Residual statics application for high-density, low signal-to-noise ratio land data

2020 ◽  
Author(s):  
Xukai Shen ◽  
Elizabeth L’Heureux
Keyword(s):  
Signal To Noise Ratio ◽  
High Density ◽  
Signal To Noise ◽  
Noise Ratio

A Comparison of 25 Gbps NRZ & PAM-4 Modulation Used in Reference, Legacy, & Premium Backplane Channels

2012 ◽  
Vol 2012 (1) ◽  
pp. 000283-000294 ◽  
Author(s):  
Chad Morgan ◽  
Adam Healey
Keyword(s):  
Insertion Loss ◽  
Signal To Noise Ratio ◽  
High Density ◽  
Advanced Materials ◽  
Signal To Noise ◽  
Baud Rate ◽  
Noise Ratio ◽  
Better Than

Standards bodies are now examining how to increase the throughput of high-density backplane links to 25 Gbps. One method for achieving this is to construct premium backplane links utilizing advanced materials and connectors. Another approach is to re-use legacy backplanes by employing PAM-4 signaling at half of the baud rate. For PAM-4 to offer an advantage over NRZ, the signal-to-noise ratio (SNR) at the slicer input, i.e. after equalization, must be ∼9.5 dB better than NRZ to overcome loss of separation between signal levels. This paper will examine 25 Gbaud NRZ and 12.5 Gbaud PAM-4 signaling across varying levels of channel insertion loss and crosstalk. The paper provides a reliable reference for engineers to use when considering when it is appropriate to use NRZ signaling at 25 Gbaud and when it is appropriate to use PAM-4 signaling at 12.5 Gbaud for successful high-density backplane operation.

Signal-to-noise ratio models for high-density recording

1986 ◽  
Vol 22 (5) ◽  
pp. 898-900
Author(s):  
B. Finkelstein ◽  
E. Christensen
Keyword(s):  
Signal To Noise Ratio ◽  
High Density ◽  
Signal To Noise ◽  
High Density Recording ◽  
Noise Ratio

Fast Timing Acquisition for Low Signal-to-Noise Ratio High Density Optical Recording

2002 ◽  
Vol 41 (Part 1, No. 3B) ◽  
pp. 1772-1776 ◽  
Author(s):  
Jingfeng Liu ◽  
Hongwei Song ◽  
B. V. K. Vijaya Kumar
Keyword(s):  
Signal To Noise Ratio ◽  
Optical Recording ◽  
High Density ◽  
Signal To Noise ◽  
Timing Acquisition ◽  
Fast Timing ◽  
Noise Ratio

Determination of the Best Emulsion for the Microscopy of Crystals

1981 ◽  
Vol 39 ◽  
pp. 32-33
Author(s):  
David A. Grano ◽  
Kenneth H. Downing
Keyword(s):  
Spatial Frequency ◽  
Information Transfer ◽  
Signal To Noise Ratio ◽  
Experimental Situation ◽  
Photographic Emulsion ◽  
Modulation Transfer ◽  
Signal To Noise ◽  
Frequency Space ◽  
Noise Ratio

The retrieval of high-resolution information from images of biological crystals depends, in part, on the use of the correct photographic emulsion. We have been investigating the information transfer properties of twelve emulsions with a view toward 1) characterizing the emulsions by a few, measurable quantities, and 2) identifying the “best” emulsion of those we have studied for use in any given experimental situation. Because our interests lie in the examination of crystalline specimens, we've chosen to evaluate an emulsion's signal-to-noise ratio (SNR) as a function of spatial frequency and use this as our critereon for determining the best emulsion.The signal-to-noise ratio in frequency space depends on several factors. First, the signal depends on the speed of the emulsion and its modulation transfer function (MTF). By procedures outlined in, MTF's have been found for all the emulsions tested and can be fit by an analytic expression 1/(1+(S/S0)2). Figure 1 shows the experimental data and fitted curve for an emulsion with a better than average MTF. A single parameter, the spatial frequency at which the transfer falls to 50% (S0), characterizes this curve.

Experiments in Bright-Field Imaging with Hollow-Cone Illumination

1981 ◽  
Vol 39 ◽  
pp. 226-227
Author(s):  
W. Kunath ◽  
K. Weiss ◽  
E. Zeitler
Keyword(s):  
Signal To Noise Ratio ◽  
Carbon Support ◽  
Electronic System ◽  
Optic Axis ◽  
Hollow Cone ◽  
Signal To Noise ◽  
Bright Field ◽  
Noise Ratio ◽  
Single Field ◽  
Field Imaging

Bright-field images taken with axial illumination show spurious high contrast patterns which obscure details smaller than 15 ° Hollow-cone illumination (HCI), however, reduces this disturbing granulation by statistical superposition and thus improves the signal-to-noise ratio. In this presentation we report on experiments aimed at selecting the proper amount of tilt and defocus for improvement of the signal-to-noise ratio by means of direct observation of the electron images on a TV monitor.Hollow-cone illumination is implemented in our microscope (single field condenser objective, Cs = .5 mm) by an electronic system which rotates the tilted beam about the optic axis. At low rates of revolution (one turn per second or so) a circular motion of the usual granulation in the image of a carbon support film can be observed on the TV monitor. The size of the granular structures and the radius of their orbits depend on both the conical tilt and defocus.

Information capacity and bandwidth limitations in the SEM

1989 ◽  
Vol 47 ◽  
pp. 84-85
Author(s):  
D. C. Joy ◽  
R. D. Bunn
Keyword(s):  
Signal To Noise Ratio ◽  
Critical Dimension ◽  
Information Capacity ◽  
Acquisition Time ◽  
Signal To Noise ◽  
Sem Image ◽  
Probe Size ◽  
Minimum Number ◽  
Noise Ratio ◽  
Signal Channel

The information available from an SEM image is limited both by the inherent signal to noise ratio that characterizes the image and as a result of the transformations that it may undergo as it is passed through the amplifying circuits of the instrument. In applications such as Critical Dimension Metrology it is necessary to be able to quantify these limitations in order to be able to assess the likely precision of any measurement made with the microscope.The information capacity of an SEM signal, defined as the minimum number of bits needed to encode the output signal, depends on the signal to noise ratio of the image - which in turn depends on the probe size and source brightness and acquisition time per pixel - and on the efficiency of the specimen in producing the signal that is being observed. A detailed analysis of the secondary electron case shows that the information capacity C (bits/pixel) of the SEM signal channel could be written as :

Speech Reception in the Presence of Classroom Noise

1979 ◽  
Vol 10 (4) ◽  
pp. 221-230 ◽  
Author(s):  
Veronica Smyth
Keyword(s):  
Signal To Noise Ratio ◽  
Learning Processes ◽  
Speech Discrimination ◽  
Signal To Noise ◽  
Speech Reception ◽  
Monosyllabic Words ◽  
Noise Ratio

Three hundred children from five to 12 years of age were required to discriminate simple, familiar, monosyllabic words under two conditions: 1) quiet, and 2) in the presence of background classroom noise. Of the sample, 45.3% made errors in speech discrimination in the presence of background classroom noise. The effect was most marked in children younger than seven years six months. The results are discussed considering the signal-to-noise ratio and the possible effects of unwanted classroom noise on learning processes.

Sign in / Sign up

Export Citation Format

Share Document