scholarly journals Effect of Friction Stir Processing Process Parameters on the Mechanical Properties of AZ31B Mg Alloy

2014 ◽  
Vol 13 (1-2) ◽  
Author(s):  
Ganta Venkateswarlu ◽  
M Joseph Davidson ◽  
Pulla Sammaiah
Keyword(s):  
Mechanical Properties ◽  
Process Parameters ◽  
Friction Stir Processing ◽  
Mg Alloy ◽  
Friction Stir

scholarly journals Fabrication of AA7075 Hybrid Green Metal Matrix Composites by Friction Stir Processing Technique

2020 ◽  
Vol 44 (4) ◽  
pp. 295-300
Author(s):  
Sanjay Kumar ◽  
Ashish Kumar Srivastava ◽  
Rakesh Kumar Singh
Keyword(s):  
Mechanical Properties ◽  
Process Parameters ◽  
Friction Stir Processing ◽  
Research Work ◽  
Processing Technique ◽  
Matrix Composites ◽  
Avant Garde ◽  
Friction Stir ◽  
Surface Composites ◽  
Tool Tilt Angle

Friction stir processing is an avant-garde technique of producing new surface composite or changing the different properties of a material through intense, solid-state localized material plastic deformation. This change in properties depends upon the deformation formed by inserting a non-consumable revolving tool into the workpiece and travels laterally through the workpiece. This research work highlights the effect of process parameters on mechanical properties of fabricated surface composites by friction stir processing. By using various reinforcing materials like Ti, SiC, B4C, Al2O3 with waste elements like waste eggshells, rice husks, coconut shell and coir will be used to fabricate the green composites which are environmentally friendly and reduces the problem of decomposition. The parameter for this experiment is considered as the reinforcing materials, tool rotation speed and tool tilt angle. The SiC/Al2O3/Ti along with eggshell are selected asreinforcement materials. The main effect of the reinforcement is to improve mechanical properties, like hardness, impact strength and strength. The results revealed that the process parameters significantly affect the mechanical properties of friction stir processed surface composites.

Fabrication and characterization of friction stir processed Al 6061 reinforced with TiB2-Al2O3

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ch. Mohana Rao ◽  
K. Mallikarjuna Rao
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Process Parameters ◽  
Friction Stir Processing ◽  
Practical Implication ◽  
Research Work ◽  
Influence Of Process Parameters ◽  
Volume Percentage ◽  
Content Type ◽  
Friction Stir

PurposeThe objective of the paper is to evaluate the fabrication process and to study the influence of process parameters of friction stir processing of 6061-TiB2-Al2O3 Aluminum alloy surface composite on microhardness tensile strength, and microstructure.Design/methodology/approachFriction stir processing method is used for attaining the desired mechanical properties, and selectively processed reinforcements to fabricate the samples. The Taguchi technique was used to optimize rotational speed, travel speed and volume percentage of reinforcement particles to enhance the mechanical properties of 6061-TiB2-Al2O3 Aluminum alloy composite.FindingsThe fabrication of surface composites through FSP allows new inventions in terms of material with enhanced surface layers without changing the base metal.Practical implicationsTo examine the behavior of the surface of the composites in the different zones, the practical implication consists of the use of different characterization techniques like optical microscopy and scanning microscopy for microstructural behavior and the measurement of hardness and tensile tests for mechanical behavior.Originality/valueThe research work consists of tool design and process parameters, which can affect the final product (microstructural changes), and the performance of the modified surface layer behavior was studied and presented.

scholarly journals Surface modification of Aluminium alloy (7xxx series) by multipass friction stir processing

2021 ◽  
Vol 6 (2) ◽  
pp. 008-017
Author(s):  
P K Mandal
Keyword(s):  
Mechanical Properties ◽  
Surface Modification ◽  
Process Parameters ◽  
Friction Stir Processing ◽  
Rotational Speed ◽  
Aluminium Alloys ◽  
Research Work ◽  
Dendritic Structure ◽  
Similar Process ◽  
Friction Stir

Multipass friction stir processing (MP-FSP) is a solid-state surface modification technique, which was developed based on the simple principle of FSW. Aluminium plates were subjected to MP-FSP from 1 to 14 passes along the longitudinal direction with the specified process parameters such as rotational speed of 1000 rpm and travel speed of 70 mm/min and axial force of 15 kN. Subsequently, similar process parameters had followed by doublepass friction stir processing (DP-FSP) in order to help determine the effectiveness of multipass in creating high strength of aluminium alloys. Now-a-days extensive research had focused on various process parameters such as rotational speed, traverse speed, tool design on processing of aluminium alloys and proficiently enhanced material properties. This technique has considered mostly development of green technology, which is energy efficient and environment friendly technique. Experimentally proven that the Al-Zn-Mg-Sc alloys are characterized through OM, FESEM, DSC, SEM, TEM, and mechanical properties. The tensile strength and ductility of the MP-FSP specimen improved significantly to 122.48%, and 42.55% respectively, but hardness decline to 4.84% as compared to DP-FSP. This is due to not only for refinement of cast dendritic structure and eliminate segregation in the as-cast alloy, but also to the refining of grains, such as the uniform distribution of Al3Sc and hardening precipitates. To aim of this research work is to mainly focusing on MP-FSP may enhance mechanical properties better than DP-FSP and useful for macroscale applications.

scholarly journals Mg/ZrO2 Metal Matrix Nanocomposites Fabricated by Friction Stir Processing: Microstructure, Mechanical Properties, and Corrosion Behavior

2021 ◽  
Vol 9 ◽  
Author(s):  
Ke Qiao ◽  
Ting Zhang ◽  
Kuaishe Wang ◽  
Shengnan Yuan ◽  
Shengyi Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electron Microscope ◽  
Grain Refinement ◽  
Friction Stir Processing ◽  
Biological Properties ◽  
Mg Alloy ◽  
Corrosion Properties ◽  
Metal Matrix Nanocomposites ◽  
Friction Stir ◽  
Average Grain Size

Magnesium (Mg) and its alloys have attached more and more attention because of their potential as a new type of biodegradable metal materials. In this work, AZ31/ZrO2 nanocomposites with good uniformity were prepared successfully by friction stir processing (FSP). The scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to characterize the microstructure of the composites. The mechanical properties, electrochemical corrosion properties and biological properties were evaluated. In addition, the effect of reinforced particles (ZrO2) on the microstructure and properties of the composite was studied comparing with FSP AZ31 Mg alloy. The results show that compared with the base metal (BM), the AZ31/ZrO2 composite material achieves homogenization, densification, and grain refinement after FSP. The combination of dynamic recrystallization and ZrO2 particles leads to grain refinement of Mg alloy, and the average grain size of AZ31/ZrO2 composites is 3.2 μm. After FSP, the c-axis of grain is deflected under the compression stress of shoulder and the shear stress of pin. The ultimate tensile strength (UTS) and yield strength (YS) of BM were 283 and 137 MPa, respectively, the UTS and YS of AZ31/ZrO2 composites were 427 and 217 MPa, respectively. The grain refinement and Orowan strengthening are the major strengthening mechanisms. Moreover, the corrosion resistance in simulated body fluid of Mg alloy is improved by grain refinement and the barrier effect of ZrO2.

scholarly journals Experimental Identification of Optimized Process Parameters for FSW of AZ91C Mg Alloy Using Quadratic Regression Models

2020 ◽  
Vol 66 (12) ◽  
pp. 736-751
Author(s):  
Satheesh C ◽  
Sevvel P ◽  
Senthil Kumar R
Keyword(s):  
Mechanical Properties ◽  
Response Surface ◽  
Process Parameters ◽  
Regression Models ◽  
Mg Alloy ◽  
Regression Equations ◽  
Quadratic Regression ◽  
Input Process ◽  
Friction Stir ◽  
Pin Geometry

This experimental work aims to devise and establish quadratic regression equations, including various input criteria of a friction stir welding (FSW) technique to predict and determine the responses during the fabrication of AZ91C Mg alloy joints. The input process parameters taken into consideration include the traversing speed of the tool, the speed of rotation of the tool, its pin profile (geometry) and the axial force. A five-level, 4 four-factor composite design (of central nature) was applied, and response surface methodology (RSM) was used to formulate quadratic regression models, to develop 3D response surface charts, and to anticipate the responses for various mechanical properties. The generated quadratic mathematical model was tested and validated using the technique of analysis of variance. Validation experimental trial results outlined in the form of scatter diagrams revealed precedented coincidence with that of the generated models. The AZ91C Mg alloy joints obtained using the tool having taper cylindrical pin geometry employed at 1045 rpm, 1.5 mm/s traversing speed, under the exertion of an axial load of 4.87 kN was found to exhibit improved mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document