Research on the Seismic Design of High-rise Steel Building Based on Security Perspective

2016 ◽  
Vol 10 (5) ◽  
pp. 253-262 ◽  
Author(s):  
Changhao Zhang ◽  
Jianhu Feng ◽  
Xuntao Wang
Keyword(s):  
Seismic Design ◽  
High Rise ◽  
Steel Building

scholarly journals A Study on the Effectiveness of Bracing Systems in Soft Storey Steel Buildings

1970 ◽  
Vol 4 (2) ◽  
pp. 97-108
Author(s):  
Shalaka Dhokane ◽  
K. K. Pathak
Keyword(s):  
Seismic Design ◽  
Bending Moment ◽  
Lateral Stiffness ◽  
Steel Buildings ◽  
Soft Storey ◽  
Soft Story ◽  
High Rise ◽  
Maximum Shear Force ◽  
Steel Building ◽  
Bracing System

A soft storey or a weak storey is one in which the lateral stiffness is less than 70 percent of that in the storey above or it can be less than 80 percent of the average lateral stiffness of the three stories above. For the reduction of lateral deflection of a structure, a bracing system is provided. In seismic design of structure and in high rise structure, the provision of bracing system has become more effective. So this paper aims to find out the effect of bracing on soft storey of steel building. In this paper, G+9 steel frames are modeled with different type of bracing pattern and different combination of soft story using software STAAD Pro. Effect of these different bracings on soft storey is studied for different parameter like column displacement, maximum deflection, storey drift, maximum bending moment, maximum axial force and maximum shear force. From the observed result best type of bracing will be selected.

Design of a High-Rise Steel Building to Resist Disproportionate Collapse

2014 ◽  
Vol 102 (20) ◽  
pp. 1722-1725
Author(s):  
Karl Rubenacker ◽  
Ramon Gilsanz ◽  
Philip Murray ◽  
Eugene Kim
Keyword(s):  
High Rise ◽  
Disproportionate Collapse ◽  
Steel Building

scholarly journals Development and Validation of a Post-Earthquake Safety Assessment System for High-Rise Buildings Using Acceleration Measurements

Mathematics ◽  
2021 ◽  
Vol 9 (15) ◽  
pp. 1758
Author(s):  
Koji Tsuchimoto ◽  
Yasutaka Narazaki ◽  
Billie F. Spencer
Keyword(s):  
Safety Assessment ◽  
Large Scale ◽  
Model Updating ◽  
Safety Evaluation ◽  
Assessment System ◽  
Shaking Table ◽  
Structural Safety ◽  
High Rise ◽  
Steel Building ◽  
Earthquake Safety

After a major seismic event, structural safety inspections by qualified experts are required prior to reoccupying a building and resuming operation. Such manual inspections are generally performed by teams of two or more experts and are time consuming, labor intensive, subjective in nature, and potentially put the lives of the inspectors in danger. The authors reported previously on the system for a rapid post-earthquake safety assessment of buildings using sparse acceleration data. The proposed framework was demonstrated using simulation of a five-story steel building modeled with three-dimensional nonlinear analysis subjected to historical earthquakes. The results confirmed the potential of the proposed approach for rapid safety evaluation of buildings after seismic events. However, experimental validation on large-scale structures is required prior to field implementation. Moreover, an extension to the assessment of high-rise buildings, such as those commonly used for residences and offices in modern cities, is needed. To this end, a 1/3-scale 18-story experimental steel building tested on the shaking table at E-Defense in Japan is considered. The importance of online model updating of the linear building model used to calculate the Damage Sensitive Features (DSFs) during the operation is also discussed. Experimental results confirm the efficacy of the proposed approach for rapid post-earthquake safety evaluation for high-rise buildings. Finally, a cost-benefit analysis with respect to the number of sensors used is presented.

Analysis on Seismic Performance of Beam and Plate Converter Floor

2014 ◽  
Vol 580-583 ◽  
pp. 1551-1554
Author(s):  
Gen Tian Zhao ◽  
Xu Ting Kou
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Structure Calculation ◽  
High Rise ◽  
High Rise Building ◽  
Design Requirements

With the project case, the seismic performance of girder transfer floor member and the plate transfer floor member were discussed. Contrast calculation was carried out in girder transfer floor member and the plate transfer floor member with SATWE method to analyze its reasonable and unreasonable places. Based on overall structure calculation of a high rise building, the seismic design requirements for buildings applying thick transferring plate have been presented. The conclusion is that the seismic performance of girder transfer floor member is more advantageous and affordable, more convenient and more economical in ingredients.

Automation of seismic design of high-rise structure with braced steel frame

2021 ◽  
Author(s):  
Xin Zhao ◽  
Gang Wang ◽  
Jinlun Cai ◽  
Junchen Guo
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Structural Design ◽  
Structure Design ◽  
Steel Frame ◽  
Design Methods ◽  
Automatic Design ◽  
Component Level ◽  
Design Algorithm ◽  
High Rise

<p>With the continuous development and progress of society, the structure of high-rise buildings has been paid more and more attention by the engineering community. However, the existing high- rise structure design methods often have a lot of redundancy and have a lot of room for optimization. Most of the existing seismic design methods of high-rise structures are based on engineering experience and manual iterative methods, so that the efficiency of design can not meet the needs of the society. if the method of design automation is adopted, the workload of designers can be greatly reduced and the efficiency of structural design can be improved. Based on the digital modeling theory, this paper proposes a MAD automatic design algorithm, in which the designer provides the initial design of the structure, and the algorithm carries out the modeling, analysis, optimization and design of each stage of the structure, and finally obtains the optimal structure. The structural design module of this algorithm starts from the component level, when the component constraint design meets the limit requirements of the specification, it enters and completes the component constraint design and the global constraint design of the structure in turn. In this paper, taking a ten-story braced steel frame high-rise structure as an example, the optimal design is carried out, and its seismic performance is analyzed. the results show that the MAD automatic design algorithm can distribute the materials to each part reasonably, which can significantly improve the seismic performance of the structure and realize the effective seismic design.</p>

scholarly journals Time-Dependent Damage Estimation of a High-Rise Steel Building Equipped with Buckling-Restrained Brace under a Series of Earthquakes and Winds

2021 ◽  
Vol 11 (19) ◽  
pp. 9253
Author(s):  
Ahmad Naqi ◽  
Tathagata Roy ◽  
Taiki Saito
Keyword(s):  
Damage Index ◽  
Cumulative Damage ◽  
Structural Elements ◽  
High Rise ◽  
Sequence Of Events ◽  
Design Life ◽  
Steel Building ◽  
Element Approach ◽  
Wind Events ◽  
Plastic Strain Energy

This study investigates the cumulative damage of a 20-story high-rise steel building equipped with buckling-restrained braces (BRB) under the likely occurrence of earthquake and wind events in the design life of the building. The objective of this research is to introduce a method for evaluating the cumulative damage of BRBs under multi-hazard events that are expected to occur during the service life of a high-rise building in order to achieve a safer building. A methodology is proposed using a Poisson point process to estimate the timeline of earthquake and wind events, wherein the events are assumed to be independent in nature. The 20-story high-rise steel building with BRBs is designed according to the Japanese standard and analyzed using the finite element approach, considering nonlinearities in the structural elements and BRBs. The building is analyzed consecutively using the timeline of earthquakes and winds, and the results are compared with those under individual earthquakes and winds. In addition to the responses of the frame such as the floor displacement and acceleration, the damage of BRBs in terms of the damage index, the energy absorption, the plastic strain energy, and the maximum and cumulative ductility factor are evaluated. It is observed that the BRB’s fatigue life under multi-hazard scenarios is a multi-criteria issue that requires more precise investigation. Moreover, the overall building’s performance and BRB’s cumulative damage induced by the sequence of events in the design life of the building is significantly larger than that under an individual event.

scholarly journals Some limitations of modal analysis in seismic design

1969 ◽  
Vol 2 (3) ◽  
pp. 284-288
Author(s):  
R. Shepherd
Keyword(s):  
Seismic Design ◽  
Response Spectrum ◽  
Individual Member ◽  
Square Root ◽  
High Rise ◽  
Earthquake Resistant Design ◽  
Recent Computer ◽  
Computer Analyses ◽  
Design Loads ◽  
The Individual

In the normal-mode, response-spectrum approach to earthquake resistant design of multistorey buildings the extended elastic seismic design loads are frequently calculated as the square root of the sum of the squares of the modal responses. The individual member forces are then determined using these seismic design loads. Previous research workers have examined the limitations of this technique and it is accepted as being generally applicable in practical design procedures. Recent computer analyses of projected New Zealand high-rise buildings have illustrated two conditions in which the “square root of the sum of the modal responses squared” rule is inapplicable. In this note these situations are described and suggestions are made of an alternative approach which may be adopted when deriving design loads in such cases.

On the question of setting the level of calculated impact and reliability of high-rise construction

2021 ◽  
pp. 43-56
Author(s):  
Dmitry M. Zhemchugov-Gitman ◽  
Lyubov V. Mozzhukhina ◽  
Alexander M. Uzdin
Keyword(s):  
Seismic Design ◽  
Earthquake Engineering ◽  
Seismic Loads ◽  
Seismic Action ◽  
Seismic Zoning ◽  
Reliability Factor ◽  
High Rise ◽  
Regulatory Documents ◽  
Reduction Coefficient ◽  
Damage Risk

The question of setting the seismic design input on high rise buildings is considered. The existing approaches to accounting for increased responsibility of high rise buildings in Russia are described. The proposal to reduce the probability of an acceptable building failure in proportion to the number of floors and Guideline proposals to increase the reliability factor and using maps of general seismic zoning are analyzed. The main disadvantages of methods described are indicated. It is shown that the current regulatory documents in the field of earthquake engineering do not provide the same reliability of designed structures in general and high-rise buildings in particular. The influence of seismic dangers in according with seismic zoning maps on the reliability of the designed objects is noted. An approach to generating the design input based on the permissible probability of its exceeding is considered using the example of five five-storey buildings and one 25-storey buildings. The probability of the admissible damage value included in the normative calculations is estimated. An estimate of the allowable failure probability on the value of acceptable damage (risk) is proposed under the assumption of a normal distribution of damage caused by earthquake. It is shown that the allowable failure probability decreases with decreasing acceptable damage only in the area of small damages. An approach to the assignment of seismic action based on an assessment of seismic risk has been formulated. The system of design coefficients used to calculate seismic loads on high-rise buildings is analyzed. It is noted that along with an increase in the design level of seismic acceleration, it is necessary to increase the coefficient, taking into account the low damping of high-rise buildings oscillations. At the same time, it is possible to significantly reduce the reduction coefficient by regulating the strains between the building floors.

Sign in / Sign up

Export Citation Format

Share Document