Stereotomography of seismic data acquired on undulant topography

Geophysics ◽  
2018 ◽  
Vol 83 (4) ◽  
pp. U35-U41 ◽  
Author(s):  
Changkun Jin ◽  
Jianzhong Zhang
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Synthetic Data ◽  
Topographic Effects ◽  
Seismic Reflection Data ◽  
West China ◽  
Depth Migration ◽  
Velocity Models ◽  
Reflection Data ◽  
Rugged Topography

Stereotomography is a robust method for building velocity models from seismic reflection data, and it has been applied to offshore seismic data, but there is almost no stereotomographic study with rugged topographic conditions. We study the topographic effects on the slopes of locally coherent events of seismic data and develop an approach to calculate the slopes on an undulant observation surface using the horizontal and vertical components of slowness vectors estimated. Then, we develop an extended stereotomography with undulant observation surface based on the conventional one. Tests on synthetic data validate the extended stereotomography. Application to the field seismic data in a foothill belt in Xinjiang of the West China indicates that the extended stereotomography is an effective tool to build velocity models for prestack depth migration of seismic data acquired on rugged topography.

EXPLORATION HORIZONS FROM NEW SEISMIC CONCEPTS OF CDP AND DIGITAL PROCESSING

Geophysics ◽  
1967 ◽  
Vol 32 (2) ◽  
pp. 207-224 ◽  
Author(s):  
John D. Marr ◽  
Edward F. Zagst
Keyword(s):  
Data Processing ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Synthetic Data ◽  
Digital Processing ◽  
Seismic Data Processing ◽  
Multiple Reflections ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Recent Developments

The more recent developments in common‐depth‐point techniques to attenuate multiple reflections have resulted in an exploration capability comparable to the development of the seismic reflection method. The combination of new concepts in digital seismic data processing with CDP techniques is creating unforeseen exploration horizons with vastly improved seismic data. Major improvements in multiple reflection and reverberation attenuation are now attainable with appropriate CDP geometry and special CDP stacking procedures. Further major improvements are clearly evident in the very near future with the use of multichannel digital filtering‐stacking techniques and the application of deconvolution as the first step in seismic data processing. CDP techniques are briefly reviewed and evaluated with real and experimental data. Synthetic data are used to illustrate that all seismic reflection data should be deconvolved as the first processing step.

Automated stacking of seismic reflection data based on nonrigid image matching

Geophysics ◽  
2018 ◽  
Vol 83 (3) ◽  
pp. V171-V183 ◽  
Author(s):  
Sönke Reiche ◽  
Benjamin Berkels
Keyword(s):  
Image Matching ◽  
Seismic Reflection ◽  
Synthetic Data ◽  
Real Data ◽  
Seismic Line ◽  
Seismic Reflection Data ◽  
Velocity Models ◽  
Reflection Data ◽  
Seismic Image ◽  
Matching Techniques

Stacking of multichannel seismic reflection data is a crucial step in seismic data processing, usually leading to the first interpretable seismic image. Stacking is preceded by traveltime correction, in which all events contained in a common-midpoint (CMP) gather are corrected for their offset-dependent traveltime increase. Such corrections are often based on the assumption of hyperbolic traveltime curves, and a best fit hyperbola is usually sought for each reflection by careful determination of stacking velocities. However, assuming hyperbolic traveltime curves is not accurate in many situations, e.g., in the case of strongly curved reflectors, large offset-to-target-ratios, or strong anisotropy. Here, we found that an underlying model parameterizing the shape of the traveltime curve is not a strict necessity for producing high-quality stacks. Based on nonrigid image-matching techniques, we developed an alternative way of stacking, both independent of a reference velocity model and any prior assumptions regarding the shape of the traveltime curve. Mathematically, our stacking operator is based on a variational approach that transforms a series of seismic traces contained within a CMP gather into a common reference frame. Based on the normalized crosscorrelation and regularized by penalizing irregular displacements, time shifts are sought for each sample to minimize the discrepancy between a zero-offset trace and traces with larger offsets. Time shifts are subsequently exported as a data attribute and can easily be converted to stacking velocities. To demonstrate the feasibility of this approach, we apply it to simple and complex synthetic data and finally to a real seismic line. We find that our new method produces stacks of equal quality and velocity models of slightly better quality compared with an automated, hyperbolic traveltime correction and stacking approach for complex synthetic and real data cases.

scholarly journals Improved Interpretation of Deep Seismic Reflection Data in Areas of Complex Geology Through Integration With Passive Seismic Data Sets

2018 ◽  
Vol 123 (12) ◽  
pp. 10,810-10,830
Author(s):  
Michael Dentith ◽  
Huaiyu Yuan ◽  
Ruth Elaine Murdie ◽  
Perla Pina-Varas ◽  
Simon P. Johnson ◽  
...  
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Data Sets ◽  
Seismic Reflection Data ◽  
Deep Seismic Reflection ◽  
Reflection Data ◽  
Passive Seismic ◽  
Complex Geology

Depth migration and interpretation of the COCORP Wind River, Wyoming, seismic reflection data

Geology ◽  
1983 ◽  
Vol 11 (8) ◽  
pp. 462 ◽  
Author(s):  
Heloise Bloxsom Lynn ◽  
Spencer Quam ◽  
George A. Thompson
Keyword(s):  
Seismic Reflection ◽  
Seismic Reflection Data ◽  
Depth Migration ◽  
Reflection Data

Late Cretaceous – Cenozoic history of the transition zone between the East European Craton and the Paleozoic Platform, Polish sector of the Baltic Sea, revealed by new offshore regional seismic reflection data (BALTEC project)

2021 ◽  
Author(s):  
Piotr Krzywiec ◽  
Łukasz Słonka ◽  
Quang Nguyen ◽  
Michał Malinowski ◽  
Mateusz Kufrasa ◽  
...  
Keyword(s):  
High Resolution ◽  
Late Cretaceous ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Upper Cretaceous ◽  
Seismic Reflection Data ◽  
East European ◽  
Reflection Data ◽  
Multichannel Seismic Reflection ◽  
Multichannel Seismic Reflection Data

<p>In 2016, approximately 850 km of high-resolution multichannel seismic reflection data of the BALTEC survey have been acquired offshore Poland within the transition zone between the East European Craton and the Paleozoic Platform. Data processing, focused on removal of multiples, strongly overprinting geological information at shallower intervals, included SRME, TAU-P domain deconvolution, high resolution parabolic Radon demultiple and SWDM (Shallow Water De-Multiple). Entire dataset was Kirchhoff pre-stack time migrated. Additionally, legacy shallow high-resolution multichannel seismic reflection data acquired in this zone in 1997 was also used. All this data provided new information on various aspects of the Phanerozoic evolution of this area, including Late Cretaceous to Cenozoic tectonics and sedimentation. This phase of geological evolution could be until now hardly resolved by analysis of industry seismic data as, due to limited shallow seismic imaging and very strong overprint of multiples, essentially no information could have been retrieved from this data for first 200-300 m. Western part of the BALTEC dataset is located above the offshore segment of the Mid-Polish Swell (MPS) – large anticlinorium formed due to inversion of the axial part of the Polish Basin. BALTEC seismic data proved that Late Cretaceous inversion of the Koszalin – Chojnice fault zone located along the NE border of the MPS was thick-skinned in nature and was associated with substantial syn-inversion sedimentation. Subtle thickness variations and progressive unconformities imaged by BALTEC seismic data within the Upper Cretaceous succession in vicinity of the Kamień-Adler and the Trzebiatów fault zones located within the MPS documented complex interplay of Late Cretaceous basin inversion, erosion and re-deposition. Precambrian basement of the Eastern, cratonic part of the study area is overlain by Cambro-Silurian sedimentary cover. It is dissected by a system of steep, mostly reverse faults rooted in most cases in the deep basement. This fault system has been regarded so far as having been formed mostly in Paleozoic times, due to the Caledonian orogeny. As a consequence, Upper Cretaceous succession, locally present in this area, has been vaguely defined as a post-tectonic cover, locally onlapping uplifted Paleozoic blocks. New seismic data, because of its reliable imaging of the shallowest substratum, confirmed that at least some of these deeply-rooted faults were active as a reverse faults in latest Cretaceous – earliest Paleogene. Consequently, it can be unequivocally proved that large offshore blocks of Silurian and older rocks presently located directly beneath the Cenozoic veneer must have been at least partly covered by the Upper Cretaceous succession; then, they were uplifted during the widespread inversion that affected most of Europe. Ensuing regional erosion might have at least partly provided sediments that formed Upper Cretaceous progradational wedges recently imaged within the onshore Baltic Basin by high-end PolandSPAN regional seismic data. New seismic data imaged also Paleogene and younger post-inversion cover. All these results prove that Late Cretaceous tectonics substantially affected large areas located much farther towards the East than previously assumed.</p><p>This study was funded by the Polish National Science Centre (NCN) grant no UMO-2017/27/B/ST10/02316.</p>

A multioffset, three‐component VSP study in the Sudbury Basin

Geophysics ◽  
1995 ◽  
Vol 60 (2) ◽  
pp. 341-353 ◽  
Author(s):  
Xiao‐Gui Miao ◽  
Wooil M. Moon ◽  
B. Milkereit
Keyword(s):  
Data Processing ◽  
Seismic Reflection ◽  
Velocity Structure ◽  
Least Square ◽  
Seismic Reflection Data ◽  
S Waves ◽  
Velocity Models ◽  
Reflection Data ◽  
Wavefield Separation ◽  
Vsp Data

A multioffset, three‐component vertical seismic profiling (VSP) experiment was carried out in the Sudbury Basin, Ontario, as a part of the LITHOPROBE Sudbury Transect. The main objectives were determination of the shallow velocity structure in the middle of the Sudbury Basin, development of an effective VSP data processing flow, correlation of the VSP survey results with the surface seismic reflection data, and demonstration of the usefulness of the VSP method in a crystalline rock environment. The VSP data processing steps included rotation of the horizontal component data, traveltime inversion for velocity analysis, Radon transform for wavefield separation, and preliminary analysis of shear‐wave data. After wavefield separation, the flattened upgoing wavefields for both P‐waves and S‐waves display consistent reflection events from three depth levels. The VSP-CDP transformed section and corridor stacked section correlate well with the high‐resolution surface reflection data. In addition to obtaining realistic velocity models for both P‐ and S‐waves through least‐square inversion and synthetic seismic modeling for the Chelmsford area, the VSP experiment provided an independent estimation for the reflector dip using three component hodogram analysis, which indicates that the dip of the contact between the Chelmsford and Onwatin formations, at an approximate depth of 380 m in the Chelmsford borehole, is approximately 10.5° southeast. This study demonstrates that multioffset, three‐component VSP experiments can provide important constraints and auxiliary information for shallow crustal seismic studies in crystalline terrain. Thus, the VSP technique bridges the gap between the surface seismic‐reflection technique and well‐log surveys.

scholarly journals Monte Carlo reservoir analysis combining seismic reflection data and informed priors

Geophysics ◽  
2015 ◽  
Vol 80 (1) ◽  
pp. R31-R41 ◽  
Author(s):  
Andrea Zunino ◽  
Klaus Mosegaard ◽  
Katrine Lange ◽  
Yulia Melnikova ◽  
Thomas Mejer Hansen
Keyword(s):  
Monte Carlo ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Probabilistic Approach ◽  
Multiple Point ◽  
Petroleum Reservoir ◽  
Inversion Algorithm ◽  
Reservoir Properties ◽  
Seismic Reflection Data ◽  
Reflection Data

Determination of a petroleum reservoir structure and rock bulk properties relies extensively on inference from reflection seismology. However, classic deterministic methods to invert seismic data for reservoir properties suffer from some limitations, among which are the difficulty of handling complex, possibly nonlinear forward models, and the lack of robust uncertainty estimations. To overcome these limitations, we studied a methodology to invert seismic reflection data in the framework of the probabilistic approach to inverse problems, using a Markov chain Monte Carlo (McMC) algorithm with the goal to directly infer the rock facies and porosity of a target reservoir zone. We thus combined a rock-physics model with seismic data in a single inversion algorithm. For large data sets, the McMC method may become computationally impractical, so we relied on multiple-point-based a priori information to quantify geologically plausible models. We tested this methodology on a synthetic reservoir model. The solution of the inverse problem was then represented by a collection of facies and porosity reservoir models, which were samples of the posterior distribution. The final product included probability maps of the reservoir properties in obtained by performing statistical analysis on the collection of solutions.

Instantaneous spectral bandwidth and dominant frequency with applications to seismic reflection data

Geophysics ◽  
1993 ◽  
Vol 58 (3) ◽  
pp. 419-428 ◽  
Author(s):  
Arthur E. Barnes
Keyword(s):  
Instantaneous Frequency ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Power Spectra ◽  
Dominant Frequency ◽  
Center Frequency ◽  
Spectral Bandwidth ◽  
Instantaneous Amplitude ◽  
Seismic Reflection Data ◽  
Reflection Data

Fourier power spectra are often usefully characterized by average measures. In reflection seismology, the important average measures are center frequency, spectral bandwidth, and dominant frequency. These quantities have definitions familiar from probability theory: center frequency is the spectral mean, spectral bandwidth is the standard deviation about that mean, and dominant frequency is the square root of the second moment, which serves as an estimate of the zero‐crossing frequency. These measures suggest counterparts defined with instantaneous power spectra in place of Fourier power spectra, so that they are instantaneous in time though they represent averages in frequency. Intuitively reasonable requirements yield specific forms for these instantaneous quantities that can be computed with familiar complex seismic trace attributes. Instantaneous center frequency is just instantaneous frequency. Instantaneous bandwidth is the absolute value of the derivative of the instantaneous amplitude divided by the instantaneous amplitude. Instantaneous dominant frequency is the square root of the sum of the squares of the instantaneous frequency and instantaneous bandwidth. Instantaneous bandwidth and dominant frequency find employment as additional complex seismic trace attributes in the detailed study of seismic data. Instantaneous bandwidth is observed to be nearly always less than instantaneous frequency; the points where it is larger may mark the onset of distinct wavelets. These attributes, together with instantaneous frequency, are perhaps, of greater use in revealing the time‐varying spectral properties of seismic data. They can help in the search for low frequency shadows or in the analysis of frequency change due to effects of data processing. Instantaneous bandwidth and dominant frequency complement instantaneous frequency and should find wide application in the analysis of seismic reflection data.

Sign in / Sign up

Export Citation Format

Share Document