scholarly journals Nanofluid Flow over a Rotating Disk with Prescribed Heat Flux

2012 ◽  
Vol 11 (3) ◽  
pp. 77-92
Author(s):  
Julie Andrews ◽  
S P Anjali Devi
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Friction Coefficient ◽  
Differential Equations ◽  
Prandtl Number ◽  
Skin Friction ◽  
Rotating Disk ◽  
Skin Friction Coefficient ◽  
Copper Water ◽  
Flow And Heat Transfer

An analysis is carried out to study the problem of the steady flow and heat transfer over a rotating disk with a prescribed heat flux in nanofluid. Nanofluid considered is Copper (Cu) with water as the base fluid. The governing partial differential equations are transformed into a set of nonlinear ordinary differential equations using similarity transformation, which are then solved using the Nachtsheim-Swigert Shooting iteration technique along with the fourth order Runga Kutta method. The features of the flow and heat transfer characteristics are analyzed and discussed. The radial velocity, tangential velocity and the axial velocity for copper-water nanofluid are calculated and are represented graphically. Numerical results for dimensionless temperature, the radial skin friction coefficient and the tangential skin friction coefficient of the nanofluid flows are obtained and computations are carried out for the various values of Prandtl number. It is found that for the prescribed heat flux case (PHF case), the effect of Prandtl number is to reduce the temperature as it increases for copper-water nanofluid.

scholarly journals Magnetohydrodynamic Flow and Heat Transfer Over an Exponentially Stretching/Shrinking Sheet in Ferrofluids

2021 ◽  
Vol 29 (3) ◽  
Author(s):  
Nurfazila Rasli ◽  
Norshafira Ramli
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Differential Equations ◽  
Skin Friction ◽  
Skin Friction Coefficient ◽  
Magnetohydrodynamic Flow ◽  
Shrinking Sheet ◽  
Flow And Heat Transfer ◽  
Exponentially Stretching

In this research, the problem of magnetohydrodynamic flow and heat transfer over an exponentially stretching/shrinking sheet in ferrofluids is presented. The governing partial differential equations are transformed into nonlinear ordinary differential equations by applying suitable similarity transformations. These equations are then solved numerically using the shooting method for some pertinent parameters. For this research, the water-based ferrofluid is considered with three types of ferroparticles: magnetite, cobalt ferrite, and manganese-zinc ferrite. The numerical solutions on the skin friction coefficient, Nusselt number, velocity and temperature profiles influenced by the magnetic parameter, wall mass transfer parameter, stretching/shrinking parameter, and volume fraction of solid ferroparticle are graphically displayed and discussed in more details. The existences of dual solutions are noticeable for the stretching/shrinking case in a specific range of limit. For the first solution, an increasing number in magnetic and suction will also give an increment of skin friction coefficient and Nusselt number over stretching/shrinking sheet. For the skin friction coefficient only, it is showed a decreasing pattern after the intersection. Besides, the presence of ferroparticles in the fluids causes a high number of the fluid’s thermal conductivity and heat transfer rate.

scholarly journals Magnetohydrodynamic Flow and Heat Transfer Induced by a Shrinking Sheet

Mathematics ◽  
2020 ◽  
Vol 8 (7) ◽  
pp. 1175
Author(s):  
Nor Ain Azeany Mohd Nasir ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Differential Equations ◽  
Prandtl Number ◽  
Heat Generation ◽  
Local Nusselt Number ◽  
Magnetic Parameter ◽  
Skin Friction Coefficient ◽  
Shrinking Sheet ◽  
Flow And Heat Transfer

The magnetohydrodynamic (MHD) stagnation point flow over a shrinking or stretching flat sheet is investigated. The governing partial differential equations (PDEs) are reduced into a set of ordinary differential equations (ODEs) by a similarity transformation and are solved numerically with the help of MATLAB software. The numerical results obtained are for different values of the magnetic parameter M, heat generation parameter Q, Prandtl number Pr and reciprocal of magnetic Prandtl number ε. The influences of these parameters on the flow and heat transfer characteristics are investigated and shown in tables and graphs. Two solutions are found for a certain rate of the shrinking strength. The stability of the solutions in the long run is determined, and shows that only one of them is stable. It is found that the skin friction coefficient f ″ ( 0 ) and the local Nusselt number − θ ′ ( 0 ) decrease as the magnetic parameter M increases. Further, the local Nusselt number increases as the heat generation increases.

Hybrid nanofluid flow and heat transfer over a nonlinear permeable stretching/shrinking surface

2019 ◽  
Vol 29 (9) ◽  
pp. 3110-3127 ◽  
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Local Nusselt Number ◽  
Skin Friction Coefficient ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

PurposeThis paper aims to investigate the steady flow and heat transfer of a Cu-Al2O3/water hybrid nanofluid over a nonlinear permeable stretching/shrinking surface with radiation effects. The surface velocity condition is assumed to be of the power-law form with an exponent of 1/3. The governing equations of the problem are converted into a system of similarity equations by using a similarity transformation.Design/methodology/approachThe problem is solved numerically using the boundary value problem solver (bvp4c) in Matlab software. The results of the skin friction coefficient and the local Nusselt number as well as the velocity and temperature profiles are presented through graphs and tables for several values of the parameters. The effects of these parameters on the flow and heat transfer characteristics are examined and discussed.FindingsResults found that dual solutions exist for a certain range of the stretching/shrinking and suction parameters. The increment of the skin friction coefficient and reduction of the local Nusselt number on the shrinking sheet is observed with the increasing of copper (Cu) nanoparticle volume fractions for the upper branch. The skin friction coefficient and the local Nusselt number increase when suction parameter is increased for the upper branch. Meanwhile, the temperature increases in the presence of the radiation parameter for both branches.Originality/valueThe problem of Cu-Al2O3/water hybrid nanofluid flow and heat transfer over a nonlinear permeable stretching/shrinking surface with radiation effects is the important originality of the present study where the dual solutions for the flow reversals are obtained.

scholarly journals Stagnation-point flow past a shrinking sheet in a nanofluid

Open Physics ◽  
2011 ◽  
Vol 9 (5) ◽  
Author(s):  
Roslinda Nazar ◽  
Mihaela Jaradat ◽  
Norihan Arifin ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Nonlinear System ◽  
Differential Equations ◽  
Skin Friction ◽  
Stagnation Point ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Stagnation Point Flow ◽  
Shrinking Sheet

AbstractIn this paper, the stagnation-point flow and heat transfer towards a shrinking sheet in a nanofluid is considered. The nonlinear system of coupled partial differential equations was transformed and reduced to a nonlinear system of coupled ordinary differential equations, which was solved numerically using the shooting method. Numerical results were obtained for the skin friction coefficient, the local Nusselt number as well as the velocity and temperature profiles for some values of the governing parameters, namely the nanoparticle volume fraction φ, the shrinking parameter λand the Prandtl number Pr. Three different types of nanoparticles are considered, namely Cu, Al2O3 and TiO2. It was found that nanoparticles of low thermal conductivity, TiO2, have better enhancement on heat transfer compared to nanoparticles Al2O3 and Cu. For a particular nanoparticle, increasing the volume fraction φ results in an increase of the skin friction coefficient and the heat transfer rate at the surface. It is also found that solutions do not exist for larger shrinking rates and dual solutions exist when λ < −1.0.

Flow and Heat Transfer Over a Stretched Microsurface

2009 ◽  
Vol 131 (6) ◽  
Author(s):  
Suhil Kiwan ◽  
M. A. Al-Nimr
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Flat Plate ◽  
Skin Friction ◽  
Convection Heat Transfer ◽  
Skin Friction Coefficient ◽  
Slip Parameter ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

The convection heat transfer induced by a stretching flat plate has been studied. Similarity conditions are obtained for the boundary layer equations for a flat plate subjected to a power law temperature and velocity variations. It is found that a similarity solution exists only for a linearly stretching plate and only when the plate is isothermal. The analysis shows that three parameters control the flow and heat transfer characteristics of the problem. These parameters are the velocity slip parameter K1, the temperature slip parameter K2, and the Prandtl number. The effect of these parameters on the flow and heat transfer of the problem has been studied and presented. It is found that the slip velocity parameter affect both the flow and heat transfer characteristics of the problem. It is found that the skin friction coefficient decreases with increasing K1 and most of the changes in the skin friction takes place in the range 0<K1<1. A correlation between the skin friction coefficient and K1 and Rex has been found and presented. It is found that cf=23Rex−0.5(K1+0.64)−0.884 for 0<K1<10 with an error of ±0.8%. Other correlations between Nu and K1 and K2 has been found and presented in Eq. 28.

scholarly journals Flow and heat transfer in a rectangular converging (diverging) channel: new formulation

2021 ◽  
Vol 29 (1) ◽  
Author(s):  
Roohi Laila ◽  
Dil Nawaz Khan Marwat ◽  
Azhar Ali
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Model Problem ◽  
Skin Friction Coefficient ◽  
Governing Equations ◽  
Flow And Heat Transfer ◽  
Controlling Parameter ◽  
Diverging Channel ◽  
New Formulation

AbstractIn this paper, a model problem of viscous flow and heat transfer in a rectangular converging (diverging) channel has been investigated. The governing equations are presented in Cartesian Coordinates and consequently they are simplified and solved with perturbation and numerical methods. Initially, symmetrical solutions of the boundary value problem are found for the upper half of the channel. Later on, these solutions are extended to the lower half and then to the whole channel. The numerical and perturbation solutions are compared and exactly matched with each other for a small value of the parameters involved in the problem. It is also confirmed that the solutions for the converging/diverging channel are independent of the sign of m (the slope). Moreover, the skin friction coefficient and heat transfer at the upper wall are calculated and graphed against the existing parameters in different figures. It is observed that the heat transfer at walls is decreased (increased) with increasing $${c}_{1}$$ c 1 (thermal controlling parameter) for diverging (converging). It is also decreased against Pr (Prandtle number). For $${c}_{1}=0$$ c 1 = 0 , the temperature profiles may be exactly determined from the governing equations and the rate of heat transfer at the upper wall is $$\theta^{\prime } (1) = \frac{m}{{(1 + m^{2} )\tan^{ - 1} m}}$$ θ ′ ( 1 ) = m ( 1 + m 2 ) tan - 1 m . It is confirmed that the skin friction coefficient behaves linearly against Re* (modified Reynolds number) and it is increased with increasing of Re* (changed from negative to positive). Moreover, it is increased asymptotically against m and converges to a constant value i.e. zero.

scholarly journals Thermo-micropolar fluid flow along a vertical permeable plate with uniform surface heat flux in the presence of heat generation

2009 ◽  
Vol 13 (1) ◽  
pp. 23-36 ◽  
Author(s):  
Mohammad Rahman ◽  
Ibrahim Eltayeb ◽  
Mohammad Rahman
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Heat Generation ◽  
Surface Heat Flux ◽  
Micropolar Fluid ◽  
Skin Friction Coefficient ◽  
Surface Heat ◽  
Viscous Drag

A two-dimensional steady convective flow of thermo-micropolar fluid past a vertical permeable flat plate in the presence of heat generation with uniform surface heat flux has been analyzed numerically. The local similarity solutions for the flow, microrotation (angular velocity) and heat transfer characteristics are illustrated graphically for various material parameters entering into the problem. The effects of the pertinent parameters on the local skin friction coefficient, plate couple stress, and the rate of heat transfer are also calculated and displayed graphically. The results show that skin friction coefficient (viscous drag) and the rate of heat transfer (Nusselt number) in micropolar fluid are less compared to that of the Newtonian fluid.

Investigation Into the Similarity Solution for Boundary Layer Flows in Microsystems

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Suhil Kiwan ◽  
M. A. Al-Nimr
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Temperature Jump ◽  
Velocity Slip ◽  
Skin Friction Coefficient ◽  
Heat Transfer Characteristics ◽  
Boundary Layer Flows ◽  
Flow And Heat Transfer

An investigation toward the existence of a complete similarity solution for boundary layer flows under the velocity slip and temperature jump conditions is carried out. The study is limited to the boundary layer flows resulting from an arbitrary freestream velocity U(x)=Uoxm and wall temperature given by Tw−T∞=Cxn. It is found that a similar solution exists only for m=1 and n=0, which represents stagnation flow on isothermal surface. This case has been thoroughly investigated. The analysis showed that three parameters control the flow and heat transfer characteristics of the problem. These parameters are the velocity slip parameter K1, the temperature jump parameter K2, and Prandtl number. The effect of these parameters on the flow and heat transfer of the problem has been studied and presented. It is found that the slip velocity parameter affects both the flow and heat transfer characteristics of the problem. It is found that the skin friction coefficient decreases with increasing K1 and most of changes in the skin friction takes place in the range 0<K1<1. The skin friction coefficient is found to be related to K1 and Rex according to the relation: Cf=3.38Rex−0.5(K1+1.279)−0.8 for 0<K1<5 with an error of ±4%. On the other hand, the correlation between Nu, K1, K2, and Pr has been found by the equation Nu=[(0.449+1.142K11.06)∕(0.515+K11.06)](K2+1.489Pr−0.44)−1, for 0<K1, K2<5, 0.7≤Pr≤5 within a maximum error of ±3%.

scholarly journals Unsteady MHD Mixed Convection Flow in Hybrid Nanofluid at Three-Dimensional Stagnation Point

Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 549
Author(s):  
Nurul Amira Zainal ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Differential Equations ◽  
Mixed Convection ◽  
Skin Friction ◽  
Stagnation Point ◽  
Three Dimensional ◽  
Skin Friction Coefficient ◽  
Stagnation Point Flow ◽  
Hybrid Nanofluid

There has been significant interest in exploring a stagnation point flow due to its numerous potential uses in engineering applications such as cooling of nuclear reactors. Hence, this study proposed a numerical analysis on the unsteady magnetohydrodynamic (MHD) mixed convection at three-dimensional stagnation point flow in Al2O3–Cu/H2O hybrid nanofluid over a permeable sheet. The ordinary differential equations are accomplished by simplifying the governing partial differential equations through suitable similarity transformation. The numerical computation is established by the MATLAB system software using the bvp4c technique. The bvp4c procedure is excellent in providing more than one solution once sufficient predictions are visible. The influence of certain functioning parameters is inspected, and notable results exposed that the rate of heat transfer is exaggerated along with the skin friction coefficient while the suction/injection and magnetic parameters are intensified. The results also signified that the rise in the volume fraction of the nanoparticle and the decline of the unsteadiness parameter demonstrates a downward attribution towards the heat transfer performance and skin friction coefficient. Conclusively, the observations are confirmed to have multiple solutions, which eventually contribute to an investigation of the analysis of the solution stability, thereby justifying the viability of the first solution.

Flow and Heat Transfer in a Newtonian Nanoliquid due to a Curved Stretching Sheet

2017 ◽  
Vol 72 (9) ◽  
pp. 833-842 ◽  
Author(s):  
Pradeep Ganapathi Siddheshwar ◽  
Meenakshi Nerolu ◽  
Igor Pažanin
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Differential Equations ◽  
Skin Friction ◽  
Stretching Sheet ◽  
Volume Fraction ◽  
Nonlinear Partial Differential Equations ◽  
Skin Friction Coefficient ◽  
Variable Coefficients

AbstractFlow of a Newtonian nanoliquid due to a curved stretching sheet and heat transfer in it is studied. The governing nonlinear partial differential equations are reduced to nonlinear ordinary differential equations with variable coefficients by using a similarity transformation. The flow characteristics are studied using plots of flow velocity components and the skin-friction coefficient as a function of suction-injection parameter, curvature, and volume fraction. Prescribed surface temperature and prescribed surface heat flux are considered for studying the temperature distribution in the flow. The thermophysical properties of 20 nanoliquids are considered in the investigation by modeling them through the use of phenomenological laws and mixture theory. The results of the corresponding problem involving a plane stretching sheet is obtained as a particular case of those obtained in the present paper. Skin friction coefficient and Nusselt number are evaluated and it is observed that skin friction coefficient decreases with concentration of nanoparticles in the absence as well as presence of suction where as Nusselt number increases with increase in concentration of nanoparticles in a dilute range.

Sign in / Sign up

Export Citation Format

Share Document