Investigating the climate-adaptive design strategies of residential earth-sheltered buildings in Iran

PurposeThe earth-sheltered building is an adaptive strategy reducing energy consumption as well as increasing thermal comfort of the residents. Although this idea historically implemented in the city of Yazd, Iran, its effects on thermal comfort have not been studied thoroughly. This paper aims to discuss and analyze energy performance, in terms of parameters such as orientation, underground depth, nocturnal ventilation and its subsequent effects on thermal comfort in earth-sheltered buildings in Yazd.Design/methodology/approachUsing EnergyPlus software, the obtained numeric data are precisely modeled, simulated and analyzed.FindingsResults show that there is a direct relationship between depth of construction and energy consumption savings. The more construction depth of earth-sheltered buildings, the more percentage of energy consumption savings, that is of a higher rate in comparison to the aboveground ones. However, in south orientation, energy saving significantly reduces from depth of 2 m downwards and the annual indoor temperature fluctuation decreases by 50%. This subsequently yields to experiencing indoor thermal comfort for a significant number of days throughout the year. Considering the effects of orientation factor, the south orientation regardless of the depth provides the most desired outcome regarding energy savings.Originality/valueSimulating the model generalized to the sunken courtyard can approve that the results of this research can be applied to the other models.

Orientation of Polylactic Acid–Chitin Nanocomposite Films via Combined Calendering and Uniaxial Drawing: Effect on Structure, Mechanical, and Thermal Properties

The orientation of polymer composites is one way to increase the mechanical properties of the material in a desired direction. In this study, the aim was to orient chitin nanocrystal (ChNC)-reinforced poly(lactic acid) (PLA) nanocomposites by combining two techniques: calendering and solid-state drawing. The effect of orientation on thermal properties, crystallinity, degree of orientation, mechanical properties and microstructure was studied. The orientation affected the thermal and structural behavior of the nanocomposites. The degree of crystallinity increased from 8% for the isotropic compression-molded films to 53% for the nanocomposites drawn with the highest draw ratio. The wide-angle X-ray scattering results confirmed an orientation factor of 0.9 for the solid-state drawn nanocomposites. The mechanical properties of the oriented nanocomposite films were significantly improved by the orientation, and the pre-orientation achieved by film calendering showed very positive effects on solid-state drawn nanocomposites: The highest mechanical properties were achieved for pre-oriented nanocomposites. The stiffness increased from 2.3 to 4 GPa, the strength from 37 to 170 MPa, the elongation at break from 3 to 75%, and the work of fracture from 1 to 96 MJ/m3. This study demonstrates that the pre-orientation has positive effect on the orientation of the nanocomposites structure and that it is an extremely efficient means to produce films with high strength and toughness.

Accurate grasp detection learning using oriented regression loss

Purpose Robot automatic grasping has important application value in industrial applications. Recent works have explored on the performance of deep learning for robotic grasp detection. They usually use oriented anchor boxes (OABs) as detection prior and achieve better performance than previous works. However, the parameters of their loss belong to different coordinates, this may affect the regression accuracy. This paper aims to propose an oriented regression loss to solve the problem of inconsistency among the loss parameters. Design/methodology/approach In the oriented loss, the center coordinates errors between the ground truth grasp rectangle and the predicted grasp rectangle rotate to the vertical and horizontal of the OAB. And then the direction error is used as an orientation factor, combining with the errors of the rotated center coordinates, width and height of the predicted grasp rectangle. Findings The proposed oriented regression loss is evaluated on the YOLO-v3 framework to the grasp detection task. It yields state-of-the-art performance with an accuracy of 98.8% and a speed of 71 frames per second with GTX 1080Ti on Cornell datasets. Originality/value This paper proposes an oriented loss to improve the regression accuracy of deep learning for grasp detection. The authors apply the proposed deep grasp network to the visual servo intelligent crane. The experimental result indicates that the approach is accurate and robust enough for real-time grasping applications.

Coupling Parameters for Modeling the Near-Field Heat Transfer Between Molecules

The behavior of near-field heat transfer between molecules at gaps which are small compared to wavelength of light is greatly influenced by non-radiative dipole-dipole interactions between the molecules. Here we derive the coupling parameters and estimate the near-field heat transfer between two molecules using coupled Drude oscillators. The predictions from this model are verified with results from standard fluctuational electrodynamics principles. The effect of orientation factor of the dipole moments in the molecules traditionally taken into consideration for analysis of resonance energy transfer between molecules but hitherto overlooked for near-field heat transfer is also discussed.

Fracture and Size Effect of PFRC Specimens Simulated by Using a Trilinear Softening Diagram: A Predictive Approach

The size effect on plain concrete specimens is well known and can be correctly captured when performing numerical simulations by using a well characterised softening function. Nevertheless, in the case of polyolefin-fibre-reinforced concrete (PFRC), this is not directly applicable, since using only diagram cannot capture the material behaviour on elements with different sizes due to dependence of the orientation factor of the fibres with the size of the specimen. In previous works, the use of a trilinear softening diagram proved to be very convenient for reproducing fracture of polyolefin-fibre-reinforced concrete elements, but only if it is previously adapted for each specimen size. In this work, a predictive methodology is used to reproduce fracture of polyolefin-fibre-reinforced concrete specimens of different sizes under three-point bending. Fracture is reproduced by means of a well-known embedded cohesive model, with a trilinear softening function that is defined specifically for each specimen size. The fundamental points of these softening functions are defined a priori by using empirical expressions proposed in past works, based on an extensive experimental background. Therefore, the numerical results are obtained in a predictive manner and then compared with a previous experimental campaign in which PFRC notched specimens of different sizes were tested with a three-point bending test setup, showing that this approach properly captures the size effect, although some values of the fundamental points in the trilinear diagram could be defined more accurately.

Effect of Welding Orientation in Angular Distortion in Multipass GMAW

The use of the welding process on an industrial scale has become significant over the years and is currently among the main processes for joining metallic materials. Along the weld, structural changes occur in the vicinity of the joint. These thermal stresses and geometric distortions are mostly undesirable and are complex to predict with precision. Using S235JR steel as the base material, laboratory experiments were carried out using the multipass GMAW process, with the aim of investigating the influence of the welding direction on angular distortion. To measure the distortions, a methodology was applied using equipment to identify the coordinates in the operational space with metrological precision. Through metrological and statistical analyses, we found that the orientation factor significantly influenced the final distortions and that the alternated orientation sequence resulted in less distortions.

Achieving High Efficiency and Pure Blue Color in Hyperfluorescence Organic Light Emitting Diodes using Organo-Boron Based Emitters

In the field of organic light emitting diodes (OLEDs), organo-boron based thermally activated delayed fluorescence (TADF) emitters have reached great achievement. However, it is still challenging to achieve pure blue color (CIE y < 0.20) along with high efficiencies. To overcome these hurdles, hyperfluorescence (HF) suggest a key strategy in future OLED applications. Here, we report two TADF materials, pMDBA-DI and mMDBA-DI. Further, a pure blue multi resonance type tert-butyl substituted fluorescence emitter, t-Bu-ν-DABNA was also synthesized. Among our synthesized TADF materials based pure blue HF devices, mMDBA-DI as TADF sensitized host with t-Bu-ν-DABNA fluorescence emitter exhibited a high external quantum efficiency of 40.7% (Lambertian assumption) along with narrow emission with full width at half maximum of 19 nm (CIE y = 0.15). Moreover, we analyzed that such high device efficiency is mainly attributed to the high orientation factor, enhanced photoluminescence quantum yield, and a good TADF characteristic of t-Bu-ν-DABNA with high Förster resonance energy transfer.

Fracture and size effect of PFRC specimens simulated by using a trilinear softening diagram: a predictive approach

Size effect on plain concrete specimens is well known and can be correctly captured when performing numerical simulations by using a well characterised softening function, but in the case of fibre reinforced concrete this is not directly applicable, since an only diagram cannot capture the material behaviour on elements with different size due to dependence of the orientation factor of the fibres with the size of the specimen. In previous works, the use of a trilinear softening diagram proved to be very convenient for reproducing fracture of polyolefin fibre reinforced concrete elements, but only if it is previously adapted for each specimen size. In this work, a predictive methodology is used to reproduce fracture of polyolefin fibre reinforced concrete specimens of different sizes under three-point bending. Fracture is reproduced by means of a well known embedded cohesive model, with a trilinear softening function that is defined specifically for each specimen size. The fundamental points of these softening functions are defined a priori by using empirical expressions proposed in past works, based on an extensive experimental background. Therefore, the numerical results are obtained in a predictive manner, and then compared with a previous experimental campaign, showing that this approach properly captures the size effect, although some values of the fundamental points in the trilinear diagram could be defined more accurately.

Study of the Preferred Orientation of Hydroxyapatite in Ivory from Zimbabwe and Mammoth Ivory from Siberia

In this paper, the pole figures plotted from X-ray diffraction data are employed to analyze the orientation of hydroxyapatite in ivory and mammoth ivory for the first time. The results present evidence of the lamellar structure and the hydroxyapatite appeared as tabular. A preferred orientation of hydroxyapatite was revealed in terms of the calculated orientation factor and the characteristics found in the pole figures. The c-axes of hydroxyapatite are mainly oriented along the growth direction. Both a-axes are on the left of the angle bisector of Retzius. Approximately 25–30° separates the a-axes and the angle bisector of Retzius in ivory, whereas the figure is approximately 10–15° in mammoth ivory. Our work is significant in providing more accurate knowledge of the shapes and organizational state of bio-mineral crystals and providing insight into crystal formation and development in bio-mineralization.