scholarly journals Effect of Calcium Sulfate Whisker on the Mechanical Properties of PVC

Author(s):  
Wei LI ◽  
Shu-lin YE ◽  
Rui HUA ◽  
Kai-yuan CHEN
2014 ◽  
Vol 638-640 ◽  
pp. 1322-1325 ◽  
Author(s):  
Chang Chen ◽  
Yu Bin Wang ◽  
Hua Wang ◽  
Qian Qian Deng ◽  
Lei Du ◽  
...  

Different kinds of hemihydrate calcium sulfate whiskers were fabricated by calcination method under the condition of 115-600 °C. And the density, moisture rate and mechanical properties of composites of gypsum and whisker were studied. The specific strength of composites was investigated. The results show that gypsum boards with whisker calcined at 115 °C and 300 °C have the maximum and minimum densities, which are about 1658 kg/m3 and 1604 kg/m3, respectively. Hydration ability of anhydrous calcium sulfate whisker is the strongest. The values of specific strength of gypsum board reinforced by different types of whiskers suggested that the porosity of the composites changed with the different kinds of whiskers, which agreed well with the moisture rate and mechanical properties.


2022 ◽  
Vol 2160 (1) ◽  
pp. 012004
Author(s):  
Runmeng Qiao ◽  
Zhengping Zhong ◽  
Qiao Liu ◽  
Jialei Liu ◽  
Wenqing He

Abstract Calcium sulfate whisker (CSW) is a kind of fiber crystal material with high orientation structure. The major goal of this research is to study the changes of mechanical properties and light transmittance of PE greenhouse film with different proportions of CSW. The experimental results show that the mechanical properties and light transmittance of PE/CSW films are enhanced compared with the pure PE. For PE/2%CSW, it shows a 18.6% increase in tear strength, a 3.1% increase in luminous transmittance and 17.7% increase in haze. The PE/5%CSW demonstrates a 12.8% higher in tensile strength, a 20.5% higher in tear strength, a 23.9% lower in luminous transmittance and a 53.0% higher in haze. This article gives a new formula to strengthen the mechanical properties of PE greenhouse films and finds the direction for the research and development of astigmatic covering film.


2010 ◽  
Vol 152-153 ◽  
pp. 821-824
Author(s):  
Hong Bo Liu ◽  
Ji Hu Wang ◽  
Shao Guo Wen ◽  
Chen Yu

The styrene-acrylic emulsions were prepared by copolymerization of styrene, acrylic acid and n-butyl acrylate; coatings were achieved by adding calcium sulfate whiskers and titanium dioxides at the presence of dispersing agents and rheological additives. The physical and mechanical properties as well as contact angles of coating films formed on tinplate were characterized in detail. The pencil hardness was slightly decreased; the contact angle was greatly decreased from 69.8o to 12oby adding the calcium sulfate to indicate the hydrophilic coating films may have self-cleaning properties.


RSC Advances ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 452-461
Author(s):  
Yi Han ◽  
Xian Zhou ◽  
Li Lei ◽  
Huiqun Sun ◽  
Zhiyuan Niu ◽  
...  

In order to improve the utilization of nanoscale zero-valent iron (nZVI) in activating persulfate (PS), a composite material of nZVI/CSW with nZVI supported on calcium sulfate whiskers (CSWs) was synthesized in this study.


2016 ◽  
Vol 150 (6) ◽  
pp. 1056-1062 ◽  
Author(s):  
Austin D. Ledingham ◽  
Jeryl D. English ◽  
Sercan Akyalcin ◽  
Benjamin E. Cozad ◽  
Joe C. Ontiveros ◽  
...  

2007 ◽  
Vol 12 (2) ◽  
pp. 170-177 ◽  
Author(s):  
Tolga Tuzuner ◽  
Ilyas Uygur ◽  
Irfan Sencan ◽  
Ugur Haklar ◽  
Birhan Oktas ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document