Study on goaf spontaneous combustion prediction simulation of gas-drainage in spontaneously flammable and thick coal seam

Author(s):  
Zhongya Zheng ◽  
Qun Zhang ◽  
Changfu Xu ◽  
Chao Ma ◽  
Haifei Yao ◽  
...  
2009 ◽  
Vol 15 (3) ◽  
pp. 299-303 ◽  
Author(s):  
Tian-cai He ◽  
Hai-gui Li ◽  
Hai-jun Zhang

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Youxin Zhao ◽  
Qingjie Qi ◽  
Xinlei Jia

To accurately and reliably predict the time of spontaneous combustion of fractured coal around a borehole induced by gas drainage along the seam, this study performed an orthogonal test taking the No. 10 Coal Mine of Pingdingshan as the research object, in terms of the suction negative pressure and coal seam buried depth. COMSOL Multiphysics was used to model the orthogonal test results, and a multielement statistical analysis of four factors and their relationships with the spontaneous combustion of coal around the borehole and a single-factor analysis in line with the site conditions were performed on the modeling results through multiple regression. The results showed a nonlinear regression relationship between the sealing hole length, sealing hole depth, negative pressure, and coal seam depth and the spontaneous combustion of the coal around the gas drainage borehole; the prediction regression model is significant. Taking the field gas drainage in the No. 10 Coal Mine of Pingdingshan as an example, the relationship between the time of spontaneous combustion of gas drainage and the drainage pressure follows a power of two. When the drainage negative pressure is less than 45 kPa, the coal around the borehole is more likely to undergo spontaneous combustion with increasing pressure, and the sealing hole length has a positive linear correlation with the time of spontaneous combustion of the coal around the borehole. When the sealing hole length is 23 m, the time of spontaneous combustion of the coal around the gas drainage hole is >500 days, and the coal around the borehole does not easily undergo spontaneous combustion. When the sealing depth is 15 m, the time of spontaneous combustion of the coal around the gas drainage hole is 76 days, which is most likely to cause spontaneous combustion.


2012 ◽  
Vol 204-208 ◽  
pp. 3469-3475
Author(s):  
Guo Liang Lu ◽  
Chen Wang ◽  
Yao Dong Jiang ◽  
Hong Wei Wang

In order to improve the gas drainage effect of "three soft" coal seam with low-permeability and eliminate the gas overrun in the upper corner and return air during the production process, this paper did an exploration on the comprehensive gas management on the fully mechanized caving face of gassy mines in Xuangang mine area and its application achieved a good result.


Author(s):  
Rong Zhang ◽  
Yuanping Cheng ◽  
Liang Yuan ◽  
Hongxing Zhou ◽  
Liang Wang ◽  
...  

2021 ◽  
Vol 236 ◽  
pp. 01029
Author(s):  
Siqian Li

In order to solve the problems of low gas drainage rate and long drainage time in thick coal seam with low permeability, ultra-high pressure hydraulic slotting pressure relief and permeability enhancement technology was applied in the test. The practice shows that after adopting the ultra-high pressure hydraulic slotting, the gas drainage rate is greatly improved, the time for reaching the standard of drainage is shortened, and the difficult problem of gas control in the mining face of thick coal seam is solved, which provides technical guidance for high-efficiency gas control in thick coal seam with similar conditions in mining area.


2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Jianhong Ma ◽  
Chao Hou ◽  
Jiangtao Hou

Protective layer mining, as a dominating method for preventing coal and gas outburst, is generally adopted in highly gassy coal mines. In the absence of a suitable thickness coal seam to serve as the protective layer, the rock-coal composite protective layer was proposed in this paper. We conducted a series of simulations and engineering measurements to investigate the protective effect under the mining of the rock-coal composite protective layer of the Zhongtai coal mine located in the Hebi area of Henan, China. The numerical simulation analysis showed that, after the completion of protective layer mining, the minimum vertical stress of the No. 2-1 coal seam had been reduced to 3.46 MPa. The maximum vertical displacement of the No. 2-1 coal seam is 455.01 mm. The maximum expansion deformation of the No. 2-1 coal seam is 9.77‰; the effective pressure relief range is as long as 160 m. The similarity simulation experiment revealed that, after the completion of protective layer mining, the minimum vertical stress of the No. 2-1 coal seam is 4.0 MPa. The maximum vertical displacement of the No. 2-1 coal seam is 640 mm. The maximum expansion deformation of the No. 2-1 coal seam is 26.37‰; the effective protection range reaches 130 m. The engineering measurements demonstrated that the variation law of gas drainage parameters in the protected layer corresponds to the protected layer's vertical stress distribution law in numerical simulation and similarity simulation. With the exploitation of the composite protective layer, the protective layer’s pressure begins to release. The average gas drainage concentration is 2-3 times of that before the composite protective layer mining.


2019 ◽  
Vol 100 (2) ◽  
pp. 229-242 ◽  
Author(s):  
Niroj K. Mohalik ◽  
Debashish Mishra ◽  
Santosh K. Ray ◽  
Nikhil K. Varma ◽  
Asfar M. Khan ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document