Energy Materials and Energy Harvesting

The demands for wearable technologies continue to grow and novel approaches for powering these devices are being enabled by the advent of new energy materials and novel manufacturing strategies. In addition, decreasing the energy consumption of portable electronic devices has created a huge demand for the development of cost-effective and environment friendly alternate energy sources. Energy harvesting materials including piezoelectric polymer with its special properties make this demand possible. Herein, we develop a flexible and lightweight nanogenerator package based on polyvinyledene fluoride (PVDF)/LiCl electrospun nanofibers. The piezoelectric performance of the developed nanogenator is investigated to evaluate effect of the thickness of the as-spun mat on the output voltage using a vibration and impact test. It is found that the output voltage increases from 1.3 V to 5 V by adding LiCl as additive into the spinning solution compared with pure PVDF. The prepared PVDF/LiCl nanogenerator is able to generate voltage and current output of 3 V and 0.5 μA with a power density output of 0.3 μW cm−2 at the frequency of 200 Hz. It is found also that the developed nanogenerator can be utilized as a sensor to measure temperature changes from 30 °C to 90 °C under static pressure. The developed electrospun temperature sensor showed sensitivity of 0.16%/°C under 100 Pa pressure and 0.06%/°C under 220 Pa pressure. The obtained results suggested the developed energy harvesting textiles have promising applications for various wearable self-powered electrical devices and systems.

Download Full-text

Energy materials: supramolecular nanoparticles for solar energy harvesting

Nano Reviews ◽

10.3402/nano.v4i0.21079 ◽

2013 ◽

Vol 4 (1) ◽

pp. 21079 ◽

Cited By ~ 5

Author(s):

E. S. Shibu ◽

A. Sonoda ◽

Z. Tao ◽

Q. Feng ◽

A. Furube ◽

...

Keyword(s):

Energy Harvesting ◽

Solar Energy ◽

Energy Materials ◽

Solar Energy Harvesting ◽

Supramolecular Nanoparticles

Download Full-text

Energy materials: Larger arms, faster energy

Nature China ◽

10.1038/nchina.2009.246 ◽

2010 ◽

Cited By ~ 1

Author(s):

Felix Cheung

Keyword(s):

Energy Materials

Download Full-text

Energy materials: If you can't beat them, join them

Nature China ◽

10.1038/nchina.2009.70 ◽

2009 ◽

Author(s):

Felix Cheung

Keyword(s):

Energy Materials

Download Full-text

Analysis of magneto rheological elastomers for energy harvesting systems

International Journal of Applied Electromagnetics and Mechanics ◽

10.3233/jae-209350 ◽

2020 ◽

Vol 64 (1-4) ◽

pp. 439-446

Author(s):

Gildas Diguet ◽

Gael Sebald ◽

Masami Nakano ◽

Mickaël Lallart ◽

Jean-Yves Cavaillé

Keyword(s):

Magnetic Field ◽

Energy Harvesting ◽

Shear Strain ◽

Magnetic Induction ◽

Magnetic Particles ◽

Homogeneous Magnetic Field ◽

Electrical Signal ◽

Harvesting Systems ◽

Dc Bias ◽

Magneto Rheological

Magneto Rheological Elastomers (MREs) are composite materials based on an elastomer filled by magnetic particles. Anisotropic MRE can be easily manufactured by curing the material under homogeneous magnetic field which creates column of particles. The magnetic and elastic properties are actually coupled making these MREs suitable for energy conversion. From these remarkable properties, an energy harvesting device is considered through the application of a DC bias magnetic induction on two MREs as a metal piece is applying an AC shear strain on them. Such strain therefore changes the permeabilities of the elastomers, hence generating an AC magnetic induction which can be converted into AC electrical signal with the help of a coil. The device is simulated with a Finite Element Method software to examine the effect of the MRE parameters, the DC bias magnetic induction and applied shear strain (amplitude and frequency) on the resulting electrical signal.

Download Full-text

Simply supported FPEDs connected by springs for broadband energy harvesting

International Journal of Applied Electromagnetics and Mechanics ◽

10.3233/jae-209323 ◽

2020 ◽

Vol 64 (1-4) ◽

pp. 201-210

Author(s):

Yoshikazu Tanaka ◽

Satoru Odake ◽

Jun Miyake ◽

Hidemi Mutsuda ◽

Atanas A. Popov ◽

...

Keyword(s):

Energy Harvesting ◽

Evaluation Method ◽

Energy Harvester ◽

Vibrational Energy ◽

Functional Materials ◽

Vibration Energy ◽

Theoretical Evaluation ◽

Vibration Energy Harvester ◽

Polyvinylidene Difluoride ◽

Simply Supported

Energy harvesting methods that use functional materials have attracted interest because they can take advantage of an abundant but underutilized energy source. Most vibration energy harvester designs operate most effectively around their resonant frequency. However, in practice, the frequency band for ambient vibrational energy is typically broad. The development of technologies for broadband energy harvesting is therefore desirable. The authors previously proposed an energy harvester, called a flexible piezoelectric device (FPED), that consists of a piezoelectric film (polyvinylidene difluoride) and a soft material, such as silicon rubber or polyethylene terephthalate. The authors also proposed a system based on FPEDs for broadband energy harvesting. The system consisted of cantilevered FPEDs, with each FPED connected via a spring. Simply supported FPEDs also have potential for broadband energy harvesting, and here, a theoretical evaluation method is proposed for such a system. Experiments are conducted to validate the derived model.

Download Full-text

Renewable Energy Resources for Better Economics and Sustainable Living in Rural and Desert Areas

Journal of Business and Economics ◽

10.15341/jbe(2155-7950)/12.10.2019/004 ◽

2019 ◽

Vol 10 (12) ◽

pp. 1165-1171

Author(s):

Karl Gatterer ◽

◽

Salah Arafa ◽

Keyword(s):

Renewable Energy ◽

Poverty Reduction ◽

Energy Resources ◽

Green Economy ◽

Renewable Energy Resources ◽

Economic Activities ◽

Energy Materials ◽

Sustainable Living ◽

Sustainable Community Development ◽

Access To Knowledge

Reliable and affordable energy is the key for the socio-economic development in rural and desert communities worldwide. While energy can be used for consumption purposes such as Lighting, Access to Information, Comfort and Entertainment, productive use of renewable energy is the key enabler for SMEs and Economy to grow. The paper examines the complex interactions among Energy, Materials, Water, Food, Building, Employment and Environment. It also discusses the implementation of renewable energy technologies to overcome some of barriers faced by rural villages and desert communities. It shows some of the special applications and approaches used over the past few decades in energy conversion, consumption and conservation to achieve poverty reduction, social justice and sustainable development. Field experiences in Basaisa projects, Egypt showed that open free dialogues with all stakeholders, site-specific education and training, appropriate local financing systems and access to knowledge are key-elements and essential factors for achieving green economy and sustainable community development. The coming decade will see a continued expansion of knowledge about renewable energy resources and its useful applications as systems friendly to the environment and as tools for economic activities, sustainable living and growth in rural and desert communities.

Download Full-text