scholarly journals DUCTILITY EVALUATION OF REINFORCED CONCRETE COLUMN MADE OF NORMAL- TO HIGH-STRENGTH CONCRETE UNDER CONSTANT AXIAL LOAD LEVEL COMBINED WITH FLEXURAL LOADING USING NONLINEAR SECTIONAL FIBER BASED MODEL

2019 ◽  
Vol 34 (1) ◽  
pp. 3 ◽  
Author(s):  
Bambang Piscesa ◽  
Dwi Prasetya ◽  
Mudji Irmawan ◽  
Harun Alrasyid
Keyword(s):  
Reinforced Concrete ◽  
High Strength Concrete ◽  
Axial Load ◽  
High Strength ◽  
Load Level ◽  
Concrete Column ◽  
Reinforced Concrete Column ◽  
Strength Concrete ◽  
Flexural Loading ◽  
Constant Axial Load

Experimental Research on Bearing Capacity of Concrete Columns with High Strength Concrete Core under Axial Compression Loading

2012 ◽  
Vol 479-481 ◽  
pp. 2041-2045
Author(s):  
Yue Qi
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Axial Compression ◽  
High Strength Concrete ◽  
High Strength ◽  
Concrete Columns ◽  
Concrete Column ◽  
Reinforced Concrete Column ◽  
Concrete Core ◽  
Strength Concrete

Based on experimental research on plain concrete columns with high strength concrete core, the formula to predict the bearing capacity of concrete columns with high strength concrete core under axial compression loading was brought forward in previous paper, in order to verify the formula whether right, axial compression test including 3 concrete columns with high strength concrete core and 1 ordinary reinforced concrete column were completed, and the failure characteristic was analyzed additionally. According to experimental results, it can be shown that the failure modes of concrete columns with high strength concrete core are similar to that of ordinary reinforced concrete columns, however, the bearing capacity of concrete columns with high strength concrete core is significant higher compared with that of ordinary reinforced concrete column; the results of the bearing capacity obtained by the formula (2) was in good agreement with the experimental results.

Seismic Performance of High Titanium Heavy Slag High Strength Concrete Columns

2012 ◽  
Vol 174-177 ◽  
pp. 455-459 ◽  
Author(s):  
Xiao Wei Li ◽  
Xue Wei Li ◽  
Xin Yuan
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
High Strength Concrete ◽  
Load Ratio ◽  
High Strength ◽  
Scale Model ◽  
Transverse Reinforcement ◽  
Reinforced Concrete Column ◽  
Displacement Ductility ◽  
Strength Concrete

For expedite the development of high titanium heavy slag concrete, eight high titanium heavy slag high strength reinforced concrete (HTHS-HSRC) scale model column are studied. The eight HTHS-HSRC model columns are tested under reversed horizontal force. Primary experimental parameters include axial load ratio varying from 0.3 to 0.5, volumetric ratios of transverse reinforcement ranging from 1.38% to 1.56%, strength of high titanium heavy slag high strength concrete varying from 55.9 to 61.6 N/mm2 and configurations of transverse reinforcement. It is found from the test result that HTHS-HSRC model columns provides comparable seismic performance to those usually used reinforced concrete column in terms of member ductility, hysteretic and energy dissipation capacity. Primary Factors of Displacement Ductility of Model Columns are also discussed.

The Research on Ultimate Displacement Angle of Concrete Columns with High-Strength Materials

2013 ◽  
Vol 742 ◽  
pp. 51-55
Author(s):  
Guo Fu
Keyword(s):  
Reinforced Concrete ◽  
Deformation Behavior ◽  
High Strength Concrete ◽  
High Strength ◽  
Concrete Column ◽  
Reinforced Concrete Column ◽  
Drift Angle ◽  
Story Drift ◽  
Displacement Angle ◽  
Ultimate Displacement

Not collapse under strong earthquake is an important goal of the seismic design of reinforced concrete structure, seismic collapse resistance performance is directly affected by the deformation behavior of reinforced concrete column. The application of high-strength steel, high-strength stirrup and high-strength concrete can enhance the concrete material properties and mechanical properties of reinforced concrete column, but their deformation behavior have large differences. The research on the seismic performance of columns with high-strength materials, especially its deformation behavior, become the most important issue of anti-collapse analysis. In this paper, the ultimate displacement angle of concrete columns with high-strength materials were collected, the ultimate displacement angle and inter-story drift angle 1/50 were compared and analyzed. The results show that the average of ultimate displacement angle of the reinforced concrete column with high-strength stirrup and high-strength longitudinal bars are 0.0469, 0.0312, respectively, greater than inter-story drift angle 1/50, while the average of ultimate displacement angle with high-strength concrete and high-strength core concrete are 0.0147, 0.0167, less than 1/50, therefore, it is not suitable for taking 1/50 as the critical value of structure collapse with high-strength concrete. The inter-story drift angle should be different in the anti-collapse analysis.

Behavior of High-Strength Concrete-Filled FRP Tube Columns under Simulated Seismic Loading: An Experimental Study

2013 ◽  
Vol 743 ◽  
pp. 39-44
Author(s):  
Yunita Idris ◽  
Togay Ozbakkloglu
Keyword(s):  
Experimental Study ◽  
High Strength Concrete ◽  
Axial Load ◽  
Seismic Behavior ◽  
High Strength ◽  
Seismic Loading ◽  
Load Level ◽  
Experimental Program ◽  
Strength Concrete ◽  
Frp Tube

This paper reports on part of an ongoing experimental program at The University of Adelaide on the seismic behavior of high-strength concrete (HSC)-filled fiber reinforced polymer (FRP) tubes (HSCFFTs). The results from three square concrete-filled FRP tube (CFFT) columns that were tested under combined constant axial compression and reversed-cyclic lateral loading are presented. The main parameters of the experimental study included the axial load level, concrete strength, and FRP tube corner radius. The results indicate that square HSCFFT columns are capable of developing very high inelastic deformation capacities under simulated seismic loading. The results also indicate that increasing the corner radius beyond a certain threshold value provides no increase in column lateral drift capacities. It was observed that column deformability decreased with an increase in axial load level (P/Po) and concrete compressive strength (fc). The results of the experimental program are presented together with a discussion on the influence of the main parameters on the seismic behavior of CFFT columns.

scholarly journals Experimental evaluation of colored HSC column in fire conditions

2013 ◽  
Vol 3 (1) ◽  
pp. 39-54
Author(s):  
C. Britez ◽  
P. Castro-Borges ◽  
A. Berto ◽  
P. Helene
Keyword(s):  
Iron Oxide ◽  
High Strength Concrete ◽  
High Strength ◽  
Experimental Program ◽  
Concrete Column ◽  
Reinforced Concrete Column ◽  
Strength Concrete ◽  
Standard Fire ◽  
In Fire ◽  
Fire Conditions

ABSTRACTIn recent times it has been common to associate high-strength concrete with a greater susceptibility to explosive type spalling, when subjected to high temperatures. In part, this doubt is a result of some experimental programs that are carried out on small unreinforced concrete samples (specimens), which could substantially influence the structural concrete behavior in fire conditions. This paper presents an experimental program, carried out in Brazil on a high strength colored reinforced concrete column (HSCC), eight years-old, fc,8years = 140MPa, basalt coarse aggregate, cross section of 700mm x 700mm, tested under no load and with three faces exposed to standard fire curve ISO 834 for 180min (3h). The results demonstrated, in this case, that HSCC maintained integrity under experimental fire and that the iron oxide pigments can work as an excellent natural thermometer, contributing to the evaluation of the structure post-fire simulation.Keywords: High-strength concrete; fire resistance; colored concrete; column in fire; iron oxide pigment. RESUMENHa sido común asociar el concreto de alta resistencia con una mayor susceptibilidad al desprendimiento por explosión (spalling) cuando se le somete a altas temperaturas. Esta duda se debe en parte a los resultados de algunos programas experimentales que se han llevado a cabo en pequeñas probetas de concreto simple sin refuerzo, lo que puede influir sustancialmente en el comportamiento del concreto en situación de incendio. Este artículo presenta un programa experimental en Brasil donde un pilar de concreto armado colorido de alta resistencia (HCAR), con ocho años de edad, fc,8años = 140MPa, árido grueso basáltico, sección cuadrada de 700mm x 700mm, fue ensayado sin carga y con tres lados expuestos al fuego (curva ISO 834) durante 180min (3h). Los resultados demostraron en este caso que el HCAR se mantuvo íntegro y que los pigmentos de óxido de hierro pueden trabajar como excelente termómetro natural, contribuyendo en la evaluación de la estructura después de la simulación de incendio.Palabras Clave: Concreto de alta resistencia; resistencia al fuego; concreto colorido; pilar sometido al fuego; pigmento de óxido de hierro. 

Sign in / Sign up

Export Citation Format

Share Document