scholarly journals An infinite beam on an elastic foundation (The contact problem of two-dimensional elasticity)

1986 ◽  
Vol 52 (476) ◽  
pp. 949-957
Author(s):  
Chuji MIYATA ◽  
Tadahiko MATSUMOTO
1937 ◽  
Vol 4 (1) ◽  
pp. A1-A7 ◽  
Author(s):  
M. A. Biot

Abstract The elementary theory of the bending of a beam on an elastic foundation is based on the assumption that the beam is resting on a continuously distributed set of springs the stiffness of which is defined by a “modulus of the foundation” k. Very seldom, however, does it happen that the foundation is actually constituted this way. Generally, the foundation is an elastic continuum characterized by two elastic constants, a modulus of elasticity E, and a Poisson ratio ν. The problem of the bending of a beam resting on such a foundation has been approached already by various authors. The author attempts to give in this paper a more exact solution of one aspect of this problem, i.e., the case of an infinite beam under a concentrated load. A notable difference exists between the results obtained from the assumptions of a two-dimensional foundation and of a three-dimensional foundation. Bending-moment and deflection curves for the two-dimensional case are shown in Figs. 4 and 5. A value of the modulus k is given for both cases by which the elementary theory can be used and leads to results which are fairly acceptable. These values depend on the stiffness of the beam and on the elasticity of the foundation.


2012 ◽  
Vol 49 (13) ◽  
pp. 1588-1594 ◽  
Author(s):  
J.M. Long ◽  
G.F. Wang ◽  
X.Q. Feng ◽  
S.W. Yu

2002 ◽  
Vol 80 (5) ◽  
pp. 505-524 ◽  
Author(s):  
M Schlesinger ◽  
L F McAven ◽  
Y Yao

A numerical-modelling method is developed to investigate the stress of the static-equilibrium state of the two-dimensional frictional contact problem achieved through a quasistatic process of increasing loading. The problem of relative tangential displacement between particles on the two contact surfaces is addressed. This scheme relies on solving each of the two contact solids in turn and iterating back and forth. The solutions for the two elastic bodies are connected through the surface traction and surface deformation. The contact surface is approximated by a cubic spline, and friction is modelled using the classical Coulomb friction law. Variational inequalities and finite-element methods are used to implement this scheme and are solved by an optimization method. In addition, the distinction between Cauchy stress and Piola–Kirchoff stress is taken into account and discussed. A numerical investigation is conducted into the stress dependence on the loading conditions and geometries of the solids. The results from the numerical examples deviate from Hertz theory and previous reports. Stress is shown to be sensitive to the loading distribution and geometry of contact solids. Therefore, it suggests that an accurate analysis of the dry frictional contact problem requires a refined knowledge of the loading conditions and the total geometry of both solids. PACS Nos.: 03.40D, 46.30P, 62.20P


Sign in / Sign up

Export Citation Format

Share Document