Long-Term Additive Trends in Aerospace Applications

Author(s):  
Carl Snyder ◽  
Lois Gschwender ◽  
Shashi Sharma
2004 ◽  
Vol 177 (2) ◽  
pp. 449-456 ◽  
Author(s):  
R Naslain ◽  
A Guette ◽  
F Rebillat ◽  
R Pailler ◽  
F Langlais ◽  
...  

2011 ◽  
Vol 20 (8) ◽  
pp. 1217-1242 ◽  
Author(s):  
K. B. Katnam ◽  
A. D. Crocombe ◽  
H. Sugiman ◽  
H. Khoramishad ◽  
I. A. Ashcroft

Advanced structural adhesives are now an important joining technique in automobile and aerospace applications. The perceived uncertainty in the long-term structural performance of bonded members when subjected to static/fatigue loads in aggressive environments is probably restricting an even more widespread use of this joining technology. In this article, the effect of moisture on the static and fatigue resistances of adhesively bonded laminate joints was investigated. Experimental tests were performed on both aged and unaged adhesively bonded laminate joints for static and fatigue responses. Further, using a cohesive zone approach for the adhesive bondlines, a combined diffusion–stress analysis was developed to predict the progressive damage observed in the joints tested experimentally. The numerical predictions were found to be in good agreement with the experimental test results.


Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5568
Author(s):  
James S. Bennett ◽  
Brian E. Vyhnalek ◽  
Hamish Greenall ◽  
Elizabeth M. Bridge ◽  
Fernando Gotardo ◽  
...  

Aerospace technologies are crucial for modern civilization; space-based infrastructure underpins weather forecasting, communications, terrestrial navigation and logistics, planetary observations, solar monitoring, and other indispensable capabilities. Extraplanetary exploration—including orbital surveys and (more recently) roving, flying, or submersible unmanned vehicles—is also a key scientific and technological frontier, believed by many to be paramount to the long-term survival and prosperity of humanity. All of these aerospace applications require reliable control of the craft and the ability to record high-precision measurements of physical quantities. Magnetometers deliver on both of these aspects and have been vital to the success of numerous missions. In this review paper, we provide an introduction to the relevant instruments and their applications. We consider past and present magnetometers, their proven aerospace applications, and emerging uses. We then look to the future, reviewing recent progress in magnetometer technology. We particularly focus on magnetometers that use optical readout, including atomic magnetometers, magnetometers based on quantum defects in diamond, and optomechanical magnetometers. These optical magnetometers offer a combination of field sensitivity, size, weight, and power consumption that allows them to reach performance regimes that are inaccessible with existing techniques. This promises to enable new applications in areas ranging from unmanned vehicles to navigation and exploration.


2017 ◽  
pp. 589-596
Author(s):  
Carl E. Snyder ◽  
Lois J. Gschwender ◽  
Shashi Kant Sharma

Author(s):  
Carl Snyder ◽  
Lois Gschwender ◽  
Shashi Sharma

Author(s):  
Martin Nese ◽  
Bjo̸rn Erik Seeberg

A novel piezoresistive silicon MEMS pressure sensor has been developed for full-scale measurement from 10 bar to > 1000 bar for high-precision oil & gas, aerospace and space applications. The silicon element has a tubular design with an externally stable resistor bridge to detect the pressure-induced stress. The fabrication process is by silicon planar technology and MEMS processes, such as silicon fusion bonding and electrochemical etching. The concept is favorable in rough field applications due to several key properties from small dimensions and deflections, high material rigidity, symmetry, a large output signal, fast pressure and temperature response and low acceleration sensitivity. The overload capability is several times the full-scale, since pressure mainly generates compressive stress. Long-term and hysteresis effects are minimized by eliminating the package-induced stress due to a relatively large distance from the die attach to the sensitive region. Total accuracy for a pressure range 700 bar and a wide temperature range −7 to 135°C is better than 0.01%FS. Typical hysteresis and repeatability is ± 10 ppm.


2019 ◽  
Vol 42 ◽  
Author(s):  
John P. A. Ioannidis

AbstractNeurobiology-based interventions for mental diseases and searches for useful biomarkers of treatment response have largely failed. Clinical trials should assess interventions related to environmental and social stressors, with long-term follow-up; social rather than biological endpoints; personalized outcomes; and suitable cluster, adaptive, and n-of-1 designs. Labor, education, financial, and other social/political decisions should be evaluated for their impacts on mental disease.


2016 ◽  
Vol 39 ◽  
Author(s):  
Mary C. Potter

AbstractRapid serial visual presentation (RSVP) of words or pictured scenes provides evidence for a large-capacity conceptual short-term memory (CSTM) that momentarily provides rich associated material from long-term memory, permitting rapid chunking (Potter 1993; 2009; 2012). In perception of scenes as well as language comprehension, we make use of knowledge that briefly exceeds the supposed limits of working memory.


Sign in / Sign up

Export Citation Format

Share Document