scholarly journals Characteristics of Dispersion of Viscous Liquid in an Agitated Vessel

1974 ◽  
Vol 38 (3) ◽  
pp. 244-249 ◽  
Author(s):  
Kensaku Mizoguchi ◽  
Eiji O'Shima ◽  
Hakuai Inoue
2017 ◽  
Vol 4 (1) ◽  
pp. 1-6
Author(s):  
Haruki Furukawa ◽  
◽  
Kento Matsumoto ◽  
Yoshihito Kato ◽  
Masataka Kamiya ◽  
...  

Author(s):  
A. C. Faberge

Benzylamine tartrate (m.p. 63°C) seems to be a better and more convenient substrate for making carbon films than any of those previously proposed. Using it in the manner described, it is easy consistently to make batches of specimen grids as open as 200 mesh with no broken squares, and without individual handling of the grids. Benzylamine tartrate (hereafter called B.T.) is a viscous liquid when molten, which sets to a glass. Unlike polymeric substrates it does not swell before dissolving; such swelling of the substrate seems to be a principal cause of breakage of carbon film. Mass spectroscopic examination indicates a vapor pressure less than 10−9 Torr at room temperature.


2015 ◽  
Vol 25 (9) ◽  
pp. 795-817 ◽  
Author(s):  
Mika P. Jarvinen ◽  
A. E. P. Kankkunen ◽  
R. Virtanen ◽  
P. H. Miikkulainen ◽  
V. P. Heikkila

1998 ◽  
Vol 8 (2) ◽  
pp. 155-178 ◽  
Author(s):  
J. H. Hilbing ◽  
Stephen D. Heister

2010 ◽  
Vol 7 ◽  
pp. 129-142
Author(s):  
M.A. Ilgamov ◽  
A.G. Khakimov

The article investigates the reflection of a longitudinal damped travelling wave from the transverse notch and its movement along an infinite rod plunged into viscous liquid. The simplest model for the stress deformed state in the notch zone is applied. The solution is found to depend on the parameters of the liquid and damping characteristics in the material of the rod and the surrounding liquid. The solution to the inverse problem makes it possible to define the coordinate of the notch and the parameter that contains its depth and length using data on both the incident and reflected waves at the observation point.


1981 ◽  
Vol 46 (9) ◽  
pp. 2021-2031 ◽  
Author(s):  
Pavel Seichter

Velocity profiles and pumping capacity have been determined using a thermistor anemometer in a vessel equipped with a screw impeller. In region of the creeping flow of a Newtonian liquid, i.e. for Re <15, the dimensionless pumping capacity is dependent on the geometrical arrangement of the mixing system. The efficiency was assessed of individual configuration from the value energy criterion expressing the dimensionless power requirements for recirculation of a highly viscous liquid in a vessel equipped with a screw impeller.


1991 ◽  
Vol 56 (9) ◽  
pp. 1856-1867 ◽  
Author(s):  
Zdzisław Jaworski ◽  
Ivan Fořt

Mechanical energy dissipation was investigated in a cylindrical, flat bottomed vessel with four radial baffles and the pitched blade turbine impeller of varied size. This study was based upon the experimental data on the hydrodynamics of the turbulent flow of water in an agitated vessel. They were gained by means of the three-holes Pitot tube technique for three impeller-to-vessel diameter ratio d/D = 1/3, 1/4 and 1/5. The experimental results obtained for two levels below and two levels above the impeller were used in the present study. Radial profiles of the mean velocity components, static and total pressures were presented for one of the levels. Local contribution to the axial transport of the agitated charge and energy was presented. Using the assumption of the axial symmetry of the flow field the volumetric flow rates were determined for the four horizontal cross-sections. Regions of positive and negative values of the total pressure of the liquid were indicated. Energy dissipation rates in various regions of the agitated vessel were estimated in the range from 0.2 to 6.0 of the average value for the whole vessel. Hydraulic impeller efficiency amounting to about 68% was obtained. The mechanical energy transferred by the impellers is dissipated in the following ways: 54% in the space below the impeller, 32% in the impeller region, 14% in the remaining part of the agitated liquid.


Sign in / Sign up

Export Citation Format

Share Document