Parameterization analysis and field validation of VTI-elastic full-waveform inversion in a walk-away vertical seismic profile configuration

Geophysics ◽  
2020 ◽  
Vol 85 (3) ◽  
pp. B87-B107 ◽  
Author(s):  
Wenyong Pan ◽  
Kristopher A. Innanen ◽  
Yanfei Wang
Keyword(s):  
Wave Velocity ◽  
Waveform Inversion ◽  
Seismic Profile ◽  
P Wave ◽  
Full Waveform Inversion ◽  
Walk Away ◽  
S Wave ◽  
Full Waveform ◽  
Trade Offs ◽  
Vsp Data

Elastic full-waveform inversion (FWI) in transversely isotropic media with a vertical symmetry axis (VTI) is applied to field walk-away vertical seismic profile (W-VSP) data acquired in Western Canada. The performance of VTI-elastic FWI is significantly influenced by the model parameterization choice. Synthetic analysis based on specific field survey configuration is carried out to evaluate three different VTI-elastic model parameterizations. Interparameter trade-offs are quantified using the recently introduced interparameter contamination sensitivity kernel approach. Synthetic results suggest that neglecting anisotropy leads to inaccurate velocity estimations. For the conventional vertical velocity-Thomsen’s parameter parameterization (i.e., vertical P-wave velocity, vertical S-wave velocity, Thomsen’s parameters [Formula: see text] and [Formula: see text]), a sequential inversion strategy is designed to reduce strong natural interparameter trade-offs. The model parameterizations of elastic-constant ([Formula: see text], [Formula: see text], [Formula: see text], and [Formula: see text]) and velocity-based (vertical, horizontal, and normal move-out P-wave velocities and vertical S-wave velocity) models appear to suffer from fewer interparameter trade-offs, providing more reliable velocity and anisotropy models. Results derived from application of VTI-elastic FWI to the field W-VSP data set tend to support the synthetic conclusions. Multiparameter point spread functions are calculated to quantify the local interparameter trade-offs of the inverted models. The output inversion results are interpreted to provide valuable references regarding the target hydrocarbon reservoir.

Amplitude-based misfit functions in viscoelastic full-waveform inversion applied to walk-away vertical seismic profile data

Geophysics ◽  
2019 ◽  
Vol 84 (5) ◽  
pp. B335-B351 ◽  
Author(s):  
Wenyong Pan ◽  
Kristopher A. Innanen
Keyword(s):  
Amplitude Ratio ◽  
Waveform Inversion ◽  
Seismic Profile ◽  
P Wave ◽  
Western Canada ◽  
Full Waveform Inversion ◽  
Walk Away ◽  
Profile Data ◽  
S Wave ◽  
Full Waveform

Viscoelastic full-waveform inversion is applied to walk-away vertical seismic profile data acquired at a producing heavy-oil field in Western Canada for the determination of subsurface velocity models (P-wave velocity [Formula: see text] and S-wave velocity [Formula: see text]) and attenuation models (P-wave quality factor [Formula: see text] and S-wave quality factor [Formula: see text]). To mitigate strong velocity-attenuation trade-offs, a two-stage approach is adopted. In Stage I, [Formula: see text] and [Formula: see text] models are first inverted using a standard waveform-difference (WD) misfit function. Following this, in Stage II, different amplitude-based misfit functions are used to estimate the [Formula: see text] and [Formula: see text] models. Compared to the traditional WD misfit function, the amplitude-based misfit functions exhibit stronger sensitivity to attenuation anomalies and appear to be able to invert [Formula: see text] and [Formula: see text] models more reliably in the presence of velocity errors. Overall, the root-mean-square amplitude-ratio and spectral amplitude-ratio misfit functions outperform other misfit function choices. In the final outputs of our inversion, significant drops in the [Formula: see text] to [Formula: see text] ratio (~1.6) and Poisson’s ratio (~0.23) are apparent within the Clearwater Formation (depth ~0.45–0.50 km) of the Mannville Group in the Western Canada Sedimentary Basin. Strong [Formula: see text] (~20) and [Formula: see text] (~15) anomalies are also evident in this zone. These observations provide information to help identify the target attenuative reservoir saturated with heavy-oil resources.

scholarly journals Interparameter trade-off quantification for isotropic-elastic full-waveform inversion with various model parameterizations

Geophysics ◽  
2019 ◽  
Vol 84 (2) ◽  
pp. R185-R206 ◽  
Author(s):  
Wenyong Pan ◽  
Kristopher A. Innanen ◽  
Yu Geng ◽  
Junxiao Li
Keyword(s):  
Wave Velocity ◽  
Waveform Inversion ◽  
P Wave ◽  
Physical Parameters ◽  
Full Waveform Inversion ◽  
S Wave ◽  
Trade Off ◽  
Full Waveform ◽  
Trade Offs ◽  
P Wave Velocity

Simultaneous determination of multiple physical parameters using full-waveform inversion (FWI) suffers from interparameter trade-off difficulties. Analyzing the interparameter trade-offs in different model parameterizations of isotropic-elastic FWI, and thus determining the appropriate model parameterization, are critical for efficient inversion and obtaining reliable inverted models. Five different model parameterizations are considered and compared including velocity-density, modulus-density, impedance-density, and two velocity-impedance parameterizations. The scattering radiation patterns are first used for interparameter trade-off analysis. Furthermore, a new framework is developed to evaluate the interparameter trade-off based upon multiparameter Hessian-vector products: Multiparameter point spread functions (MPSFs) and interparameter contamination sensitivity kernels (ICSKs), which provide quantitative, second-order measurements of the interparameter contaminations. In the numerical experiments, the interparameter trade-offs in various model parameterizations are evaluated using the MPSFs and ICSKs. Inversion experiments are carried out with simple Gaussian-anomaly models and a complex Marmousi model. Overall, the parameterization of the P-wave velocity, S-wave velocity, and density, and the parameterization of the P-wave velocity, S-wave velocity, and S-wave impedance perform best for reconstructing all of the physical parameters. Isotropic-elastic FWI of the Hussar low-frequency data set with various model parameterizations verifies our conclusions.

2D frequency-domain elastic full-waveform inversion using the block-diagonal pseudo-Hessian approximation

Geophysics ◽  
2016 ◽  
Vol 81 (5) ◽  
pp. R247-R259 ◽  
Author(s):  
Yuwei Wang ◽  
Liangguo Dong ◽  
Yuzhu Liu ◽  
Jizhong Yang
Keyword(s):  
Frequency Domain ◽  
Wave Velocity ◽  
Hessian Matrix ◽  
Waveform Inversion ◽  
Full Waveform Inversion ◽  
S Wave ◽  
Trade Off ◽  
Full Waveform ◽  
Trade Offs ◽  
Block Diagonal

Elastic full-waveform inversion (EFWI) of multicomponent seismic data is a powerful tool for estimating the subsurface elastic parameters with high accuracy. However, the trade-offs between multiple parameters increase the nonlinearity of EFWI. Although the conventional diagonal-approximate Hessian matrix describes the illumination and limited bandwidth effects, it ignores the trade-off effects and decreases the convergence rate of EFWI. We have developed a block-diagonal pseudo-Hessian operator for 2D frequency-domain EFWI to take into account the approximate trade-offs among the P-wave (compressional-wave) velocity, S-wave (shear-wave) velocity, and density without extra computational costs on forward simulations. The Hessian matrix tends toward a block-diagonal matrix as the frequency grows to infinity; thus, the proposed block-diagonal pseudo-Hessian matrix is more accurate at higher frequencies. The inverse of the block-diagonal pseudo-Hessian matrix is used as a preconditioner for the nonlinear conjugate-gradient method to simultaneously reconstruct P- and S-wave velocities and density. This approach effectively mitigates the crosstalk artifacts by correcting the gradients from the trade-off effects and produces more rapid inversion convergence, which becomes more significant at higher frequencies. Synthetic experiments on an inclusion model and the elastic Marmousi2 model demonstrate its feasibility and validity in EFWI.

Elastic full waveform inversion of multicomponent ocean-bottom cable seismic data: Application to Alba Field, U. K. North Sea

Geophysics ◽  
2010 ◽  
Vol 75 (6) ◽  
pp. R109-R119 ◽  
Author(s):  
Timothy J. Sears ◽  
Penny J. Barton ◽  
Satish C. Singh
Keyword(s):  
Wave Velocity ◽  
Seismic Data ◽  
Waveform Inversion ◽  
P Wave ◽  
Full Waveform Inversion ◽  
Ocean Bottom ◽  
S Wave ◽  
Wave Data ◽  
Data Inversion ◽  
Full Waveform

Elastic full waveform inversion of multichannel seismic data represents a data-driven form of analysis leading to direct quantification of the subsurface elastic parameters in the depth domain. Previous studies have focused on marine streamer data using acoustic or elastic inversion schemes for the inversion of P-wave data. In this paper, P- and S-wave velocities are inverted for using wide-angle multicomponent ocean-bottom cable (OBC) seismic data. Inversion is undertaken using a two-dimensional elastic algorithm operating in the time domain, which allows accurate modeling and inversion of the full elastic wavefield, including P- and mode-converted PS-waves and their respective amplitude variation with offset (AVO) responses. Results are presented from the application of this technique to an OBC seismic data set from the Alba Field, North Sea. After building an initial velocity model and extracting a seismic wavelet, the data are inverted instages. In the first stage, the intermediate wavelength P-wave velocity structure is recovered from the wide-angle data and then the short-scale detail from near-offset data using P-wave data on the [Formula: see text] (vertical geophone) component. In the second stage, intermediate wavelengths of S-wave velocity are inverted for, which exploits the information captured in the P-wave’s elastic AVO response. In the third stage, the earlier models are built on to invert mode-converted PS-wave events on the [Formula: see text] (horizontal geophone) component for S-wave velocity, targeting first shallow and then deeper structure. Inversion of [Formula: see text] alone has been able to delineate the Alba Field in P- and S-wave velocity, with the main field and outlier sands visible on the 2D results. Inversion of PS-wave data has demonstrated the potential of using converted waves to resolve shorter wavelength detail. Even at the low frequencies [Formula: see text] inverted here, improved spatial resolution was obtained by inverting S-wave data compared with P-wave data inversion results.

Joint petrophysical full-waveform inversion of the shallow-seismic and multi-offset GPR data

2021 ◽  
Author(s):  
Tan Qin ◽  
Thomas Bohlen ◽  
Yudi Pan
Keyword(s):  
Dielectric Permittivity ◽  
Wave Velocity ◽  
Waveform Inversion ◽  
P Wave ◽  
Relative Dielectric Permittivity ◽  
Full Waveform Inversion ◽  
S Wave ◽  
Petrophysical Parameters ◽  
Full Waveform ◽  
Shallow Seismic

<p>Shallow-seismic surface wave and ground penetrating radar (GPR) are employed in a wide range of engineering and geosciences applications. Full-waveform inversion (FWI) of either seismic or multi-offset GPR data are able to provide high-resolution subsurface characterization and have received particular attention in the past decade. Those two geophysical methods are involved in the increasing requirements of comprehensive site and material investigations. However, it is still challenging to provide an effective integration between seismic data and electromagnetic data. In this paper, we investigated the joint petrophysical inversion (JPI) of shallow-seismic and multi-offset GPR data for more consistent imaging of near surface. As a bridge between the seismic parameters (P-wave velocity, S-wave velocity, and density) and GPR parameters (relative dielectric permittivity and electric conductivity), the petrophysical relationships with the parameters namely porosity and saturation are employed to link two data sets. We first did a sensitivity analysis of the petrophysical parameters to the seismic and GPR parameters and then determined an efficient integration of using shallow-seismic FWI to update porosity and GPR FWI to update saturation, respectively. A comparison of several parameterisation combinations shows that the seismic velocity parameterisation in shallow-seismic FWI and a modified logarithm parameterisation in GPR FWI works well in reconstructing reliable S-wave velocity and relative dielectric permittivity models, respectively. With the help from the petrophysical links, we realized JPI by transforming those well recovered parameters to the petrophysical parameters and then to other seismic and GPR parameters. A synthetic test indicates that, compared with the individual petrophysical inversion and individual FWI, JPI outperforms in simultaneously reconstructing all seismic, GPR, and petrophysical parameters with higher resolution and improved details. It is proved that JPI would be a potential data integration approach for the shallow subsurface investigation.</p>

A hierarchical elastic full-waveform inversion scheme based on wavefield separation and the multistep-length approach

Geophysics ◽  
2016 ◽  
Vol 81 (3) ◽  
pp. R99-R123 ◽  
Author(s):  
Zhiming Ren ◽  
Yang Liu
Keyword(s):  
Wave Velocity ◽  
Waveform Inversion ◽  
P Wave ◽  
Model Parameters ◽  
Full Waveform Inversion ◽  
S Wave ◽  
Wave Velocities ◽  
Full Waveform ◽  
Wavefield Separation ◽  
P Wave Velocity

Elastic full-waveform inversion (FWI) updates model parameters by minimizing the residuals of the P- and S-wavefields, resulting in more local minima and serious nonlinearity. In addition, the coupling of different parameters degrades the inversion results. To address these problems, we have developed a hierarchical elastic FWI scheme based on wavefield separation and a multistep-length gradient approach. First, we have derived the gradients expressed by different wave modes; analyzed the crosstalk between various parameters; and evaluated the sensitivity of separated P-wave, separated S-wave, and P- and S-wave misfit functions. Then, a practical four-stage inversion workflow was developed. In the first stage, conventional FWI is used to achieve rough estimates of the P- and S-wave velocities. In the second stage, we only invert the P-wave velocity applying the separated P-wavefields when strong S-wave energy is involved, or we merely update the S-wave velocity by matching the separated S-wavefields for the weak S-wave case. The PP and PS gradient formulas are used in these two cases, respectively. Therefore, the nonlinearity of inversion and the crosstalk between parameters are greatly reduced. In the third stage, the multistep-length gradient scheme is adopted. The density structure can be improved owing to the use of individual step lengths for different parameters. In the fourth stage, we make minor adjustments to the recovered P- and S-wave velocities and density by implementing conventional FWI again. Synthetic examples have determined that our hierarchical FWI scheme with the aforementioned steps obtains more plausible models than the conventional method. Inversion results of each stage and any three stages reveal that wavefield decomposition and the multistep-length approach are helpful to improve the accuracy of velocities and density, respectively, and all the stages of our hierarchical FWI method are necessary to give a good recovery of P- and S-wave velocities and density.

scholarly journals Reflection Full Waveform Inversion with Decoupled Elastic-wave Equations in Inhomogeneous Medium

2021 ◽  
Vol 64 (1) ◽  
Author(s):  
Zhanyuan Liang ◽  
Guochen Wu ◽  
Xiaoyu Zhang ◽  
Qingyang Li
Keyword(s):  
Elastic Wave ◽  
Inhomogeneous Medium ◽  
Wave Velocity ◽  
Wave Equations ◽  
Waveform Inversion ◽  
P Wave ◽  
Full Waveform Inversion ◽  
S Wave ◽  
Full Waveform ◽  
Elastic Wave Equations

Reflection full-waveform inversion (RFWI) can reduce the nonlinearity of inversion providing an accurate initial velocity model for full-waveform inversion (FWI) through the tomographic components (low-wavenumber). However, elastic-wave reflection full-waveform inversion (ERFWI) is more vulnerable to the problem of local minimum due to the complicated multi-component wavefield. Our algorithm first divides kernels of ERFWI into four subkernels based on the theory of decoupled elastic-wave equations. Then we try to construct the tomographic components of ERFWI with only single-component wavefields, similarly to acoustic inversions. However, the S-wave velocity is still vulnerable to the coupling effects because of P-wave components contained in the S-wavefield in an inhomogeneous medium. Therefore we develop a method for decoupling elastic- wave equations in an inhomogeneous medium, which is applied to the decomposition of kernels in ERFWI. The new decoupled system can improve the accuracy of S-wavefield and hence further reduces the high-wavenumber crosstalk in the subkernel of S-wave velocity after kernels are decomposed. The numerical examples of Sigsbee2A model demonstrate that our ERFWI method with decoupled elastic-wave equations can efficiently recover the low-wavenumber components of the model and improve the precision of the S-wave velocity.

Multi-parameter model building for the Qiuyue structure using four-component ocean-bottom seismometer data

Geophysics ◽  
2021 ◽  
pp. 1-52
Author(s):  
Yuzhu Liu ◽  
Xinquan Huang ◽  
Jizhong Yang ◽  
Xueyi Liu ◽  
Bin Li ◽  
...  
Keyword(s):  
Wave Velocity ◽  
Waveform Inversion ◽  
Velocity Model ◽  
P Wave ◽  
Velocity Analysis ◽  
Full Waveform Inversion ◽  
Ocean Bottom ◽  
Ocean Bottom Seismometer ◽  
Full Waveform ◽  
P Wave Velocity

Thin sand-mud-coal interbedded layers and multiples caused by shallow water pose great challenges to conventional 3D multi-channel seismic techniques used to detect the deeply buried reservoirs in the Qiuyue field. In 2017, a dense ocean-bottom seismometer (OBS) acquisition program acquired a four-component dataset in East China Sea. To delineate the deep reservoir structures in the Qiuyue field, we applied a full-waveform inversion (FWI) workflow to this dense four-component OBS dataset. After preprocessing, including receiver geometry correction, moveout correction, component rotation, and energy transformation from 3D to 2D, a preconditioned first-arrival traveltime tomography based on an improved scattering integral algorithm is applied to construct an initial P-wave velocity model. To eliminate the influence of the wavelet estimation process, a convolutional-wavefield-based objective function for the preprocessed hydrophone component is used during acoustic FWI. By inverting the waveforms associated with early arrivals, a relatively high-resolution underground P-wave velocity model is obtained, with updates at 2.0 km and 4.7 km depth. Initial S-wave velocity and density models are then constructed based on their prior relationships to the P-wave velocity, accompanied by a reciprocal source-independent elastic full-waveform inversion to refine both velocity models. Compared to a traditional workflow, guided by stacking velocity analysis or migration velocity analysis, and using only the pressure component or other single-component, the workflow presented in this study represents a good approach for inverting the four-component OBS dataset to characterize sub-seafloor velocity structures.

scholarly journals Time–frequency windowing in multiparameter elastic FWI of shallow seismic wavefield

2020 ◽  
Vol 222 (2) ◽  
pp. 1164-1177
Author(s):  
Nikolaos Athanasopoulos ◽  
Edgar Manukyan ◽  
Thomas Bohlen ◽  
Hansruedi Maurer
Keyword(s):  
Wave Velocity ◽  
Time Window ◽  
Mass Density ◽  
Waveform Inversion ◽  
P Wave ◽  
S Wave ◽  
Time Frequency ◽  
Full Waveform ◽  
Shallow Seismic ◽  
P Wave Velocity

SUMMARY Full-waveform inversion of shallow seismic wavefields is a promising method to infer multiparameter models of elastic material properties (S-wave velocity, P-wave velocity and mass density) of the shallow subsurface with high resolution. Previous studies used either the refracted Pwaves to reconstructed models of P-wave velocity or the high-amplitude Rayleigh waves to infer the S-wave velocity structure. In this work, we propose a combination of both wavefields using continuous time–frequency windowing. We start with the contribution of refracted P waves and gradually increase the time window to account for scattered body waves, higher mode Rayleigh waves and finally the fundamental Rayleigh wave mode. The opening of the time window is combined with opening the frequency bandwidth of input signals to avoid cycle skipping. Synthetic reconstruction tests revealed that the reconstruction of P-wave velocity model and mass density can be improved. The S-wave velocity reconstruction is still accurate and robust and is slightly benefitted by time–frequency windowing. In a field data application, we observed that time–frequency windowing improves the consistency of multiparameter models. The inferred models are in good agreement with independent geophysical information obtained from ground-penetrating radar and full-waveform inversion of SH waves.

scholarly journals Semiglobal viscoacoustic full-waveform inversion

Geophysics ◽  
2019 ◽  
Vol 84 (2) ◽  
pp. R271-R293 ◽  
Author(s):  
Nuno V. da Silva ◽  
Gang Yao ◽  
Michael Warner
Keyword(s):  
Physical Properties ◽  
Wave Velocity ◽  
Seismic Data ◽  
Waveform Inversion ◽  
P Wave ◽  
Full Waveform Inversion ◽  
Data Set ◽  
Intrinsic Attenuation ◽  
Full Waveform ◽  
P Wave Velocity

Full-waveform inversion deals with estimating physical properties of the earth’s subsurface by matching simulated to recorded seismic data. Intrinsic attenuation in the medium leads to the dispersion of propagating waves and the absorption of energy — media with this type of rheology are not perfectly elastic. Accounting for that effect is necessary to simulate wave propagation in realistic geologic media, leading to the need to estimate intrinsic attenuation from the seismic data. That increases the complexity of the constitutive laws leading to additional issues related to the ill-posed nature of the inverse problem. In particular, the joint estimation of several physical properties increases the null space of the parameter space, leading to a larger domain of ambiguity and increasing the number of different models that can equally well explain the data. We have evaluated a method for the joint inversion of velocity and intrinsic attenuation using semiglobal inversion; this combines quantum particle-swarm optimization for the estimation of the intrinsic attenuation with nested gradient-descent iterations for the estimation of the P-wave velocity. This approach takes advantage of the fact that some physical properties, and in particular the intrinsic attenuation, can be represented using a reduced basis, substantially decreasing the dimension of the search space. We determine the feasibility of the method and its robustness to ambiguity with 2D synthetic examples. The 3D inversion of a field data set for a geologic medium with transversely isotropic anisotropy in velocity indicates the feasibility of the method for inverting large-scale real seismic data and improving the data fitting. The principal benefits of the semiglobal multiparameter inversion are the recovery of the intrinsic attenuation from the data and the recovery of the true undispersed infinite-frequency P-wave velocity, while mitigating ambiguity between the estimated parameters.

Sign in / Sign up

Export Citation Format

Share Document