20-J Diode-Pumped Zig-Zag Slab Laser with 2-GW Peak Power and 200-W Average Power

Author(s):  
T. Kawashima ◽  
T. Kurita ◽  
O. Matsumoto ◽  
T. Ikegawa ◽  
T. Sekine ◽  
...  
1993 ◽  
Author(s):  
Brian J. Comaskey ◽  
George F. Albrecht ◽  
Raymond J. Beach ◽  
Stephan P. Velsko ◽  
Steven B. Sutton ◽  
...  

1992 ◽  
Author(s):  
Brian J. Comaskey ◽  
Raymond J. Beach ◽  
George F. Albrecht ◽  
William J. Benett ◽  
Barry L. Freitas ◽  
...  

2009 ◽  
Vol 17 (4) ◽  
Author(s):  
Ł. Gorajek ◽  
J. Jabczyński ◽  
W. Żendzian ◽  
J. Kwiatkowski ◽  
H. Jelinkova ◽  
...  

AbstractThe aim of work was to characterize a simple oscillator consisted of Tm:YLF crystal end-pumped by a fiber coupled diode laser and active Q-switch with tunability option. About 7 W with near 35% slope efficiency was demonstrated in a free-running mode. The divergence angle was about 4.3 mrad and estimated parameter M2 < 1.3. Continuous tuning by means of Lyot’s filter, consisted of 2 quartz plates in the range of 1879.0–1939.4 nm with less than 1-nm linewidth, was achieved. For the best case (10-ms pump pulse duration, 42-A pump current corresponding to 266 mJ of pump energy), the Q-switched energy was 10.5 mJ with pulse duration of 22 ns corresponding to near 0.5 MW peak power. The 2.5 W of average power with 12.6-kW peak power and 2000-Hz repetition rate was demonstrated for cw pumping regime.


Author(s):  
Pascal J. Weinert ◽  
Marius Grossmann ◽  
Uwe Brauch ◽  
Michael Jetter ◽  
Peter Michler ◽  
...  

Author(s):  
T. Kawashima ◽  
T. Kurita ◽  
O. Matsumoto ◽  
T. Ikegawa ◽  
T. Sekine ◽  
...  

Photonics ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 15
Author(s):  
Mehmetcan Akbulut ◽  
Leonid Kotov ◽  
Kort Wiersma ◽  
Jie Zong ◽  
Maohe Li ◽  
...  

We report on an eye-safe, transform-limited, millijoule energy, and high average power fiber laser. The high gain and short length of the NP phosphate-glass fibers enable the SBS-free operation with kW level peak power. The output energy is up to 1.3 mJ, and the average power is up to 23 W at an 18 kHz repetition rate with 600 ns pulses (peak power > 2.1 kW). The PER is ≈16 dB and the M2 of the beam is 1.33 × 1.18. The coherent LIDAR Figure Of Merit (FOM) is 174 mJ*sqrt(Hz), which to our knowledge is the highest reported for a fiber laser. We also report 0.75 mJ energy and >3.7 kW peak power with down to 200 ns pulses and up to 1.21 mJ energy with a 3–5 kHz repetition rate operation of the current system.


Author(s):  
J. Boudeile ◽  
Y. Zaouter ◽  
F. Druon ◽  
M. Hanna ◽  
P. Georges ◽  
...  
Keyword(s):  

Author(s):  
Yangyu Liu ◽  
Xue Cao ◽  
AnHua Xian ◽  
Guangmiao Liu ◽  
Wei zhou ◽  
...  

Abstract We demonstrate stable continuous-wave mode-locking (CWML) pulses around 1645nm by employing the home-made Er:YAG ceramic. By using a fiber laser and semiconductor saturable absorber mirror (SESAM) with modulation depth of 1.2%, we get ML pulses with the output average power up to 815 mW, the pulse width shortened as ~4 ps, and the peak power of 1.8 kW. With the SESAM of modulation depth of 2.4%, the second-order harmonic ML pulses were also obtained. As far as we know, this is the first report of CWML from Er3+-doped ceramics and also the shortest pulse duration in Er3+-doped solid-state oscillators.


Author(s):  
J.R. Untermahrer ◽  
J.L. August ◽  
X. Chen ◽  
M.J. Kukia ◽  
W.T. Lotshaw ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document