scholarly journals Rapid detection of Clostridium perfringens in food by loop-mediated isothermal amplification combined with a lateral flow biosensor

PLoS ONE ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. e0245144
Author(s):  
Thanawat Sridapan ◽  
Wanida Tangkawsakul ◽  
Tavan Janvilisri ◽  
Wansika Kiatpathomchai ◽  
Sirintip Dangtip ◽  
...  
Keyword(s):  
Clostridium Perfringens ◽  
Culture Method ◽  
Food Samples ◽  
Cross Reactivity ◽  
Lateral Flow ◽  
Isothermal Amplification ◽  
Bacterial Strains ◽  
Commercial Test ◽  
Loop Mediated Isothermal Amplification ◽  
Test Kit

Clostridium perfringens is a key anaerobic pathogen causing food poisoning. Definitive detection by standard culture method is time-consuming and labor intensive. Current rapid commercial test kits are prohibitively expensive. It is thus necessary to develop rapid and cost-effective detection tool. Here, loop-mediated isothermal amplification (LAMP) in combination with a lateral-flow biosensor (LFB) was developed for visual inspection of C. perfringens-specific cpa gene. The specificity of the developed test was evaluated against 40 C. perfringens and 35 other bacterial strains, which showed no cross-reactivity, indicating 100% inclusivity and exclusivity. LAMP-LFB detection limit for artificially contaminated samples after enrichment for 16 h was 1–10 CFU/g sample, which was comparable to the commercial real-time PCR kit. The detection performance of LAMP-LFB was also compared to culture-based method using 95 food samples, which revealed the sensitivity (SE), specificity (SP) and Cohen's kappa coefficient (κ) of 88.0% (95% CI, 75.6%-95.4%), 95.5% (95% CI, 84.8%-99.4%) and 0.832 (95% CI, 0.721–0.943), respectively. Area under the receiver operating characteristic (ROC) curve was 0.918 (95% CI, 0.854–0.981), indicating LAMP-LFB as high relative accuracy test. In conclusion, LAMP-LFB assay is a low-cost qualitative method and easily available for routine detection of C. perfringens in food samples, which could serve as an alternative to commercial test kit.

scholarly journals Lateral flow biosensor combined with loop-mediated isothermal amplification for detection of legionella pneumophila.

2021 ◽  
Author(s):  
Luxi Jiang ◽  
Xiaomeng Li ◽  
Rumeng Gu ◽  
Ziling Shi ◽  
Meijun Song ◽  
...  
Keyword(s):  
Legionella Pneumophila ◽  
Culture Method ◽  
Lavage Fluid ◽  
Lateral Flow ◽  
Isothermal Amplification ◽  
Clinical Samples ◽  
Specific Gene ◽  
Minimum Concentration ◽  
Loop Mediated Isothermal Amplification ◽  
Whole Process

Abstract Legionella pneumophila ( L. pneumophila ) is the most pathogenic species of Legionella , which can cause Legionella disease. It can cause pneumonia, or Pontiac fever. In severe cases, it can lead to respiratory failure and kidney failure, with a high fatality rate. Here, a novel molecular diagnosis method, a loop-mediated isothermal amplification coupled with lateral flow biosensor (LFB) method (LAMP-LFB) was successfully established and evaluated for the identification of L. pneumophila . A set of 6 primers was designed specifically based on the L. pneumophila -specific gene mip. The optimized time and temperature conditions for the LAMP was 50 min and 64◦C respectively. The minimum concentration that can be detected by this method was 100fg. Using the protocol, we could observe the LAMP amplification within 2min by LFB. The whole process, including the preparation of DNA (20 min), LAMP reaction (50 min) and results reporting (2 min), could be finished within 75 min. Among 50 alveolar lavage fluid samples, 5(10%) were L. pneumophila -positive by the LAMP-LFB, and the diagnostic accuracy was 100% when compared to the culture method. While only 4 samples were positive using PCR method. In a word, the LAMP-LFB assay is a rapid, sensitive and specific detection method that can detect Legionella pneumophila , and it can be used as a new molecular method for the detection of target pathogens in water, environmental and clinical samples.

Development and application of loop-mediated isothermal amplification label-based nanoparticles lateral flow biosensor for detection of Mycobacterium tuberculosis

2019 ◽  
Author(s):  
Xingyun Wang ◽  
Yi Wang ◽  
Weiwei Jiao ◽  
Guirong Wang ◽  
Yacui Wang ◽  
...  
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Diagnostic Technique ◽  
Cost Effective ◽  
Cross Reactivity ◽  
Lateral Flow ◽  
Isothermal Amplification ◽  
Clinical Samples ◽  
High Morbidity ◽  
Analytical Sensitivity ◽  
Loop Mediated Isothermal Amplification

Abstract Tuberculosis is a serious disease with high morbidity and mortality, thus rapid and cost-effective diagnostic test for Mycobacterium tuberculosis (MTB) is urgently needed. Here, a novel detection diagnostic technique, termed as loop-mediated isothermal amplification label-based nanoparticles with lateral flow biosensor (LAMP-LFB), was developed and evaluated for rapid, reliable and objective detection of MTB. Two sets of primers, which targeted IS 6110 and IS 1081 sequences of MTB, were simultaneously designed for establishment of LAMP-LFB assay. The optimal reaction conditions of MTB-LAMP-LFB assay confirmed were 66ºC for only 50min. The analytical sensitivity of MTB-LAMP-LFB is 10fg of genomic templates in pure culture, and the detection results obtained from LFB was in conformity with agarose gel electrophoresis. No cross-reactivity with other common bacteria and non-tuberculous mycobacteria strains (NTM) was obtained. A total of 158 clinical samples were collected from presumptive 158 TB patients, were used for evaluating the feasibility of MTB-LAMP-LFB assay. Among 98 TB patients diagnosed with composite reference standard, the positive rate for MTB detection using liquid culture, Xpert MTB/RIF and LAMP-LFB were 40.0% (39/98), 50.0% (48/98), and 86.7% (85/98), respectively. Among 39 culture confirmed samples, 84.6% (33/39) cases were Xpert MTB/RIF-positive and 92.3% (36/39) were LAMP-LFB-positive. For the 59 clinically diagnosed TB cases 25.4% (15/59) and 83.0% (49/59) were Xpert MTB/RIF-positive and LAMP-LFB positive, respectively. Therefore, MTB-LAMP-LFB assay is a simple, reliable, and sensitive method for MTB detection and maybe prospective in early diagnosis of MTB.

scholarly journals Development and Preliminary Application of Multiplex Loop-Mediated Isothermal Amplification Coupled With Lateral Flow Biosensor for Detection of Mycobacterium tuberculosis Complex

2021 ◽  
Vol 11 ◽  
Author(s):  
Xingyun Wang ◽  
Guirong Wang ◽  
Yacui Wang ◽  
Shuting Quan ◽  
Hui Qi ◽  
...  
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Mycobacterium Tuberculosis Complex ◽  
Fluorescein Isothiocyanate ◽  
Cross Reactivity ◽  
Lateral Flow ◽  
Isothermal Amplification ◽  
Clinical Samples ◽  
Analytical Sensitivity ◽  
Tuberculosis Complex ◽  
Loop Mediated Isothermal Amplification

The aim of this study was to develop a simple and reliable method to detect Mycobacterium tuberculosis complex (MTBC) and verify its clinical application preliminarily. A loop-mediated isothermal amplification method coupled with lateral flow biosensor (LAMP-LFB) assay, was developed and evaluated for detection of MTBC. Two sets of primers, which targeted IS6110 and IS1081 sequences of MTBC, were designed for establishment of multiplex LAMP-LFB assay. The amplicons were labelled with biotin and fluorescein isothiocyanate (FITC) by adding FITC labelled primer and biotin-14-dATP and biotin-14-dCTP and could be visualized using LFB. The optimal reaction conditions of multiplex LAMP-LFB assay confirmed were 66°C for 50 min. The analytical sensitivity of multiplex LAMP-LFB is 10 fg of genomic templates using pure culture, and no cross-reactivity with other common bacteria and non-tuberculous mycobacteria strains was obtained. A total of 143 clinical samples collected from 100 TB patients (62 definite TB cases and 38 probable TB cases) and 43 non-TB patients were used for evaluating the feasibility of multiplex LAMP-LFB assay. The multiplex LAMP-LFB (82.0%, 82/100) showed higher sensitivity than culture (47.0%, 47/100, P < 0.001) and Xpert MTB/RIF (54.0%, 54/100, P < 0.001). Importantly, the multiplex LAMP-LFB assay detected additional 28 probable TB cases, which increased the percentage of definite TB cases from 62.0% (62/100) to 90.0% (90/100). The specificity of multiplex LAMP-LFB assay in patients without TB was 97.7% (42/43). Therefore, multiplex LAMP-LFB assay is a simple, reliable, and sensitive method for MTBC detection, especially in probable TB cases and resource limited settings.

Detection of Enteroaggregative Escherichia coli by Loop-Mediated Isothermal Amplification

2010 ◽  
Vol 73 (6) ◽  
pp. 1064-1072 ◽  
Author(s):  
EIJI YOKOYAMA ◽  
MASAKO UCHIMURA ◽  
KENITIRO ITO
Keyword(s):  
Escherichia Coli ◽  
Food Samples ◽  
Isothermal Amplification ◽  
Lamp Method ◽  
Bacterial Strains ◽  
Exact Test ◽  
Loop Mediated Isothermal Amplification ◽  
Amplification Method ◽  
Contaminated Food ◽  
Better Than

A novel gene amplification method, loop-mediated isothermal amplification (LAMP), has been recently developed as a rapid, specific diagnostic method for various infectious diseases. We have investigated whether LAMP can be used to detect small numbers of enteroaggregative Escherichia coli (EAEC) cells contaminated in food samples. Primers for LAMP reaction were designed with EAEC aggR gene sequences (available in GenBank). LAMP specificity with these primers was the same as that of PCR in a study of 37 EAEC and 42 non-EAEC bacterial strains. The sensitivity of the LAMP method was better than that of PCR in a study of serially diluted EAEC cells. The LAMP method was significantly more effective than was PCR in detecting EAEC-contaminated food samples (Fisher's exact test, P < 0.05). Therefore, the LAMP method described here should be useful for detecting small numbers of EAEC cells in food samples.

scholarly journals Nanoparticle-Based Lateral Flow Biosensors Integrated With Loop-Mediated Isothermal Amplification for the Rapid and Visual Diagnosis of Hepatitis B Virus in Clinical Application

2021 ◽  
Vol 9 ◽  
Author(s):  
Xu Chen ◽  
Shoshi Wang ◽  
Yan Tan ◽  
Junfei Huang ◽  
Xingui Yang ◽  
...  
Keyword(s):  
Hepatitis B Virus ◽  
Hepatitis B ◽  
Cost Saving ◽  
Clinical Application ◽  
Limit Of Detection ◽  
Cross Reactivity ◽  
Lateral Flow ◽  
Isothermal Amplification ◽  
Loop Mediated Isothermal Amplification ◽  
B Virus

Hepatitis B virus (HBV) infection remains one of the major public health issues worldwide. Developing a rapid, sensitive, specific, easy-to-operate, and cost-saving approach for the diagnosis of HBV is essential for its therapy and prevention. Here, we first devised a novel approach, termed “loop-mediated isothermal amplification integrated with a nanoparticle-based lateral flow biosensor (LAMP-LFB),” for the detection of HBV in clinical application. The results indicated that a set of LAMP primers based on the S gene were valid for the establishment of HBV-LAMP-LFB. The optimal HBV-LAMP can be carried out at a constant temperature of 65°C for 40 min. The whole detection process, including HBV genomic DNA preparation (∼10 min), LAMP (40 min), and LFB reading (within 2 min), can be accomplished within 60 min. The limit of detection of the HBV-LAMP-LFB assay was 7.5 IU per test. The specificity of this assay was one hundred percent, and there was no cross-reactivity with other pathogens. Hence, these results indicated that the HBV-LAMP-LFB assay established in the current study is a sensitive, rapid, specific, visual, simple, and cost-saving method for the screening of HBV agents. More importantly, the HBV-LAMP-LFB has remarkable potential to develop a point-of-care testing in clinical application, especially in resource-scarce regions.

scholarly journals Efficient and Specific Detection ofSalmonellain Food Samples Using astn-Based Loop-Mediated Isothermal Amplification Method

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Mevaree Srisawat ◽  
Watanalai Panbangred
Keyword(s):  
Lamp Assay ◽  
High Sensitivity ◽  
High Specificity ◽  
Culture Method ◽  
Food Samples ◽  
Isothermal Amplification ◽  
Lamp Method ◽  
Loop Mediated Isothermal Amplification ◽  
Amplification Method ◽  
Pure Cultures

TheSalmonellaenterotoxin (stn) gene exhibits high homology amongS. entericaserovars andS. bongori. A set of 6 specific primers targeting thestngene were designed for detection ofSalmonellaspp. using the loop-mediated isothermal amplification (LAMP) method. The primers amplified target sequences in all 102 strains of 87 serovars ofSalmonellatested and no products were detected in 57 non-Salmonellastrains. The detection limit in pure cultures was 5 fg DNA/reaction when amplified at 65°C for 25 min. The LAMP assay could detectSalmonellain artificially contaminated food samples as low as 220 cells/g of food without a preenrichment step. However, the sensitivity was increased 100-fold (~2 cells/g) following 5 hr preenrichment at 35°C. The LAMP technique, with a preenrichment step for 5 and 16 hr, was shown to give 100% specificity with food samples compared to the reference culture method in which 67 out of 90 food samples gave positive results. Different food matrixes did not interfere with LAMP detection which employed a simple boiling method for DNA template preparation. The results indicate that the LAMP method, targeting thestngene, has great potential for detection ofSalmonellain food samples with both high specificity and high sensitivity.

Sign in / Sign up

Export Citation Format

Share Document