Examination of the S-wave velocity structures by the autocorrelation function using the strong motion records in the Ishikari Plain

2021 ◽  
Author(s):  
Naofumi Nakagawa ◽  
Nobuo Takai ◽  
Michiko Shigefuji
2020 ◽  
Vol 110 (6) ◽  
pp. 2882-2891
Author(s):  
Kosuke Chimoto ◽  
Hiroaki Yamanaka

ABSTRACT The autocorrelation of ambient noise is used to capture reflected waves for crustal and sedimentary structures. We applied autocorrelation to strong-motion records to capture the reflected waves from sedimentary layers and used them for tuning the S-wave velocity structure of these layers. Because a sedimentary-layered structure is complicated and generates many reflected waves, it is important to identify the boundary layer from which the waves reflected. We used spectral whitening during autocorrelation analysis to capture the reflected waves from the seismic bedrock with an appropriate smoothing band, which controls the wave arrival from the desired layer boundary. The effect of whitening was confirmed by the undulation frequency observed in the transfer function of the sedimentary layers. After careful determination of parameters for spectral whitening, we applied data processing to the strong-motion records observed at the stations in the Shimousa region of the Kanto Basin, Japan, to estimate the arrival times of the reflected waves. The arrival times of the reflected waves were found to be fast in the northern part of the Shimousa region and slow in the western and southern parts. These arrival times are consistent with those obtained using existing models. Because we observed a slight difference in the arrival times, the autocorrelation function at each station was used for tuning the S-wave velocity structure model of the sedimentary layers using the inversion technique. The tuned models perfectly match the autocorrelation functions in terms of the arrival time of the reflected waves from the seismic bedrock.


2019 ◽  
Author(s):  
Kosuke Chimoto ◽  
Hiroaki Yamanaka ◽  
Seckin Ozgur Citak ◽  
Ozlem Karagoz ◽  
Oguz Ozel ◽  
...  

2017 ◽  
Vol 48 (3) ◽  
pp. 255-263 ◽  
Author(s):  
Özgür Tuna Özmen ◽  
Hiroaki Yamanaka ◽  
Kosuke Chimoto ◽  
Ulubey Çeken ◽  
Mehmet Akif Alkan ◽  
...  

2021 ◽  
Vol 9 ◽  
Author(s):  
Yadab P. Dhakal ◽  
Takashi Kunugi

We analyzed strong-motion records at the ground and borehole in and around the Kanto Basin and the seafloor in the Japan Trench area from three nearby offshore earthquakes of similar magnitudes (Mw 5.8–5.9). The seafloor strong-motion records were obtained from S-net, which was established to enhance tsunami and earthquake early warnings after the 2011 great Tohoku-oki earthquake disaster. The borehole records were obtained from MeSO-net, a dense network of seismometers installed at a depth of 20 m in the Tokyo metropolitan area. The ground records were obtained from the K-NET and KiK-net networks, established after the 1995 great Hanshin-Awaji earthquake disaster. The MeSO-net and S-net stations record the shakings continuously, while the K-NET and KiK-net records are based on triggering thresholds. It is crucial to evaluate the properties of strong motions recorded by the S-net for earthquake early warning (EEW). This paper compared the peak ground accelerations (PGAs) and peak ground velocities (PGVs) between the S-net and K-NET/KiK-net stations. Because the MeSO-net records were from the borehole, we compared the PGAs and significant durations of the low-frequency motions (0.1–0.5 Hz) between the S-net and MeSO-net stations from identical record lengths. We found that the horizontal PGAs and PGVs at the S-net sites were similar to or larger than the K-NET/KiK-net sites for the S wave. In contrast, the vertical PGAs and PGVs at the S-net sites were similar to or smaller than those at the K-NET/KiK-net sites for the S wave. Particularly, the PGAs and PGVs for the P-wave parts on the vertical-component records of S-net were, on average, much smaller than those of K-NET/KiK-net records. The difference was more evident in the PGAs. The average ratios of S-wave horizontal to vertical PGAs were about 2.5 and 5 for the land and S-net sites, respectively. The low-frequency PGAs at the S-net sites were similar to or larger than those of the MeSO-net borehole records. The significant durations between the two-networks low-frequency records were generally comparable. Quantification of the results from a larger dataset may contribute to ground-motion prediction for EEW and the design of the offshore facilities.


2007 ◽  
Vol 63 (4) ◽  
pp. 639-654
Author(s):  
Katsuaki KONNO ◽  
Takahiro SUZUKI ◽  
Yasuhiro KAMATA ◽  
Takashi NAGAO
Keyword(s):  

2021 ◽  
Vol 111 (2) ◽  
pp. 627-653
Author(s):  
Eri Ito ◽  
Cécile Cornou ◽  
Fumiaki Nagashima ◽  
Hiroshi Kawase

ABSTRACT Based on the diffuse field concept for a horizontal-to-vertical spectral ratio of earthquakes (eHVSR), the effectiveness of eHVSRs to invert P- and S-wave velocity structures down to the seismological bedrock (with the S-wave velocity of 3  km/s or higher) has been shown in several published works. An empirical method to correct the difference between eHVSR and a horizontal-to-vertical ratio of microtremors (mHVSR), which is called earthquake-to-microtremor ratio (EMR), has also been proposed for strong-motion sites in Japan. However, the applicability of EMR outside of Japan may not be warranted. We test EMR applicability for the Grenoble basin in France with plentiful microtremor data together with observed weak-motion recordings at five sites. We thereby establish a systematic procedure to estimate the velocity structure from microtremors and delineate the fundamental characteristics of the velocity structures. We first calculate the EMR specific for the Grenoble basin (EMRG) and calculate pseudo eHVSR (pHVSR) from EMRG and mHVSR. We compare the pHVSRs with the eHVSRs at five sites and find sufficient similarity to each other. Then, we invert velocity structures from eHVSRs, pHVSRs, and mHVSRs. The velocity structures from eHVSRs are much closer to those from pHVSRs than those from mHVSRs. We need to introduce a number of layers with gradually increasing S-wave velocities below the geological basin boundary from a previous gravity study because the theoretical eHVSR of the model with a large velocity contrast has larger peak amplitudes than the observed. The depth of the S-wave velocity of 1.3  km/s (Z1.3) shows a strong, linear correlation with the geological boundary depth. Finally, we apply our validated methodology and invert velocity structures using pHVSRs at 14 sites where there are no observed earthquakes. The overall picture of Z1.3 at a cross section in the northeastern part of the basin corresponds to the geological boundary.


2020 ◽  
Vol 10 (1) ◽  
pp. 5157-5163 ◽  
Author(s):  
T. Nagao

Codes of practice and ground motion prediction equations involve ground structure proxies to account for seismic amplification. Although the ground consists of both shallow and deep subsurface, proxies are mainly related to the shallow subsurface as it is shallow subsurface information that is mostly available. However, as deep subsurface seismic amplification is not negligible, it may not be appropriate to use shallow subsurface proxies. In this study, the relationship between shallow and deep subsurface seismic amplification factors is discussed on the basis of S-wave velocity profile data from Japanese KiK-net strong-motion observation system stations. The correlation between typical proxies such as the average S-wave velocity of the top 30m of the ground surface and the seismic amplification factor was examined. Although there was a negative correlation between the two, the degree of the correlation was weak. A new proxy showing stronger correlations with the seismic amplification factor is proposed and its effectiveness is demonstrated.


Sign in / Sign up

Export Citation Format

Share Document