M701 Mechanical Properties of Alkali Treated Oil Palm Fiber

2015 ◽  
Vol 2015.90 (0) ◽  
pp. 349
Author(s):  
Hiroto OHTANI ◽  
Sachi TANAKA ◽  
Charlie SIA ◽  
Yoshikazu NAKAI
2018 ◽  
Vol 26 (8) ◽  
pp. 699-709 ◽  
Author(s):  
José Alexandre Simão ◽  
José Manoel Marconcini ◽  
Luiz Henrique Capparelli Mattoso ◽  
Anand Ramesh Sanadi

2008 ◽  
Vol 15 (2-3) ◽  
pp. 251-262 ◽  
Author(s):  
M. Khalid ◽  
A. Salmiaton ◽  
T. G. Chuah ◽  
C. T. Ratnam ◽  
S. Y. Thomas Choong

2014 ◽  
Vol 699 ◽  
pp. 146-150 ◽  
Author(s):  
Sivakumar Dhar Malingam ◽  
Muhammad Hilmi Ruzaini bin Hashim ◽  
Md Radzai bin Said ◽  
Ahmad Rivai ◽  
Mohd Ahadlin bin Daud ◽  
...  

Concern for the environment, both in terms of limiting the use of finite resources and the need to manage waste disposal, has led to increasing pressure to recycle materials at the end of their useful life. This work describes the effects of reprocessing on the mechanical properties of oil palm fiber reinforced polypropylene composites (PFC). Composites, containing 30wt% fiber with 3wt% Maleate Polypropylene as a coupling agent, were reprocessed up to six times. For this composite, tensile strength (TS) and Young modulus (YM) were found to decrease by 9.6% and 4.7% after being reprocessed for six times. Flexural strength was found to decrease by 23.8% with increased number of reprocessing. The hardness numbers of the composite were found to increase by 7.43% from 72.10 to 77.89 after the sixth reprocessing. In general the degradation on the mechanical properties is considered to be small and PFC has potential to be reprocessed.


Author(s):  
Abiodun Kilani ◽  
◽  
Christopher Fapohunda ◽  
Oluwatobi Adeleke ◽  
Charity Metiboba ◽  
...  

Wastes generation and emission of greenhouse gases are the major concerns of the contemporary world. Concrete’s cements companies in the globe are producing up to 2.8 billion tons of cements annually. This contributed to the emission of anthropogenic substances into the atmosphere which destroys the ozone layers. The incessant disposal of these agricultural wastes has detrimental effect on the environmental and human health. Thus, utilizing these wastes as secondary resources in concrete is a reasonable consideration in sustainable waste management in the circular economy. The use of agricultural wastes in concrete production has been gaining attraction in recent years, however, their effectiveness and performance in concrete need evaluation. This study presents an overview of the effects of some agricultural wastes: Bagasse, Coconut shell, Cotton, Oil palm and Hemp fibers on concrete and composite’s mechanical properties. As reviewed, Sugar-Cane Bagasse Ash (SCBA) and Coconut Shell Ash (CSA) are rich in cementitious (pozzolanic) properties (SiO2, Fe2O3 and Al2O3) for cement production up to 70%. Sugar-cane bagasse and oil palm-fiber ashes improved concrete workability. SCBA and CSA highly increased the concrete compressive strengths. The concrete tensile strengths were increased up to 97% with the inclusion of cotton and bagasse ashes. The SCBA, hemp-fiber and treated oil palm - fiber ash increased the concrete and composite’s flexural strengths up to 11.3%, 26.2% and 50.7% respectively. In conclusion, the output of this review will supply full data of the research gaps yet to cover on the use of agro-wastes in concrete for future investigations


Sign in / Sign up

Export Citation Format

Share Document