Two effective inverse Laplace transform algorithms for computing time-domain electromagnetic responses

Author(s):  
Jianhui Li ◽  
Colin G. Farquharson
Geophysics ◽  
2016 ◽  
Vol 81 (2) ◽  
pp. E113-E128 ◽  
Author(s):  
Jianhui Li ◽  
Colin G. Farquharson ◽  
Xiangyun Hu

The inverse Laplace transform is one of the methods used to obtain time-domain electromagnetic (EM) responses in geophysics. The Gaver-Stehfest algorithm has so far been the most popular technique to compute the Laplace transform in the context of transient electromagnetics. However, the accuracy of the Gaver-Stehfest algorithm, even when using double-precision arithmetic, is relatively low at late times due to round-off errors. To overcome this issue, we have applied variable-precision arithmetic in the MATLAB computing environment to an implementation of the Gaver-Stehfest algorithm. This approach has proved to be effective in terms of improving accuracy, but it is computationally expensive. In addition, the Gaver-Stehfest algorithm is significantly problem dependent. Therefore, we have turned our attention to two other algorithms for computing inverse Laplace transforms, namely, the Euler and Talbot algorithms. Using as examples the responses for central-loop, fixed-loop, and horizontal electric dipole sources for homogeneous and layered mediums, these two algorithms, implemented using normal double-precision arithmetic, have been shown to provide more accurate results and to be less problem dependent than the standard Gaver-Stehfest algorithm. Furthermore, they have the capacity for yielding more accurate time-domain responses than the cosine and sine transforms for which the frequency-domain responses are obtained by interpolation between a limited number of explicitly computed frequency-domain responses. In addition, the Euler and Talbot algorithms have the potential of requiring fewer Laplace- or frequency-domain function evaluations than do the other transform methods commonly used to compute time-domain EM responses, and thus of providing a more efficient option.


2019 ◽  
Vol 141 (12) ◽  
Author(s):  
Nantu Sarkar ◽  
Sudip Mondal

Abstract Following the link of work of He and Cao (2009, Math. Comput. Modell., 49(7–8), 1719–1720), we employ the theory of generalized thermoelasticity with dual-phase-lag (DPL) to study the transient phenomena in a thin slim strip due to a moving heat source. Both ends of the strip are assumed to be fixed and thermally insulated. Using Laplace transform as a tool, the problem has been transformed into the space-domain and solved analytically. Finally, solutions in the real-time domain are obtained by applying the inverse Laplace transform. Numerical calculation for stress, displacement, and temperature within the strip are carried out and presented graphically. The effect of moving heat source speed on temperature, stress, and displacement is studied. The temperature, displacement, and stress in the strip are found to be decreasing at large source speed.


2011 ◽  
Vol 243-249 ◽  
pp. 4488-4495 ◽  
Author(s):  
Ke Yang

The paper has obtained a unified final solution for the waterhammer equations. The proposed solution, covering all kinds of initial conditions and boundary conditions, has been proved to be written in the form of the d'Alembert's wave functions. The periodical influence of the initial conditions on the results is discussed. The proposed solution, with two kinds of algebraic equations containing only finite terms, is suitable for numerical calculation, convenient for programming and liable to dealing with complex pipe systems. An example has been given to show the use of the method. The skill to perform the inverse Laplace transform in obtaining the solution is different from the traditional ones and can be extended to use in many other problems including the FSI waterhammer problem.


2014 ◽  
Vol 989-994 ◽  
pp. 1825-1828
Author(s):  
Wei Zhang

Using the Laplace transform and freezing time variable, the problem in the time domain into the frequency domain to solve the problem. The establishment of a crack unit model in the frequency domain, and the boundary integral equation and discrete form containing the crack unit has been deduced. While using Durbin algorithm suitable for transient dynamic response of the inverse Laplace transform, the amount of stress intensity factor of a set of transformation parameters corresponding to the frequency domain into a time domain to obtain the dynamic stress intensity factor of time curve, and calculate the stress intensity factor compared to the boundary finite element method has a Laplace transform high precision, easy to save CPU time and data preparation features, we recommend using this method to calculate the dynamic stress intensity factor.


2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Dongxu He ◽  
Xinle Zang ◽  
Lei Ge

The effect of gyro constant drift and initial azimuth error on the convergence time of compass azimuth is analyzed in this article. Using our designed compass azimuth alignment system, we obtain the responses of gyro constant drift and initial azimuth error in the frequency domain. The corresponding response function in the time domain is derived using the inverse Laplace transform, and its convergence time is then analyzed. The analysis results demonstrate that the convergence time of compass azimuth alignment is related to the second-order damping oscillation period, the gyro constant drift, and the initial azimuth error. In this study, the error band is set to 0.01° to determine convergence. When the gyro drift is less than 0.05°/h, compass azimuth alignment can converge within 0.9 damping oscillation periods. When the initial azimuth error is less than 5°, compass azimuth alignment can converge within 1.4 damping oscillation periods. When both conditions are met, the initial error plays a major role in convergence, while gyro drift has a smaller effect on convergence time. Finally, the validity of our method is verified using simulations.


Sign in / Sign up

Export Citation Format

Share Document