Size-effect sensitivity - Three point bending test versus wedge splitting test

2002 ◽  
pp. 441-453
Keyword(s):  
Size Effect ◽  
Bending Test ◽  
Three Point Bending ◽  
Wedge Splitting Test ◽  
Splitting Test ◽  
Wedge Splitting

scholarly journals Vibrated Concrete vs. Self-Compacting Concrete: Comparison of Fracture Mechanics Properties

2014 ◽  
Vol 601 ◽  
pp. 199-202
Author(s):  
Sara Korte ◽  
Veerle Boel ◽  
Wouter de Corte ◽  
Geert de Schutter
Keyword(s):  
Fracture Mechanics ◽  
Mouth Opening ◽  
Bending Test ◽  
Crack Mouth Opening Displacement ◽  
Self Compacting Concrete ◽  
Opening Displacement ◽  
Three Point Bending ◽  
Fracture Parameters ◽  
Wedge Splitting Test ◽  
Splitting Test

This study focuses on the fracture mechanics aspect of self-compacting concrete, compared to vibrated concrete. The most commonly used experiments to investigate the toughness and cracking behaviour of concrete are the three-point bending test (3PBT) on small, notched beams, and the wedge-splitting test (WST) on cubic samples with guiding groove and starter notch. From the resulting P-CMOD curves (applied load versus crack mouth opening displacement), different fracture parameters, such as fracture energy and fracture toughness, can be extracted. Moreover, using inverse analysis, the σ-w relationship (tensile stress versus crack width) can be derived. This paper lists the results of a series of tests on samples, made of VC, SCC of equal strength, and SCC with identical w/c factor. Subsequently, a comparison of the mechanical characteristics is made, revealing important differences regarding several fracture parameters.

Comparison of Fracture Energy Values Obtained from 3PB, WST and CT Test Configurations

2014 ◽  
Vol 969 ◽  
pp. 89-92 ◽  
Author(s):  
Táňa Holušová ◽  
Stanislav Seitl ◽  
Alfonso Fernández Canteli
Keyword(s):  
Fracture Energy ◽  
Fatigue Loading ◽  
Compact Tension ◽  
Bending Test ◽  
Three Point Bending ◽  
Concrete Failure ◽  
Wedge Splitting Test ◽  
Splitting Test ◽  
Fracture Tests ◽  
Alternative Testing

Modeling of concrete failure under fatigue loading is becoming a field of interest. Possible alternative testing solutions are now being searched. In this paper, the fracture energy for a certain concrete, resulting from three traditional fracture tests, namely three point bending test, wedge-splitting test and modified compact tension test, is investigated.

scholarly journals Fracture and Size Effect of PFRC Specimens Simulated by Using a Trilinear Softening Diagram: A Predictive Approach

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3795
Author(s):  
Fernando Suárez ◽  
Jaime C. Gálvez ◽  
Marcos G. Alberti ◽  
Alejandro Enfedaque
Keyword(s):  
Reinforced Concrete ◽  
Size Effect ◽  
A Priori ◽  
Plain Concrete ◽  
Specimen Size ◽  
Bending Test ◽  
Orientation Factor ◽  
Fibre Reinforced Concrete ◽  
Softening Function ◽  
Three Point Bending

The size effect on plain concrete specimens is well known and can be correctly captured when performing numerical simulations by using a well characterised softening function. Nevertheless, in the case of polyolefin-fibre-reinforced concrete (PFRC), this is not directly applicable, since using only diagram cannot capture the material behaviour on elements with different sizes due to dependence of the orientation factor of the fibres with the size of the specimen. In previous works, the use of a trilinear softening diagram proved to be very convenient for reproducing fracture of polyolefin-fibre-reinforced concrete elements, but only if it is previously adapted for each specimen size. In this work, a predictive methodology is used to reproduce fracture of polyolefin-fibre-reinforced concrete specimens of different sizes under three-point bending. Fracture is reproduced by means of a well-known embedded cohesive model, with a trilinear softening function that is defined specifically for each specimen size. The fundamental points of these softening functions are defined a priori by using empirical expressions proposed in past works, based on an extensive experimental background. Therefore, the numerical results are obtained in a predictive manner and then compared with a previous experimental campaign in which PFRC notched specimens of different sizes were tested with a three-point bending test setup, showing that this approach properly captures the size effect, although some values of the fundamental points in the trilinear diagram could be defined more accurately.

Experimental Investigation on Relative Crack Length For Fracture Toughness of Concrete

2010 ◽  
Vol 146-147 ◽  
pp. 1524-1528 ◽  
Author(s):  
Xue Zhi Wang ◽  
Zong Chao Xu ◽  
Zhong Bi ◽  
Hao Wang
Keyword(s):  
Fracture Toughness ◽  
Experimental Investigation ◽  
Crack Length ◽  
Fracture Toughness Test ◽  
Test Results ◽  
Toughness Test ◽  
Wedge Splitting Test ◽  
Splitting Test ◽  
Wedge Splitting

The wedge splitting test specimens with three series of different relative crack length were used to study the influences of relative crack length on the fracture toughness of common concrete. The suitable formulation for fracture toughness of concrete with different relative crack length was gotten on comparing between fracture toughness test results and computation results of the model developed from Hu formula.

Numerical Stress Analysis of the Biaxial Tension-Compression Wedge-Splitting Test in Vicinity of the Crack Tip

2018 ◽  
Vol 784 ◽  
pp. 85-90
Author(s):  
Stanislav Seitl ◽  
Petr Miarka ◽  
Ildikó Merta ◽  
Zbyněk Keršner
Keyword(s):  
Stress Analysis ◽  
Mechanical Test ◽  
Biaxial Tension ◽  
Crack Tip ◽  
Biaxial Stress ◽  
Stress Fields ◽  
Wedge Splitting Test ◽  
Splitting Test ◽  
Compression Wedge ◽  
Wedge Splitting

Wedge-splitting test is widely used fracture mechanical test for its stability in measurement during the testing and many papers were published. However, the biaxial wedge-splitting test is relatively a new method and the numerical stress analysis of such test is necessary. Especially the investigation of the stress fields in the vicinity of the crack tip. In this contribution, influence of various biaxial stress level is discussed on values of first and second terms of William’s expansion.

Wedge-Splitting Test – Determination of Minimal Starting Notch Length for Various Cement Based Composites Part I: Cohesive Crack Modelling

2010 ◽  
Vol 452-453 ◽  
pp. 77-80 ◽  
Author(s):  
Václav Veselý ◽  
Ladislav Řoutil ◽  
Stanislav Seitl
Keyword(s):  
Fracture Mechanics ◽  
Cohesive Crack ◽  
Crack Model ◽  
Singular Stress ◽  
Initiation Point ◽  
Linear Elastic ◽  
Wedge Splitting Test ◽  
Splitting Test ◽  
Notch Length ◽  
Wedge Splitting

The geometric proportions of cube-shaped specimens subjected to wedge-splitting tests are numerically studied in the paper. The minimal notch length for specimens made of cement based composites varying in characteristic length of the material (a measure of material brittle-ness/heterogeneity) is verified using finite element method code with an implemented cohesive crack model (ATENA). The problem of assigning the crack initiation point (the notch tip vs. the groove corner in the load-imposing area of the specimen) is solved numerically also using both the theory of linear elastic fracture mechanics and the theory of the fracture mechanics of generalized singular stress concentrators in the second part of the two-part paper. Results ob-tained by the different approaches are compared. The minimal notch length is recommended.

Sign in / Sign up

Export Citation Format

Share Document