scholarly journals Evaluating the effects of agricultural wastes on concrete and composite mechanical properties: a review

Author(s):  
Abiodun Kilani ◽  
◽  
Christopher Fapohunda ◽  
Oluwatobi Adeleke ◽  
Charity Metiboba ◽  
...  

Wastes generation and emission of greenhouse gases are the major concerns of the contemporary world. Concrete’s cements companies in the globe are producing up to 2.8 billion tons of cements annually. This contributed to the emission of anthropogenic substances into the atmosphere which destroys the ozone layers. The incessant disposal of these agricultural wastes has detrimental effect on the environmental and human health. Thus, utilizing these wastes as secondary resources in concrete is a reasonable consideration in sustainable waste management in the circular economy. The use of agricultural wastes in concrete production has been gaining attraction in recent years, however, their effectiveness and performance in concrete need evaluation. This study presents an overview of the effects of some agricultural wastes: Bagasse, Coconut shell, Cotton, Oil palm and Hemp fibers on concrete and composite’s mechanical properties. As reviewed, Sugar-Cane Bagasse Ash (SCBA) and Coconut Shell Ash (CSA) are rich in cementitious (pozzolanic) properties (SiO2, Fe2O3 and Al2O3) for cement production up to 70%. Sugar-cane bagasse and oil palm-fiber ashes improved concrete workability. SCBA and CSA highly increased the concrete compressive strengths. The concrete tensile strengths were increased up to 97% with the inclusion of cotton and bagasse ashes. The SCBA, hemp-fiber and treated oil palm - fiber ash increased the concrete and composite’s flexural strengths up to 11.3%, 26.2% and 50.7% respectively. In conclusion, the output of this review will supply full data of the research gaps yet to cover on the use of agro-wastes in concrete for future investigations

CERNE ◽  
2017 ◽  
Vol 23 (2) ◽  
pp. 153-160
Author(s):  
Stefania Lima Oliveira ◽  
Ticyane Pereira Freire ◽  
Tamires Galvão Tavares Pereira ◽  
Lourival Marin Mendes ◽  
Rafael Farinassi Mendes

ABSTRACT The objective of this study is to assess the effect of the laminar inclusion on the physical and mechanical properties of sugarcane bagasse particleboard. We used the commercial panels of sugarcane bagasse produced in China. To evaluate the effect of the laminar inclusion was tested two wood species (Pinus and Eucalyptus) and two pressures (10 and 15 kgf.cm-2) along with a control (without laminar inclusion). The panels with laminar inclusion obtained improvements in the physical properties, with a significant reduction in the WA2h, WA24h and TS2h. There was a significant increase in the properties MOE and MOR parallel and Janka hardness, while the properties MOE and MOR perpendicular decreased significantly. The pinus and eucalyptus veneers inclusion resulted in similar results when added to the panel with a 10 kgf.cm-2 pressure. The use of 15 kgf.cm-2 pressure is not indicated for the pinus veneer inclusion in sugar cane bagasse panels. There was no effect of the pressure level when evaluating the eucalyptus veneer inclusion on the properties of the sugarcane bagasse panels.


2018 ◽  
Vol 26 (8) ◽  
pp. 699-709 ◽  
Author(s):  
José Alexandre Simão ◽  
José Manoel Marconcini ◽  
Luiz Henrique Capparelli Mattoso ◽  
Anand Ramesh Sanadi

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
R. Berenguer ◽  
N. Lima ◽  
A. C. Valdés ◽  
M. H. F. Medeiros ◽  
N. B. D. Lima ◽  
...  

The environmental impact of cement production increased significantly in the previous years. For each ton of cement produced, approximately a ton of carbon dioxide is emitted in decarbonation (50%), clinker furnace combustion (40%), raw materials transport (5%), and electricity (5%). Green strategies have been advanced to reduce it, adding natural or waste materials to substitute components or reinforce the mortar, like fibers or ashes. Sugar cane bagasse ash is a by-product generated from sugar boilers and alcohol factories with capacity to be used in concrete production. Composed mainly of silica, it can be used as mortar and concrete mineral admixture, providing great economic and environmental advantages, particularly in regions with sugar culture and industrial transformation like Brazil. In this research, a study of partial substitution of Portland cement by sugar cane bagasse (SCB) is analyzed, in order to reduce clinker in concrete volume, responsible for high emission of CO2 to the atmosphere. An experimental campaign with cementitious pastes was carried out to evaluate the durability properties’ changes due to SCB ash use. Samples containing 15% of sugarcane bagasse ash unveiled good results in terms of durability, indicating that concrete structure with sugar cane ash research is a new and important scientific topic to be highlighted.


2015 ◽  
Vol 2015.90 (0) ◽  
pp. 349
Author(s):  
Hiroto OHTANI ◽  
Sachi TANAKA ◽  
Charlie SIA ◽  
Yoshikazu NAKAI

2008 ◽  
Vol 15 (2-3) ◽  
pp. 251-262 ◽  
Author(s):  
M. Khalid ◽  
A. Salmiaton ◽  
T. G. Chuah ◽  
C. T. Ratnam ◽  
S. Y. Thomas Choong

2020 ◽  
Vol 8 (2) ◽  
pp. 103655 ◽  
Author(s):  
Romildo A. Berenguer ◽  
Ana Paula B. Capraro ◽  
Marcelo H. Farias de Medeiros ◽  
Arnaldo M.P. Carneiro ◽  
Romilde A. De Oliveira

2014 ◽  
Vol 634 ◽  
pp. 351-356 ◽  
Author(s):  
Andréa Aparecida Ribeiro Corrêa ◽  
Thiago de Paula Protásio ◽  
José Tarcísio de Lima ◽  
Gustavo Denzin Tonoli ◽  
Lourival Marin Mendes

Among non-conventional materials available in Brazil for construction, sugar cane bagasse lignocellulosic particles and “synthetic termite saliva” are included. The utilization of such particles as reinforcement and the “synthetic termite saliva” for soil chemical stabilization in adobe production were not investigated in the literature yet. Therefore, this research aimed to evaluate the mechanical properties of adobes produced with those materials. The soil used was Red Latosol Cambisol type with clayey texture with kaolinite presence, and particle size correction for 50% sand. Bagasse sliver particles were washed with residual water of the distillation process at 45°C and air dried. Their density and chemical composition were determined. The adobes were produced with 30x15x8cm-size wood molds. The following samples were analyzed: adobes without particles (control); and adobes with bagasse incorporation at 2%, 4% and 6% based on dry mass and “synthetic termite saliva” at 1:1500 and 1:500 proportions. Aluminum sulfate solvent was applied at 1:5,000. The adobes were stored in a covered warehouse until complete drying. Compression and static bending strength were evaluated. The results showed a positive interaction between adobe components and compression strength, which was improved up to 60%. The best composition tested was 6% sugar cane bagasse and “synthetic termite saliva” at 1:500.


Sign in / Sign up

Export Citation Format

Share Document