Numerical study of a massive reinforced concrete structure at early age

Author(s):  
L Buffo-Lacarrière ◽  
A Sellier
Buildings ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 39 ◽  
Author(s):  
André Furtado ◽  
Nelson Vila-Pouca ◽  
Humberto Varum ◽  
António Arêde

Following the strong earthquake on April 25, 2015 in Nepal, a team from the University of Porto, in collaboration with other international institutions, made a field study on some of the most affected areas in the capital region of Kathmandu. One of the tasks was the study of a high-rise settle of buildings that were damaged following the earthquake sequence. A survey damage assessment was performed to a 15-storey infilled reinforced concrete structure, which will be detailed in the manuscript. Moreover, ambient vibration tests were carried out to determine the natural frequencies and corresponding vibration modes of the structure. The main aim of this manuscript is to present a numerical study concerning the influence of the masonry infill walls in the structure seismic response. For this, three numerical models were built discriminating the situations with and without damage and nondamaged infill walls. Validation and calibration of the numerical model was ensured by comparing the numerical frequencies with those obtained from ambient vibration tests. In addition, linear elastic analyses were carried out, using real accelerograms from the Gorkha earthquake to assess and quantify the major differences between the models in terms of inter-storey drifts ratios, inter-storey shear forces and seismic loadings.


2011 ◽  
Vol 94-96 ◽  
pp. 1082-1086
Author(s):  
Shu Ping Cong ◽  
Lai Wang ◽  
Jin Sheng Han

Load-carrying system of reinforced concrete structure on construction is different from load-carrying system on service life. This temporary load-carrying system is composed of shores and concrete members of early age on construction. Geometrical model and material property of structure are time-varying on construction. Through secondary development of ANSYS, the processes of placing concrete and removing shore are simulated on construction. Critical effect factors are determined through the analysis on mechanical property of temporary load-carrying system, such as shore stiffness, foundation stiffness and diurnal temperature difference. Results of analog calculation to temporary load-carrying system will provide basis for shoring system design and structure reliability analysis on construction.


2010 ◽  
Vol 36 ◽  
pp. 176-181
Author(s):  
Xian Feng He ◽  
Shou Gang Zhao ◽  
Yuan Bao Leng

The corrosion of steel will have a bad impact on the safety of reinforced concrete structure. In severe cases, it may even be disastrous. In order to understand the impact of steel corrosion on the structure, tests are carried out to study corrosion and expansion rules of steel bars as well as the impact rules of corrosion on bond force between steel and concrete. The results show that wet and salty environment will result in steel corrosion; relatively minor corrosion will not cause expansion cracks of protection layers; when steel rust to a certain extent, it will cause cracks along the protection layer; when there exists minor corrosion in steel and the protection layer does not have expansion cracks, the bond force is still large and rapidly decreases as the corrosion rate increases.


2021 ◽  
Author(s):  
Lisa Ptacek ◽  
Alfred Strauss ◽  
Clémence Bos ◽  
Martin Peyerl

<p>The curing of concrete is extremely important for the durability of a reinforced concrete structure. In practice, due to the complex construction processes, the very limited phases and the lack of control, aftertreatment is often neglected by executing companies. Hence infrastructure operators are therefore very interested in having a robust, simple tool that enables aftertreatment to be easily checked and, as a result, to convey the importance of this process step to the client. In the project presented here, classic and novel test methods are presented and discussed, as well as their suitability for the detection of the aftertreatment quality on laboratory samples and subsequently on some real structures.</p>


Sign in / Sign up

Export Citation Format

Share Document