2Gb/s AND 600Mb/s SINGLE MODE FIBER TRANSMISSION USING A HIGH-SPEED Zn-DOPED 1.3μm EDGE-EMITTING LED

1987 ◽  
Author(s):  
J. Hayashi ◽  
S. Fujita ◽  
Y. Isoda ◽  
T. Uji ◽  
M. Shikada ◽  
...  
Keyword(s):  
High Speed ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Fiber Transmission

scholarly journals Investigations of the Absorption Front in High-Speed Laser Processing Up to 600 m/min

2021 ◽  
Vol 11 (9) ◽  
pp. 4015
Author(s):  
Peter Hellwig ◽  
Klaus Schricker ◽  
Jean Pierre Bergmann
Keyword(s):  
High Speed ◽  
Glass Plate ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Process Models ◽  
External Process ◽  
Steel Aisi ◽  
Loss Of Mass ◽  
Processing Zone ◽  
High Processing

High processing speeds enormously enlarge the number of possible fields of application for laser processes. For example, material removal for sheet cutting using multiple passes or precise mass corrections can be achieved by means of spatter formation. For a better understanding of spatter formation at processing speeds of several hundred meters per minute, characterizations of the processing zone are required. For this purpose, a 400 W single-mode fiber laser was used in this study to process stainless steel AISI 304 (1.4301/X5CrNi18-10) with speeds of up to 600 m/min. A setup was developed that enabled a lateral high-speed observation of the processing zone by means of a glass plate flanking. This approach allowed for the measurement of several dimensions, such as the penetration depth, spatter formation, and especially, the inclination angle of the absorption front. It was shown that the loss of mass started to significantly increase when the absorption front was inclined at about 60°. In combination with precise weighings, metallographic examinations, and further external process observations, these findings provided an illustration of four empirical process models for different processing speeds.

The Engagement of Hybrid Ultra High Space Division Multiplexing with Maximum Time Division Multiplexing Techniques for High-Speed Single-Mode Fiber Cable Systems

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
I. S. Amiri ◽  
P. G. Kuppusamy ◽  
Ahmed Nabih Zaki Rashed ◽  
P. Jayarajan ◽  
M. R. Thiyagupriyadharsan ◽  
...  
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Design Parameters ◽  
Control Parameters ◽  
Data Rates ◽  
Fiber Optic Communication ◽  
High Space ◽  
Optic Communication

AbstractHigh-speed single-mode fiber-optic communication systems have been presented based on various hybrid multiplexing schemes. Refractive index step and silica-doped germanium percentage parameters are also preserved during their technological boundaries of attention. It is noticed that the connect design parameters suffer more nonlinearity with the number of connects. Two different propagation techniques have been used to investigate the transmitted data rates as a criterion to enhance system performance. The first technique is soliton propagation, where the control parameters lead to equilibrium between the pulse spreading due to dispersion and the pulse shrinking because of nonlinearity. The second technique is the MTDM technique where the parameters are adjusted to lead to minimum dispersion. Two cases are investigated: no dispersion cancellation and dispersion cancellation. The investigations are conducted over an enormous range of the set of control parameters. Thermal effects are considered through three basic quantities, namely the transmission data rates, the dispersion characteristics, and the spectral losses.

A 75-km single-mode fiber transmission experiment at 565 Mbit/s using cost-effective constituents

1984 ◽  
Vol 2 (4) ◽  
pp. 406-414 ◽  
Author(s):  
J. Bernard ◽  
L. Jeunhomme ◽  
M. Jurczyszyn ◽  
G. Lavanant ◽  
S. Landais ◽  
...  
Keyword(s):  
Single Mode ◽  
Cost Effective ◽  
Single Mode Fiber ◽  
Transmission Experiment ◽  
Fiber Transmission

Quasi-Single-Mode Fiber Transmission for Optical Communications

2017 ◽  
Vol 23 (3) ◽  
pp. 31-42 ◽  
Author(s):  
John D. Downie ◽  
Michal Mlejnek ◽  
Ioannis Roudas ◽  
William A. Wood ◽  
Aramais Zakharian ◽  
...  
Keyword(s):  
Optical Communications ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Fiber Transmission

Performance Optimization of 45-Channel Superdense Wavelength-Division-Multiplexed (SDWDM) Optical Add–Drop Multiplexer (OADM) Ring Network

2015 ◽  
Vol 36 (2) ◽  
Author(s):  
Vikrant Sharma ◽  
Anurag Sharma ◽  
Dalvir Kaur
Keyword(s):  
Wavelength Division Multiplexing ◽  
Performance Optimization ◽  
High Speed ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Ring Network ◽  
Channel Spacing ◽  
Modulation Formats ◽  
Eye Diagram ◽  
Wavelength Division

AbstractIn this paper, performance analysis of high-speed superdense wavelength-division-multiplexing (SDWDM) optical add–drop multiplexer (OADM) optical ring network for 6 nodes, 45 wavelengths having channel spacing of 0.2 nm on 300 km unidirectional nonlinear single-mode fiber ring of 10 Gbit/s has been reported. The performance optimization of the system by comparing different modulation formats has been reported on the basis of eye diagram and bit error rate (BER). It has been reported that CSRZ modulation format can achieve BER as better as e-24, which gives best performance. This paper also presents a study of performance degradation caused by the crosstalk and the effect of channel spacing on SWDM system.

Sign in / Sign up

Export Citation Format

Share Document