Monitoring of clay mine waste for utilization in the non-soil reclamation of mine waste dumps

Author(s):  
Zbigniew Bzowski
2021 ◽  
Vol 4 ◽  
pp. 1-8
Author(s):  
R.A. Adebimpe ◽  
A.O. Fatoye

Knowledge of tailings characteristics is required for utilisation and management purposes in the mining and construction industry. Tailings from the mine waste dumps at Itakpe iron ore mine were collected and analysed in the laboratory to determine their chemical and physical characteristics and these include; permeability, porosity, specific gravity, particle size distribution, chemical composition and bioavailability factor of element. Geochemical speciation with quantitative X-ray powder diffraction was used to evaluate the chemical and mineral composition of Itakpe iron ore tailings. The aim is to offer base line data necessary to assess metal mobility and bioavailability. The distribution of heavy metals such as Cu, Ni, Cd, Cr, Zn and Fe was determined using multi- step sequential extraction. The results obtained indicate that the permeability is 6.24 x 10-3 cm/sec; porosity is 35%; and specific gravity is 3.58. The tailings is well graded and is sand gravel. Nickel and Zinc was found to be considerably high in exchangeable and bound to carbonates fraction which are mobile region and is bound to Fe – Mn oxides which is slightly mobile region but the higher concentration of Ni found in residual fraction. The implication of this result is that Nickel and Zinc partially enter into the food chain. Chromium and Cadmium concentration result indicated that these metals can easily enter into the food chain because of their presence in the mobile region and their higher mobility percentage.


2015 ◽  
Vol 9 (4) ◽  
Author(s):  
Irina Nikolaevna Egorova ◽  
Olga Alexandrovna Neverova ◽  
Lyubov Sergeevna Dyshlyuk

2000 ◽  
Vol 53 (4) ◽  
pp. 442 ◽  
Author(s):  
Katrina J. Leavitt ◽  
George C. J. Fernandez ◽  
Robert S. Nowak

No Limits ◽  
2021 ◽  
pp. 18-21
Author(s):  
Maria Sztuka ◽  
Monika Jędrzejczyk-Korycińska

Silesia, i.e. the region of Poland which roughly dozen years ago was the most powerful industrial center in the country, is still struggling with residues of heavy metals, which are still present in the soil, water, mine waste dumps, and in the air – despite the fact that the number of polluting plants has been reduced and the use of appropriate filters, measures that have admittedly limited the emission of harmful substances into the environment, has been made obligatory. Metals will not disappear on their own; they are assimilated by plants, which animals feed on, and thus the “uninvited guests” are passed on. Humans are not spared by metals as well. The bare post-mining and post-production landfills around which housing estates are erected “endow” their residents with toxic dust. It turns out, however, that there are plant species which attach themselves to polluted areas and only exist where the concentration of heavy metals is high.


2017 ◽  

Guidelines for Mine Waste Dump and Stockpile Design is a comprehensive, practical guide to the investigation, design, operation and monitoring of mine waste dumps, dragline spoils and major stockpiles associated with large open pit mines. These facilities are some of the largest man-made structures on Earth, and while most have performed very well, there are cases where instabilities have occurred with severe consequences, including loss of life and extensive environmental and economic damage. Developed and written by industry experts with extensive knowledge and experience, this book is an initiative of the Large Open Pit (LOP) Project. It comprises 16 chapters that follow the life cycle of a mine waste dump, dragline spoil or stockpile from site selection to closure and reclamation. It describes the investigation and design process, introduces a comprehensive stability rating and hazard classification system, provides guidance on acceptability criteria, and sets out the key elements of stability and runout analysis. Chapters on site and material characterisation, surface water and groundwater characterisation and management, risk assessment, operations and monitoring, management of ARD, emerging technologies and closure are included. A chapter is also dedicated to the analysis and design of dragline spoils. Guidelines for Mine Waste Dump and Stockpile Design summarises the current state of practice and provides insight and guidance to mine operators, geotechnical engineers, mining engineers, hydrogeologists, geologists and other individuals that are responsible at the mine site level for ensuring the stability and performance of these structures. Readership includes mining engineers, geotechnical engineers, civil engineers, engineering geologists, hydrogeologists, environmental scientists, and other professionals involved in the site selection, investigation, design, permitting, construction, operation, monitoring, closure and reclamation of mine waste dumps and stockpiles.


Author(s):  
Dominik Niemiec ◽  
Miloš Duraj ◽  
Xianfeng Cheng ◽  
Marian Marschalko ◽  
Jan Kubáč

Sign in / Sign up

Export Citation Format

Share Document