A powerful new technique for laser crystals: Time-resolved Fourier Spectroscopy

Author(s):  
H. Weidner ◽  
R. E. Peale
2015 ◽  
Vol 21 (4) ◽  
pp. 1026-1033 ◽  
Author(s):  
Li He ◽  
Pei Zhang ◽  
Matthew F. Besser ◽  
Matthew Joseph Kramer ◽  
Paul M. Voyles

AbstractElectron correlation microscopy (ECM) is a new technique that utilizes time-resolved coherent electron nanodiffraction to study dynamic atomic rearrangements in materials. It is the electron scattering equivalent of photon correlation spectroscopy with the added advantage of nanometer-scale spatial resolution. We have applied ECM to a Pd40Ni40P20 metallic glass, heated inside a scanning transmission electron microscope into a supercooled liquid to measure the structural relaxation time τ between the glass transition temperature Tg and the crystallization temperature, Tx. τ determined from the mean diffraction intensity autocorrelation function g2(t) decreases with temperature following an Arrhenius relationship between Tg and Tg+25 K, and then increases as temperature approaches Tx. The distribution of τ determined from the g2(t) of single speckles is broad and changes significantly with temperature.


2008 ◽  
Vol 128 (5-6) ◽  
pp. 1013-1015 ◽  
Author(s):  
L.R. Freitas ◽  
C. Jacinto ◽  
A. Ródenas ◽  
D. Jaque ◽  
T. Catunda

1996 ◽  
Vol 4 (3) ◽  
pp. 177 ◽  
Author(s):  
Henry Weidner ◽  
Christian J. Schwindt ◽  
Robert E. Peale

1978 ◽  
Vol 17 (9) ◽  
pp. 1342 ◽  
Author(s):  
Hajime Sakai ◽  
Randall E. Murphy

1979 ◽  
Vol 23 (5) ◽  
pp. 556-575 ◽  
Author(s):  
D. S. Bethune ◽  
J. R. Lankard ◽  
M. M. T. Loy ◽  
P. P. Sorokin

We have developed a new, very rapid, spectroscopic recording technique with the aid of which photographic absorption spectra of transient intermediates with lifetimes in the nanosecond time range can be obtained. The technique is a hundred times faster than present flash spectrographic instrumentation and provides time-resolved absorption spectra over a wide spectral range in a single experiment. Frequency-doubling is used to obtain both a 347 nm laser pulse suitable for excitation and a 694 nm laser pulse from a single Q -switched ruby laser pulse. The 694 nm pulse is converted into a continuum for absorption spectroscopy by bringing it to a sharp focus in a suitable gas, so as to cause a laser-induced breakdown spark. The excitation pulse has a duration of 30 ns. The duration of the continuum pulse varies with the gas used. In 1 atm of oxygen it has a duration of 30 ns, is synchronized to within 10 ns with the excitation pulse and has an intensity adequate for single-shot flash spectroscopy. The laser-induced spark in 1 atm of xenon has a duration of several μs and provides an excellent background continuum, of essentially constant intensity, for kinetic spectroscopy over periods up to 1 μs, using an image-converter camera to provide time resolution. We have applied the laser photolysis technique to observing, for the first time, absorption spectra arising from the lowest excited singlet states of several aromatic hydrocarbons. The time-resolved spectra obtained show the decay of the new excited singlet absorption bands and the concomitant build-up of triplet-triplet absorption bands during the first microsecond following light absorption, thus depicting graphically the non-radiative process of intersystem crossing from the lowest excited singlet state to the triplet manifold. The new bands also serve to locate the energies of higher excited singlet levels which, in many cases, are inaccessible from the ground state. The new technique should find wide application to solid, liquid and gaseous systems and should contribute to the understanding of photochemical primary processes in the time range 10 -9 to 10 -6 s. Eventual extension of the technique to the 10 -12 s range appears possible by using mode-locked lasers.


2019 ◽  
Author(s):  
Timothy Atallah ◽  
Anthony Sica ◽  
Ashley Shin ◽  
Hannah Friedman ◽  
Justin Caram

We describe and implement an interferometric approach to decay associated photoluminescence spectroscopy, which we term decay associated Fourier spectroscopy (DAFS). In DAFS, the emitted photon stream from a substrate passes through a variable path length Mach-Zehnder interferometer prior to detection and timing. The interferometer encodes spectral information in the intensity measured at each detector enabling simultaneous spectral and temporal resolution. We detail several advantages of DAFS, including wavelength-range insensitivity, drift-noise cancellation, and optical mode retention. DAFS allows us to direct the photon stream into an optical fiber, enabling the implementation of superconducting nanowire single photon detectors for energy-resolved spectroscopy in the shortwave infrared spectral window (λ=1-2 μm). We demonstrate the broad applicability of DAFS, in both the visible and shortwave infrared, using two Förster resonance energy transfer pairs: a pair operating with conventional visible wavelengths and a pair showing concurrent acquisition in the visible and the shortwave infrared regime.


Sign in / Sign up

Export Citation Format

Share Document