In situFluorescence Observation of the Vacuum Deposition Process of Cyanooctyloxybiphenyl. Fluorescence Behavior Related to Structural Transformation during Deposition

1995 ◽  
Vol 24 (4) ◽  
pp. 247-248
Author(s):  
Keizo Watanabe ◽  
Yuji Orihashi ◽  
Hiroshi Miyasaka ◽  
Akira Itaya
Keyword(s):  
Structural Transformation ◽  
Deposition Process ◽  
Vacuum Deposition

Monte-Carlo simulation study of the vacuum deposition process

1992 ◽  
Vol 60-61 ◽  
pp. 653-659 ◽  
Author(s):  
Yasushi Sasajina ◽  
Tatsuyuki Tsukida ◽  
Satoru Ozawa ◽  
Ryoichi Yamamoto
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Simulation Study ◽  
Deposition Process ◽  
Vacuum Deposition ◽  
Monte Carlo Simulation Study

P-106: Numerical Analysis of Evaporated Film Thickness in Vacuum Deposition Process for Small Molecule OLED

2002 ◽  
Vol 33 (1) ◽  
pp. 631
Author(s):  
Choong-Ho Lee ◽  
Sung-Chul Kim ◽  
Dong-Myong Suh ◽  
Kyeong-Beom Cheong
Keyword(s):  
Numerical Analysis ◽  
Film Thickness ◽  
Small Molecule ◽  
Deposition Process ◽  
Vacuum Deposition

scholarly journals Prototype of a Textronic Sensor Created with a Physical Vacuum Deposition Process for Staphylococcus aureus Detection

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 183
Author(s):  
Ewa Korzeniewska ◽  
Artur Szczęsny ◽  
Piotr Lipiński ◽  
Tomasz Dróżdż ◽  
Paweł Kiełbasa ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Deposition Process ◽  
Physical Vacuum ◽  
Vacuum Deposition ◽  
Electrical Parameters ◽  
Bacterial Cultures ◽  
Measurement Signal

Staphylococcus aureus is a bacterium which people have been in contact with for thousands of years. Its presence often leads to severe disorders of the respiratory and circulatory systems. The authors of this article present a prototype of a textronic sensor enabling the detection of this bacterium. This sensor was created using a process of physical vacuum deposition on a flexible textile substrate which can be implemented on clothing. With increasing numbers of bacterial colonies, changes in the sensor’s electrical parameters were observed. The sensor’s resistance reduced by 50% and the capacitance more than doubled within the first two days of starting bacterial cultures. Extensive changes in electrical parameters were observed at 100 Hz and 120 Hz of the measurement signal.

In situ observation of vacuum deposition process of 10-(1-pyrenyl) decanoic acid by fluorescence measurement

1991 ◽  
Vol 197 (1-2) ◽  
pp. 357-365 ◽  
Author(s):  
Akira Itaya ◽  
Satoru Takada ◽  
Hiroshi Masuhara ◽  
Yoshio Taniguchi
Keyword(s):  
Deposition Process ◽  
Decanoic Acid ◽  
In Situ Observation ◽  
Fluorescence Measurement ◽  
Vacuum Deposition

X-Ray Diffraction Investigation of Vacuum-Deposited Metallic Films

1960 ◽  
Vol 4 ◽  
pp. 63-73
Author(s):  
Otto Renius
Keyword(s):  
Heat Treatment ◽  
Base Material ◽  
Deposition Process ◽  
Film Structure ◽  
Vacuum Deposition ◽  
Metallic Films ◽  
X Ray Diffraction ◽  
X Ray ◽  
Film Adhesion ◽  
Material Orientation

AbstractIn the course of work on the vacuum deposition of metallic films, a series of X-ray diffraction investigations was run on the effects of base material orientation, heat treatment, and angle of deposition, on the structure of the deposed films. Results show that the film structure can be altered by changing several parameters during and after the deposition process. An attempt is made to correlate this structure with film adhesion and protective characteristics.

scholarly journals Pyrolysis and Deposition Mechanism of Poly(vinylidene fluoride) in Vacuum Deposition Process.

1991 ◽  
Vol 48 (7) ◽  
pp. 399-404 ◽  
Author(s):  
Akiyoshi TAKENO ◽  
Norimasa OKUI ◽  
Toshimitsu HIRUMA ◽  
Tetsuji KITOH ◽  
Michiharu MURAOKA ◽  
...  
Keyword(s):  
Vinylidene Fluoride ◽  
Deposition Process ◽  
Vacuum Deposition ◽  
Deposition Mechanism ◽  
Poly Vinylidene Fluoride
Sign in / Sign up

Export Citation Format

Share Document