Experimental investigation of panel zone in steel beam-to-column joint at elevated temperature

2010 ◽  
pp. 571-572
Author(s):  
M Strej_ek ◽  
F Wald
Keyword(s):  
Experimental Investigation ◽  
Elevated Temperature ◽  
Steel Beam ◽  
Panel Zone ◽  
Column Joint

A Finite Element (FE) simulation of naked solid steel beam at elevated temperature

2018 ◽  
Vol 10 (9) ◽  
Author(s):  
Fariz Aswan Ahmad Zakwan ◽  
◽  
Renga Rao Krishnamoorthy ◽  
Azmi Ibrahim ◽  
Ruqayyah Ismail ◽  
...  
Keyword(s):  
Finite Element ◽  
Elevated Temperature ◽  
Fe Simulation ◽  
Steel Beam

Effect of Sintering Schedule to the Alloyability of FeCrAl Powder Mix Formed at above Ambient Temperature

2015 ◽  
Vol 1115 ◽  
pp. 199-202
Author(s):  
Mujibur M. Rahman ◽  
A.A.A. Talib
Keyword(s):  
Experimental Investigation ◽  
Elevated Temperature ◽  
Ambient Temperature ◽  
Axial Loading ◽  
Xrd Analysis ◽  
Compaction Process ◽  
Argon Gas ◽  
Fecral Alloy ◽  
Powder Mass ◽  
Die Compaction

This paper presents the outcomes of an experimental investigation on the effect of sintering schedule to the alloyability of FeCrAl powder mix formed through warm powder compaction process. A lab-scale uni-axial die compaction rig was designed and fabricated which enabled the compaction of powder mass at elevated temperature. Iron (Fe) powder ASC 100.29 was mechanically mixed with other alloying elements, namely chromium (Cr), and aluminum (Al) for 60 minutes and compacted at 150°C by applying 130 kN axial loading to generate green compacts. The defect-free green compacts were subsequently sintered in an argon gas fired furnace for different holding times. The sintered samples were then undergone XRD analysis. The results revealed that the alloyability of sintered products were affected by the holding time during sintering. The sample sintered at 800°C for 60 minutes showed the highest intensity of FeCrAl alloy.

Experimental study of steel beam‐to‐column connections with bolted joints where the dissipative zone is the panel zone

2020 ◽  
Vol 13 (1) ◽  
pp. 22-29
Author(s):  
Atsushi Sato ◽  
Yohei Koyama ◽  
Hideki Idota ◽  
Yuki Sato ◽  
Shigeharu Yagi ◽  
...  
Keyword(s):  
Experimental Study ◽  
Bolted Joints ◽  
Steel Beam ◽  
Panel Zone
Sign in / Sign up

Export Citation Format

Share Document