scholarly journals Amperometric biosensing system directly powered by button cell battery for lactate

PLoS ONE ◽  
2019 ◽  
Vol 14 (3) ◽  
pp. e0212943
Author(s):  
Xiaojin Luo ◽  
Xuesong Yao ◽  
Yalei Zhang ◽  
Xingwen Zheng ◽  
Guangming Xie ◽  
...  
Keyword(s):  
Button Cell ◽  
Biosensing System

3D localization for subcentimeter-sized devices

2021 ◽  
Vol 64 (3) ◽  
pp. 117-125
Author(s):  
Rajalakshmi Nandakumar ◽  
Vikram Iyer ◽  
Shyamnath Gollakota
Keyword(s):  
Metropolitan Area ◽  
Ultra Wideband ◽  
Phase Information ◽  
Noise Floor ◽  
Localization System ◽  
Coin Cell ◽  
3D Localization ◽  
Button Cell ◽  
Iot Devices ◽  
5 Ghz

The vision of tracking small IoT devices runs into the reality of localization technologies---today it is difficult to continuously track objects through walls in homes and warehouses on a coin cell battery. Although Wi-Fi and ultra-wideband radios can provide tracking through walls, they do not last more than a month on small coin and button cell batteries because they consume tens of milliwatts of power. We present the first localization system that consumes microwatts of power at a mobile device and can be localized across multiple rooms in settings such as homes and hospitals. To this end, we introduce a multiband backscatter prototype that operates across 900 MHz, 2.4 GHz, and 5 GHz and can extract the backscatter phase information from signals that are below the noise floor. We build subcentimeter-sized prototypes that consume 93 μW and could last five to ten years on button cell batteries. We achieved ranges of up to 60 m away from the AP and accuracies of 2, 12, 50, and 145 cm at 1, 5, 30, and 60 m, respectively. To demonstrate the potential of our design, we deploy it in two real-world scenarios: five homes in a metropolitan area and the surgery wing of a hospital in patient pre-op and post-op rooms as well as storage facilities.

Battery-Related Injuries in Children and Adults

2020 ◽  
Vol 64 (1) ◽  
pp. 1665-1670
Author(s):  
Jacqueline Zimmermann ◽  
Danielle King ◽  
Caroline Crump
Keyword(s):  
Emergency Room ◽  
Surveillance System ◽  
Rechargeable Batteries ◽  
Injury Surveillance ◽  
Consumer Product ◽  
Age Group ◽  
Injury Surveillance System ◽  
Probability Sample ◽  
Injury Data ◽  
Button Cell

The aim of the current study was to analyze the circumstances behind battery injuries, including the mode of injuries experienced (e.g., a shock or consumption), as well as the battery types and products most frequently involved in battery injuries. The National Electronic Injury Surveillance System (NEISS), a probability sample of US hospitals that collects information from emergency room (ER) visits related to a consumer product, was utilized. Injury data from the NEISS database was coded to identify a) the accident mode that led to the injury, b) the battery type involved, and c) the product that was powered by the battery or charger, if available. The data revealed that battery-related injuries were most often associated with (1) children consuming button cell batteries associated with toys and other household objects, and (2) adults becoming burned when handling vehicle batteries. Surprisingly, injuries associated with rechargeable batteries were the least frequent; however, when burns occurred, they were predominantly related to e- cigarettes, as well as vehicles. Results are discussed in terms of general exposure to specific battery types and products analyzing these battery types within each age group.

scholarly journals A wearable chemical–electrophysiological hybrid biosensing system for real-time health and fitness monitoring

2016 ◽  
Vol 7 (1) ◽  
Author(s):  
Somayeh Imani ◽  
Amay J. Bandodkar ◽  
A. M. Vinu Mohan ◽  
Rajan Kumar ◽  
Shengfei Yu ◽  
...  
Keyword(s):  
Real Time ◽  
Health And Fitness ◽  
Biosensing System

scholarly journals FABRICATION AND ELECTROCHEMICAL PERFORMANCE OF LiFePO4/Ga-LLZO/Li ALL-SOLID-STATE LITHIUM BUTTON CELL

2021 ◽  
Vol 11 (1) ◽  
pp. 96-104
Author(s):  
Ruziel Larmae Gimpaya ◽  
Shari Ann Botin ◽  
Rinlee Butch Cervera
Keyword(s):  
Solid State ◽  
Solid Electrolyte ◽  
Lithium Battery ◽  
Total Conductivity ◽  
Capacity Retention ◽  
Sem Images ◽  
Button Cell ◽  
Xrd Patterns ◽  
Discharging Capacity ◽  
Good Retention

An all-solid-state Lithium button cell with Ga-doped Li7La3Zr2O12 (Ga-LLZO) as solid electrolyte, LiFePO4-based as cathode, and Li metal as anode has been successfully fabricated and characterized. The solid electrolyte was first optimized to obtain a high total conductivity. Different compositions of Li7-3xGaxLa3Zr2O12, where x =0, 0.1, 0.2, and 0.3. Li7La3Zr2O12 (LLZO) were synthesized using solid-state reaction and were characterized for its structural, morphological, electrical conductivity properties. XRD patterns of all sintered samples showed that all of the major peaks can be indexed to a cubic-phased garnet LLZO. SEM images revealed a densified sintered samples with relative densities of about 90% for all samples. Among the different studied compositions, the Ga-doped LLZO with x = 0.1 achieved the highest total conductivity of about 2.03 x 10-4 Scm-1 at 25oC, with an activation energy of 0.31 eV. From this solid electrolyte, an all-solid-state Lithium battery, 2032 button cell, was fabricated using LiFePO4-based cathode and Lithium metal as the anode. Charging and discharging characteristics were performed at 1C, 0.5C, and 0.2C rates. The results showed a good retention of coloumbic efficiency even after 50 cycles of charge and discharge. The capacity retention is about 15-20% after 50 cycles. The best performance of the coin cell battery revealed an initial specific discharging capacity of about 140 mAh/g using C/5 rate.

Sign in / Sign up

Export Citation Format

Share Document