scholarly journals Validity Analysis of Effective Medium Theory and Long Wave Approximation for the Optical Properties of Metal Surface Layer with Surface Roughness.

1999 ◽  
Vol 65 (640) ◽  
pp. 4890-4896
Author(s):  
Shigeo KOTAKE ◽  
Heng CHEN ◽  
Hiromitsu MIYASHIGE ◽  
Yasuyuki SUZUKI ◽  
Masafumi SENOO
2017 ◽  
Vol 743 ◽  
pp. 223-228
Author(s):  
Valery Belov ◽  
Evgeny Gubarev ◽  
Danil Begletsov ◽  
Oksana Krivko

New 3D metrology and new possibilities of modern measuring equipment allows observing in more details the process of metal surface layer deformation by rough surface of roll. The article covers the question of the change in the void volume of steel sheet rough layer at different section levels of rough layer by roll with different surface roughness.


2007 ◽  
Vol 5 ◽  
pp. 273-278
Author(s):  
V.Yu Liapidevskii

Nonequilibrium flows of an inhomogeneous liquid in channels and pipes are considered in the long-wave approximation. Nonlinear dispersion hyperbolic flow models are derived allowing taking into account the influence of internal inertia during the relative motion of phases upon the structure of nonlinear wave fronts. The asymptotic derivation of dispersion hyperbolic models is shown on the example of classical Boussinesq equations. It is shown that the hyperbolic approximation of the equations has the same order of accuracy as the primary model.


2011 ◽  
Vol 299-300 ◽  
pp. 65-68
Author(s):  
Ming Gao ◽  
Li Li Zhang ◽  
Tao Huang ◽  
Meng Ru Lv

A strong pulse electromagnetic field was employed to treat the surface layer of several metal materials. The results showed that the treatment of the strong pulse electromagnetic field could modify the microstructure of the region around the crack on the 45# steel surface. It could also make the recovery process occur in the scratch on the brass surface, and make the surface layer of the Wood’s alloy melt in a very shot time. These results indicated that the strong electromagnetic pulse could be developed as an effective non-contact method for the metal surface processing.


1976 ◽  
Vol 1 (15) ◽  
pp. 61
Author(s):  
Toshio Iwasaki

Although numerical computations of the generation and propagation of tsunamis are successfully achieved in recent years, modeling of their wave sources is still a big problem. Three kinds of, wave source model, that is statistical, oceanographic and fault model, are studied in this paper. It is found that the first model gives reasonable wave heights as shown in the previous paper, the second one presents roughly one half of those for the first model and the last one produces too small wave heights. Based on the analysis of computed results, nature of undulations off from the shore boundary, directivity of wave propagation and the spindle shaped leading part are discussed. Comparing magnitude of various wave parameters for the leading wave along the minor axis of the wave source, it is shown that the long wave approximation modified by the slope effect illustrates the tsunamis in deep region of the sea and the slope effect is most dominant in shallow region.


2018 ◽  
Vol 855 ◽  
Author(s):  
Dipin S. Pillai ◽  
R. Narayanan

The nonlinear evolution of an interface between a perfect conducting liquid and a perfect dielectric gas subject to periodic electrostatic forcing is studied under the long-wave approximation. It is shown that inertial thin films become unstable to finite-wavelength Faraday modes at the onset, prior to the long-wave pillaring instability reported in the lubrication limit. It is further shown that the pillaring-mode instability is subcritical in nature, with the interface approaching either the top or the bottom wall, depending on the liquid–gas holdup. On the other hand, the Faraday modes exhibit subharmonic or harmonic oscillations that nonlinearly saturate to standing waves at low forcing amplitudes. Unlike the pillaring mode, wherein the interface approaches the wall, Faraday modes may exhibit saturated standing waves when the instability is subcritical. At higher forcing amplitudes, the interface may approach either wall, again depending on the liquid–gas holdup. It is also shown that a gravitationally unstable configuration of such thin films, under the long-wave approximation, cannot be stabilized by periodic electrostatic forcing, unlike mechanical Faraday forcing. In this case, it is observed that the interface exhibits oscillatory sliding behaviour, approaching the wall in an ‘earthworm-like’ motion.


Sign in / Sign up

Export Citation Format

Share Document