scholarly journals Live 3D imaging and mapping of shear stresses within tissues using incompressible elastic beads

Development ◽  
2022 ◽  
Author(s):  
Alexandre Souchaud ◽  
Arthur Boutillon ◽  
Gaëlle Charron ◽  
Atef Asnacios ◽  
Camille Nous ◽  
...  
Keyword(s):  
Shear Stress ◽  
Covalent Binding ◽  
Three Dimensional ◽  
Contour Method ◽  
Shear Stresses ◽  
Liquid Droplets ◽  
Mechanical Constraints

To investigate the role of mechanical constraints in morphogenesis and development, we develop a pipeline of techniques based on incompressible elastic sensors. These techniques combine the advantages of incompressible liquid droplets, which have been used as precise in situ shear stress sensors, and of elastic compressible beads, which are easier to tune and to use. Droplets of a polydimethylsiloxane (PDMS) mix, made fluorescent through specific covalent binding to a rhodamin dye, are produced by a microfluidics device. The elastomer rigidity after polymerization is adjusted to the tissue rigidity. Its mechanical properties are carefully calibrated in situ, for a sensor embedded in a cell aggregate submitted to uniaxial compression. Thelocal shear stress tensor is retrieved from the sensor shape, accurately reconstructed through an active contour method. In vitro, within cell aggregates, and in vivo, in the prechordal plate of the Zebrafish embryo during gastrulation,our pipeline of techniques demonstrates its efficiency to directly measure the three dimensional shear stress repartition within a tissue.

scholarly journals Live 3D imaging and mapping of shear stresses within tissues using incompressible elastic beads

2021 ◽  
Author(s):  
Alexandre SOUCHAUD ◽  
Arthur BOUTILLON ◽  
Gaëlle CHARRON ◽  
Atef ASNACIOS ◽  
Camille NOÛS ◽  
...  
Keyword(s):  
Shear Stress ◽  
Covalent Binding ◽  
Three Dimensional ◽  
Contour Method ◽  
Shear Stresses ◽  
Liquid Droplets ◽  
Mechanical Constraints

To investigate the role of mechanical constraints in morphogenesis and development, we develop a pipeline of techniques based on incompressible elastic sensors. These techniques combine the advantages of incompressible liquid droplets, which have been used as precise in situ shear stress sensors, and of elastic compressible beads, which are easier to tune and to use. Droplets of a polydimethylsiloxane (PDMS) mix, made fluorescent through specific covalent binding to a rhodamin dye, are produced by a microfluidics device. The elastomer rigidity after polymerization is adjusted to the tissue rigidity. Its mechanical properties are carefully calibrated in situ, for a sensor embedded in a cell aggregate and submitted to uniaxial compression. The local shear stress tensor is retrieved from the sensor shape, accurately reconstructed through an active contour method. In vitro, within cell aggregates, and in vivo, in the prechordal plate of the Zebrafish embryo during gastrulation, our pipeline of techniques demonstrates its efficiency to directly measure the three dimensional shear stress repartition within a tissue, and its time evolution.

In vitro and in vivo polysaccharides assembly: ultrastructural and cytochemical study of growing plant cell wall components.

1978 ◽  
Vol 36 (2) ◽  
pp. 434-435
Author(s):  
D. Reis ◽  
B. Vian ◽  
J. C. Roland
Keyword(s):  
Cell Wall ◽  
Self Assembly ◽  
Plant Cell Wall ◽  
Higher Plants ◽  
Three Dimensional ◽  
Cytochemical Study ◽  
Wall Components

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.

Inflammatory Response of Endothelial Cells to Wall Shear Stress in Three Dimensional Stenotic Models

2009 ◽  
Author(s):  
Leonie Rouleau ◽  
Joanna Rossi ◽  
Jean-Claude Tardif ◽  
Rosaire Mongrain ◽  
Richard L. Leask
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Three Dimensional ◽  
Realistic Model ◽  
In Vitro Models ◽  
Steady Flows ◽  
Wall Shear

Endothelial cells (ECs) are believed to respond differentially to hemodynamic forces in the vascular tree. Once atherosclerotic plaque has formed in a vessel, the obstruction creates complex spatial gradients in wall shear stress (WSS). In vitro models have used mostly unrealistic and simplified geometries, which cannot reproduce accurately physiological conditions. The objective of this study was to expose ECs to the complex WSS pattern created by an asymmetric stenosis. Endothelial cells were grown and exposed for different times to physiological steady flows in straight dynamic controls and in idealized asymmetric stenosis models. Cell morphology was noticeably different in the regions with spatial WSS gradients, being more randomly oriented and of cobblestone shape. Inflammatory molecule expression was also altered by exposure to shear and endothelial nitric oxide synthase (eNOS) was upregulated by its presence. A regional response in terms of inflammation was observed through confocal microscopy. This work provides a more realistic model to study endothelial cell response to spatial and temporal WSS gradients that are present in vivo and is an important advancement towards a better understanding of the mechanisms involved in coronary artery disease.

Flow-induced dilation of rat soleus feed arteries

1997 ◽  
Vol 273 (5) ◽  
pp. H2423-H2427 ◽  
Author(s):  
Jeffrey L. Jasperse ◽  
M. Harold Laughlin
Keyword(s):  
Shear Stress ◽  
Maximum Flow ◽  
Intraluminal Pressure ◽  
Shear Stresses ◽  
Potential Contribution ◽  
Basal Diameter ◽  
Exercise Hyperemia ◽  
Feed Arteries

Flow-induced dilation is thought to contribute to dilation of skeletal muscle arteries and arterioles during exercise hyperemia. We sought to determine whether rat soleus feed arteries (SFA) exhibit flow-induced dilation and to evaluate the potential contribution of flow-induced dilation of SFA to exercise hyperemia. Rat SFA were isolated and cannulated to allow pressure and intraluminal flow to be independently controlled. Intraluminal pressure was maintained at 90 cmH2O throughout the experiment. All SFA ( n = 13) developed spontaneous tone and dilated in response to flow. Flow of 10 and 14 μl/min produced a 34 ± 14 and 56 ± 17 μm increase above basal diameter (135 ± 12 μm), respectively. Flows >14 μl/min produced little further dilation. Maximum flow-induced dilation was 86 ± 3% of passive diameter determined in calcium-free physiological saline solution. Calculated shear stress was maintained at 4–6 dyn/cm2 at flows of 10–20 μl/min but increased at greater flows because SFA did not dilate further. To determine whether dilation in response to flows in this range may contribute to exercise hyperemia, we estimated in vivo SFA blood flows from previously published soleus blood flow data. Anesthetized rats are estimated to have flows of 10 μl/min per SFA, and conscious rats are estimated to have flows of 95 (nonexercising), 153 (walking), and 225 (running) μl/min per SFA. Corresponding shear stresses were estimated to be 26 (anesthetized), 47 (conscious, nonexercising), 75 (walking), and 111 (running) dyn/cm2. Because estimated in vivo values for both flow and wall shear stress are far greater than the flow and/or shear stresses at which maximal flow-induced dilation occurs in vitro, we conclude that flow-induced dilation contributes little to dilation of SFA during locomotory exercise.

The Effects of Shear Stress on Endothelial Cells at Hypothermic Temperatures

2002 ◽  
Author(s):  
John H. Slater ◽  
Shailendra Jain ◽  
Robin N. Coger ◽  
Charles Y. Lee
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Endothelial Cell ◽  
Low Flow ◽  
Shear Stresses ◽  
Liver Sinusoids ◽  
Endothelial Cell Cultures ◽  
Shear Stress Response

Hypothermic machine perfusion preservation (MPP) has proven to be a successful technique for hypothermic kidney storage, however this technology has not successfully been applied to the liver. Recent research has indicated that the endothelial cells lining the liver sinusoids display rounding phenomena during MPP that is not fully understood. In order to gain a better understanding of endothelial cell shear stress response and the factors that induce rounding, a temperature-controlled micro-shear chamber has been designed and fabricated. The micro-shear chamber has been used to apply shear stresses, corresponding to those imposed during MPP, to rat liver primary endothelial cell cultures in order to form an understanding of how these stresses affect endothelial cell morphology. The chamber allows for the application of shear stresses ranging from 0.2 ± .01 dynes/cm2 to 2.3 ± 0.3 dynes/cm2, corresponding to what occurs during MPP.] Twenty-four hour in vitro experiments with shear stresses ranging from 0 to 1.49 dynes/cm2 at 4 °C were conducted in order to replicate in vivo conditions of the liver during hypothermic MPP. It has been demonstrated that endothelial cell rounding increases with increasing shear and can be prevented by utilizing low flow rates.

scholarly journals Structure of hibernating ribosomes studied by cryoelectron tomography in vitro and in situ

2010 ◽  
Vol 190 (4) ◽  
pp. 613-621 ◽  
Author(s):  
Julio O. Ortiz ◽  
Florian Brandt ◽  
Valério R.F. Matias ◽  
Lau Sennels ◽  
Juri Rappsilber ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Stress Response ◽  
Spatial Organization ◽  
Three Dimensional ◽  
E Coli ◽  
Escherichia Coli Cells ◽  
Three Dimensional Configuration

Ribosomes arranged in pairs (100S) have been related with nutritional stress response and are believed to represent a “hibernation state.” Several proteins have been identified that are associated with 100S ribosomes but their spatial organization has hitherto not been characterized. We have used cryoelectron tomography to reveal the three-dimensional configuration of 100S ribosomes isolated from starved Escherichia coli cells and we have described their mode of interaction. In situ studies with intact E. coli cells allowed us to demonstrate that 100S ribosomes do exist in vivo and represent an easily reversible state of quiescence; they readily vanish when the growth medium is replenished.

scholarly journals Three-dimensional ultrastructure of the septin filament network inSaccharomyces cerevisiae

2012 ◽  
Vol 23 (3) ◽  
pp. 423-432 ◽  
Author(s):  
Aurélie Bertin ◽  
Michael A. McMurray ◽  
Jason Pierson ◽  
Luong Thai ◽  
Kent L. McDonald ◽  
...  
Keyword(s):  
Electron Tomography ◽  
Three Dimensional ◽  
Yeast Cells ◽  
Lipid Monolayers ◽  
Morphological Description ◽  
Section Electron ◽  
Subunit Organization

Septins are conserved GTP-binding proteins involved in membrane compartmentalization and remodeling. In budding yeast, five mitotic septins localize at the bud neck, where the plasma membrane is enriched in phosphatidylinositol-4,5-bisphosphate (PtdIns4,5P2). We previously established the subunit organization within purified yeast septin complexes and how these hetero-octamers polymerize into filaments in solution and on PtdIns4,5P2-containing lipid monolayers. How septin ultrastructure in vitro relates to the septin-containing filaments observed at the neck in fixed cells by thin-section electron microscopy was unclear. A morphological description of these filaments in the crowded space of the cell is challenging, given their small cross section. To examine septin organization in situ, sections of dividing yeast cells were analyzed by electron tomography of freeze-substituted cells, as well as by cryo–electron tomography. We found networks of filaments both perpendicular and parallel to the mother–bud axis that resemble septin arrays on lipid monolayers, displaying a repeat pattern that mirrors the molecular dimensions of the corresponding septin preparations in vitro. Thus these in situ structures most likely represent septin filaments. In viable mutants lacking a single septin, in situ filaments are still present, although more disordered, consistent with other evidence that the in vivo function of septins requires filament formation.

scholarly journals Luminal Flow Actuation Generates Coupled Shear and Strain in a Microvessel-on-Chip

2021 ◽  
Author(s):  
Claire A. Dessalles ◽  
Clara Ramón-Lozano ◽  
Avin Babataheri ◽  
Abdul I. Barakat
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Fluid Pressure ◽  
Shear Stresses ◽  
Collagen Hydrogel ◽  
Luminal Flow ◽  
Wall Shear ◽  
On Chip

AbstractIn the microvasculature, blood flow-derived forces are key regulators of vascular structure and function. Consequently, the development of hydrogel-based microvessel-on-chip systems that strive to mimic the in vivo cellular organization and mechanical environment has received great attention in recent years. However, despite intensive efforts, current microvessel- on-chip systems suffer from several limitations, most notably failure to produce physiologically relevant wall strain levels. In this study, a novel microvessel-on-chip based on the templating technique and using luminal flow actuation to generate physiologically relevant levels of wall shear stress and circumferential stretch is presented. Normal forces induced by the luminal pressure compress the surrounding soft collagen hydrogel, dilate the channel, and create large circumferential strain. The fluid pressure gradient in the system drives flow forward and generates realistic pulsatile wall shear stresses. Rigorous characterization of the system reveals the crucial role played by the poroelastic behavior of the hydrogel in determining the magnitudes of the wall shear stress and strain. The experimental measurements are combined with an analytical model of flow in both the lumen and the porous hydrogel to provide an exceptionally versatile user manual for an application-based choice of parameters in microvessels-on-chip. This unique strategy of flow actuation adds a dimension to the capabilities of microvessel-on-chip systems and provides a more general framework for improving hydrogel-based in vitro engineered platforms.Abstract Figure

Octacalcium Phosphate as a Precursor in Biomineral Formation

1987 ◽  
Vol 1 (2) ◽  
pp. 306-313 ◽  
Author(s):  
W.E. Brown ◽  
N. Eidelman ◽  
B. Tomazic
Keyword(s):  
Thermogravimetric Analysis ◽  
Calcium Phosphates ◽  
Three Dimensional ◽  
Octacalcium Phosphate ◽  
Basic Form ◽  
Vacancy Defects ◽  
Impurity Ions

What are biominerals and how are they formed? It is usually assumed: (i) that the prototype for most apatitic biominerals is hydroxyapatite (OHAp), Ca5(PO4) 3OH; and (ii) that the OHAp structure has been modified by the presence of impurity ions and vacancy defects in specific OHAp lattice sites. The usual answer, at least implicitly, to the second question is that the apatitic mineral is formed directly by the precipitation of ions from the surrounding solution. Our answers are: (i) that apatitic biominerals are formed through a precursor mechanism in which octacalcium phosphate (OCP), Ca8H 2(PO4)6·5H2O, precipitates first and then hydrolyzes ireversibly in situ to a transition product intermediate to OCP and OHAp; and (ii) that this product, "octacalcium phosphate hydrolyzate" (OCPH), may contain (a) OHAp-like and OCP-like domains in varying amounts, (b) vacancy defects and impurity ions in lattice sites in these domains, and (c) various kinds of one-, two-, and three-dimensional defects which are not present in either the OHAp or the OCP lattice, these defects being formed during the in situ hydrolysis step. A calcification model of this type was first proposed in 1957, but full acceptance was delayed because most of the evidence was circumstantial and in vitro in nature. The situation has changed radically because of three unrelated studies that are in vivo in nature but lead to the same conclusion: I. 32P-pyrolysis studies of rat enamel: The results clearly demonstrated that an acidic calcium phosphate precursor was involved. II. Precipitation of calcium phosphates in serum. Ultrafiltered serum was equilibrated with brushite. Subsequent changes in the ionic concentrations revealed that OCP was formed at first and then hydrolyzed to a more basic form, OCPH, but never reached the solubility of OHAp. III. Physicochemical properties of cardiovascular biominerals: We recently characterized biominerals in cardiovascular deposits in an encompassing variety of ways. As an overall conclusion, OCPH was the prototype most compatible with the data [including indices of refraction, solubility, P2O74- formation on pyrolysis, thermogravimetric analysis (TGA) measurements, presence of water, and incorporation of CO32-, Na+, and Mg2+]. This calcification model has important consequences relative to all kinds of calcification and decalcification processes, including those of enamel.

Sign in / Sign up

Export Citation Format

Share Document