach is focusing on seismic waves traveling in the Earth's mantle, which are phases commonly used to image internal boundaries, being however quite difficult to observe in real data. The main goal is to accentuate precursor waves arriving in well-known times before some major phase. These waves generate from interactions with global discontinuities in the mantle, thus being the most sensitive seismic phases and therefore most suitable for better understanding of discontinuity seismic structure. </p><p>Our work is based on spectral-element wave propagation which allows us to compute exact synthetic waveforms and adjoint methods for the calculation of sensitivity kernels. These tools are the core of full-waveform inversion and by our efforts we aim to incorporate more parts of the waveform in such inversion schemes. We have shown that targeted stacking of good quality waveforms arriving from various directions highlights the weak precursor waves. It additionally makes their traveltime finite frequency sensitivity prominent. This shows that we can benefit from using these techniques and exploit rather difficult parts of the seismogram.  It was also shown that wave interference is not easily avoided, but coherent phases arriving before the main phase also stack well and show on the sensitivity kernels. This does not hamper the evaluation of waveforms, as in a misfit measurement process one can exploit more phases on the body wave parts of seismograms.</p><p>In this study, we go a step forward and present recent developments of the approach relating to the effects of noise and a real data experiment. Realistic noise is added to synthetic waveforms in order to assess the methodology in a more pragmatic scenario. The addition of noise shows that stacking of coherent seismic phases is still possible and the sensitivity kernels of their traveltimes are not largely distorted, the precursor waves contribute sufficiently to their traveltime finite-frequency sensitivity kernels.<br>Using a well-located seismic array, we apply the method to real data and try to examine the possibilities of using non-ideal waveforms to perform imaging of the mantle discontinuity structure on the specific areas. In order to make the most out of the dense array configuration, we try subgroups of receivers for the targeted stacking and by moving along the array we aim at creating a cluster of stacks. The main idea is to use the subgroups as single receivers and create an evaluation of seismic discontinuity structure using information from each stack belonging to a subgroup. <br>Ideally, we aim at improving the tomographic images of discontinuities of selected regions by exploiting weaker seismic waves, which are nonetheless very informative.</p>

Full-waveform inversion for full-wavefield imaging: Decades in the making

2021 ◽  
Vol 40 (5) ◽  
pp. 324-334
Author(s):  
Rongxin Huang ◽  
Zhigang Zhang ◽  
Zedong Wu ◽  
Zhiyuan Wei ◽  
Jiawei Mei ◽  
...  
Keyword(s):  
Model Building ◽  
Seismic Imaging ◽  
Structural Information ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Data Sets ◽  
Full Waveform Inversion ◽  
Data Types ◽  
Velocity Models ◽  
Full Waveform

Seismic imaging using full-wavefield data that includes primary reflections, transmitted waves, and their multiples has been the holy grail for generations of geophysicists. To be able to use the full-wavefield data effectively requires a forward-modeling process to generate full-wavefield data, an inversion scheme to minimize the difference between modeled and recorded data, and, more importantly, an accurate velocity model to correctly propagate and collapse energy of different wave modes. All of these elements have been embedded in the framework of full-waveform inversion (FWI) since it was proposed three decades ago. However, for a long time, the application of FWI did not find its way into the domain of full-wavefield imaging, mostly owing to the lack of data sets with good constraints to ensure the convergence of inversion, the required compute power to handle large data sets and extend the inversion frequency to the bandwidth needed for imaging, and, most significantly, stable FWI algorithms that could work with different data types in different geologic settings. Recently, with the advancement of high-performance computing and progress in FWI algorithms at tackling issues such as cycle skipping and amplitude mismatch, FWI has found success using different data types in a variety of geologic settings, providing some of the most accurate velocity models for generating significantly improved migration images. Here, we take a step further to modify the FWI workflow to output the subsurface image or reflectivity directly, potentially eliminating the need to go through the time-consuming conventional seismic imaging process that involves preprocessing, velocity model building, and migration. Compared with a conventional migration image, the reflectivity image directly output from FWI often provides additional structural information with better illumination and higher signal-to-noise ratio naturally as a result of many iterations of least-squares fitting of the full-wavefield data.

Multi-parameter model building for the Qiuyue structure using four-component ocean-bottom seismometer data

Geophysics ◽  
2021 ◽  
pp. 1-52
Author(s):  
Yuzhu Liu ◽  
Xinquan Huang ◽  
Jizhong Yang ◽  
Xueyi Liu ◽  
Bin Li ◽  
...  
Keyword(s):  
Wave Velocity ◽  
Waveform Inversion ◽  
Velocity Model ◽  
P Wave ◽  
Velocity Analysis ◽  
Full Waveform Inversion ◽  
Ocean Bottom ◽  
Ocean Bottom Seismometer ◽  
Full Waveform ◽  
P Wave Velocity

Thin sand-mud-coal interbedded layers and multiples caused by shallow water pose great challenges to conventional 3D multi-channel seismic techniques used to detect the deeply buried reservoirs in the Qiuyue field. In 2017, a dense ocean-bottom seismometer (OBS) acquisition program acquired a four-component dataset in East China Sea. To delineate the deep reservoir structures in the Qiuyue field, we applied a full-waveform inversion (FWI) workflow to this dense four-component OBS dataset. After preprocessing, including receiver geometry correction, moveout correction, component rotation, and energy transformation from 3D to 2D, a preconditioned first-arrival traveltime tomography based on an improved scattering integral algorithm is applied to construct an initial P-wave velocity model. To eliminate the influence of the wavelet estimation process, a convolutional-wavefield-based objective function for the preprocessed hydrophone component is used during acoustic FWI. By inverting the waveforms associated with early arrivals, a relatively high-resolution underground P-wave velocity model is obtained, with updates at 2.0 km and 4.7 km depth. Initial S-wave velocity and density models are then constructed based on their prior relationships to the P-wave velocity, accompanied by a reciprocal source-independent elastic full-waveform inversion to refine both velocity models. Compared to a traditional workflow, guided by stacking velocity analysis or migration velocity analysis, and using only the pressure component or other single-component, the workflow presented in this study represents a good approach for inverting the four-component OBS dataset to characterize sub-seafloor velocity structures.

Sign in / Sign up

Export Citation Format

Share Document