scholarly journals Comparative Evaluation of Efficacy of Three Different Rotary Retreatment Systems with Manual Instrumentation in Removing Gutta-Percha from Root Canals – An In Vitro Study

2021 ◽  
Vol 10 (14) ◽  
pp. 1025-1029
Author(s):  
Aparna V. Muraleedhar ◽  
Sarvapelli Venkata Satish ◽  
Ashwini M. Patil ◽  
Suresh Kumar Kovvuru ◽  
Snehalatha Patil
Keyword(s):  
In Vitro Study ◽  
Lower Amount ◽  
Filling Material ◽  
Root Canals ◽  
Gutta Percha ◽  
Residual Material ◽  
Group 2 ◽  
Post Hoc ◽  
Endodontic Retreatment

BACKGROUND The primary goal of endodontic retreatment is to take out the root filling completely to ensure that the canal is completely cleaned. Gutta percha removal using hand instruments is a time-consuming procedure and tedious for the operator. Therefore, various nickel titanium instruments have been introduced for the effective retrieval of gutta percha. This study was done to compare the efficacy of three different rotary systems compared with manual instrumentation for gutta percha removal during retreatment. METHODS Forty-eight single rooted premolars were prepared and obturated using gutta percha and AH Plus sealer using lateral compaction technique. Samples were randomly divided into four groups of 12 specimens each. Group 1 was retreated with Hedstrom Files (H-Files), group 2 was retreated with pro taper universal retreatment files (PTUR), group 3 with R-Endo retreatment files and group 4 with Neoendo retreatment files. Time taken for the retreatment was recorded for each tooth using a stopwatch. The samples were sectioned longitudinally and observed under a stereomicroscope. Digital images were taken and analysed using digital image analysing software. The data was statistically analysed using Kruskal-Wallis and Post-hoc Mann-Whitney test. RESULTS The Neoendo group showed significantly lower amount of residual material compared to PTUR, R-Endo and the H-Files (P = 0.00). The maximum residual material was observed in the H file group. The time taken for gutta percha removal was least for the Neoendo group followed by PTUR, R-Endo and H-Files. CONCLUSIONS None of the instruments were able to remove the filling material completely. Gutta percha removal using Neoendo and protaper universal retreatment files were faster and more efficient compared to REndo and H files. KEY WORDS Endodontic Retreatment, Protaper Universal Retreatment Files, R-Endo, Neoendo, HFiles

scholarly journals Influence of calcium hydroxide points on the quality of intracanal dressing filling

2006 ◽  
Vol 14 (3) ◽  
pp. 219-223 ◽  
Author(s):  
Nicole de Mello Rahde ◽  
José Antonio Poli Figueiredo ◽  
Elias Pandonor Motcy Oliveira
Keyword(s):  
Calcium Hydroxide ◽  
Root Canal Filling ◽  
Human Teeth ◽  
Significance Level ◽  
Root Canals ◽  
Gutta Percha ◽  
Group 2 ◽  
Post Hoc

PURPOSE: The aim of this study was to evaluate, in vitro, the quality of calcium hydroxide [Ca(OH)2] paste filling (Ultracal, Ultradent) associated or not with Ca(OH)2-containing gutta-percha points (Calcium Hydroxide Plus PointsTM, Roeko) in curved root canals. MATERIAL AND METHODS: One hundred and twenty roots of extracted human teeth, randomly divided into three curvature ranges (mild - 0 to 14º; moderate - 15º to 29º; severe - >30º) were used. After chemomechanical preparation, the roots were assigned to 4 groups (n=30), according to the technique of intracanal dressing placement: group 1 - Ca(OH)2 paste was applied with a lentulo spiral; group 2 - Ca(OH)2 paste was applied with a lentulo spiral and a Ca(OH)2 point was inserted into the canal; group 3 - Ca(OH)2 paste was applied with a NavitipTM tip (supplied with Ultracal system); group 4 - Ca(OH)2 paste was applied with a NavitipTM tip and a Ca(OH)2 point was inserted into the canal. The roots were cleared and the quality of apical third filling was assessed by a calibrated experienced examiner. The specimens were examined under stereomicroscopy and scored 1 to 4 (i.e., from inadequate to complete root canal filling). The results were analyzed statistically by ANOVA and Duncan's post hoc test at 5% significance level. RESULTS: There were no statistically significant differences (p>0.05) among the curvature degrees in groups 1, 3 and 4. Severely curved roots in group 2 presented bordering significance (p=0.05). The groups that associated the use of Ca(OH)2 paste and points (2 and 4) showed better apical filling than the other groups, but this difference was statistically significant (p<0.001) only for roots with severe curvature. CONCLUSION: According to the results of this study, the curvature degree did not influence the quality of filling. The techniques that used Ca(OH)2-containing gutta-percha points yielded better filling of the apical third in roots with severe curvature.

scholarly journals Effect of diode laser irradiation on the apical sealing of MTA retrofillings

2006 ◽  
Vol 20 (3) ◽  
pp. 231-234 ◽  
Author(s):  
Eliana Barbosa de Souza ◽  
Crystiane Venditti Gomes de Amorim ◽  
José Luiz Lage Marques
Keyword(s):  
Laser Irradiation ◽  
Diode Laser ◽  
In Vitro Study ◽  
Apical Surface ◽  
Human Teeth ◽  
Root Canals ◽  
Gutta Percha ◽  
Group 2 ◽  
Student’S T

Apical sealing is essential for the success of paraendodontic surgery, so any procedure that may favor an adequate sealing of the apical remainder should be performed. The purpose of this study was to evaluate the influence of diode laser irradiation on the apical sealing of root-end cavities with MTA retrofillings. Root canals in twenty extracted human teeth were shaped with K-files and filled with gutta-percha. The apexes were cut off and root-end preparations were performed. The roots were divided randomly in 2 groups. Group 1 (ten specimens) was retrofilled with MTA. Group 2 was irradiated with diode laser, with 1 W for 20 seconds, on the apical surface and root end cavity before retrofilling with MTA. The specimens had their external surfaces impermeabilized with cyanoacrylate, except for the apical surface, and were then immersed in 1% rhodamine B dye for 72 h and placed in plaster stone. After that, the specimens were submitted to longitudinal abrasion until half of the root remained. The linear dye leakage was observed in these mid-roots between the root canal wall and retrofilling. The linear dye leakage was measured with Image Lab software, and the results were statistically analyzed with Student's t test. There were no statistically significant differences between the two groups (p > 0.05). The diode laser irradiation did not improve the apical sealing of MTA retrofillings under the conditions of this in vitro study.

scholarly journals Effectiveness of Three Rotary Niti Instruments and Hand Instrumentation in Removing Gutta Percha from Root Canals: an in vitro Study

2015 ◽  
Vol 03 (03) ◽  
pp. 152-158
Author(s):  
Varun Jindal ◽  
Ajay Chhabra ◽  
◽  
Keyword(s):  
In Vitro Study ◽  
Radiographic Analysis ◽  
Filling Material ◽  
Universal System ◽  
Root Canals ◽  
Gutta Percha ◽  
Significant Difference ◽  
Niti Instruments ◽  
Hand Instrumentation

Abstract Objectives: The study aimed to assess variation in the remaining filling material by radiographic analysis and the time taken for retreatment system, with H-files; the ProTaper Universal Retreatment System; Mtwo retreatment system and the SybronEndo K3. Methods: 120 human mandibular premolars with single straight root canals were prepared with rotary twisted files (up to size 40/0.04) using the crown down technique and filled by cold lateral condensation and the radiographs were taken. After one week, teeth were divided into four groups (n = 30). Gutta-percha was removed using H-files, the ProTaper Universal Retreatment System, Mtwo system and the K3 System. After retreatment radiographs were taken for each sample and the remaining material was calculated for each canal third. Results: Rotary NiTi instruments were significantly faster than the hand instrumentation technique in performing the retreatment. In radiographic analysis there was significant difference in between the groups for coronal third in ProTaper group and for apical third in H-file group. Conclusions: In the radiographic analysis the ProTaper Universal System left less filling material in the coronal third and the H-files left less filling material in apical third as compared to other groups. Rotary instruments worked faster than H files.

scholarly journals Evaluation of apically extruded debris during removal of gutta-percha and ResilonTM using different instrumentation techniques

2018 ◽  
Vol 75 (1) ◽  
pp. 56-61
Author(s):  
Dragana Pesic ◽  
Irena Melih ◽  
Veljko Kolak ◽  
Ana Nikitovic ◽  
Ankica Jakovljevic
Keyword(s):  
Treatment Success ◽  
In Vitro Study ◽  
Filling Material ◽  
Gutta Percha ◽  
Rotary Instruments ◽  
Apical Extrusion ◽  
Significant Difference ◽  
Ah Plus ◽  
Endodontic Retreatment

Background/Aim. Apical extrusion of material is considered as one of the very important factor for endodontic treatment success. Microorganisms, necrotic tissue, filling material and irrigants, which can be extruded apically during endodontic retreatment, may jeopardize the success of the therapy. The aim of this in vitro study was to quantitatively evaluate the amount of apically extruded debris during endodontic retreatment of teeth obturated with two different materials, using one hand and three rotary instrumentation techniques. Methods. Ninety-six extracted single-rooted teeth were endodontically treated and enlarged to size 40 using BioRaCe system, and then randomly divided into 8 groups of 12 specimens each. Half of the specimens were obturated with gutta-percha and AH Plus? sealer and another half with RealSeal SE system, using lateral condensation technique. Retreatment was performed using: Hedstr?m files; ProFile rotary files; ProTaper Retreatment system and D-RaCe system. Apically extruded debris was collected in pre-weighed Eppendorf tubes and evaluated using an electronic microbalance. Data were analyzed statistically using t-test and analysis of variance. Results. In the AH Plus/gutta-percha group, all tested rotary instruments gave significantly less extruded debris compared with Hedstr?m files (p < 0.05). In theRealSeal group, there was significant difference between DRaCe and Hedstr?m instruments (p < 0.05). Conclusion. All retreatment techniques resulted in apical extrusion. DRaCe system produced significantly less extruded debris compared to hand files. No significant difference was found when comparing two instruments specially designed for retreatment: D-RaCe and ProTaper systems.

scholarly journals Comparative assessment of manual, rotary and reciprocating instruments for removal of root fillings, using stereomicroscope: An in vitro study

2019 ◽  
Vol 45 (1) ◽  
pp. 54-61
Author(s):  
Afzal Ali ◽  
Sazid Hussain ◽  
Sandeep Metgud ◽  
Shashank Mishra ◽  
Ankita Sharma ◽  
...  
Keyword(s):  
Root Canal ◽  
File Systems ◽  
In Vitro Study ◽  
Filling Material ◽  
Root Canal Filling ◽  
Root Canals ◽  
Tukey Test ◽  
Gutta Percha ◽  
Reciprocating Instruments

Background: To investigate the efficiency of Hedstrom (H; Dentsply Maillefer) file, Protaper Universal Retreatment system (PTUR; Dentsply Maillefer), Mani NRT-GPR files (Mani, Japan) and WaveOne (WO; Dentsply Maillefer) Reciprocating files in removing Gutta Percha (GP) and sealer from root canals. Methods: Sixty canals with less than 10° curvature from extracted human maxillary incisors were used. Root canal reinstrumentation was performed with H, PTUR, Mani NRT-GPR and WO files. Amount of residual root filling material (Gutta-percha and or sealer) were measured by using stereomicroscope. Data of GP or sealer remnants were statistically analyzed using one-way analysis of variance and Tukey test. Results: There were no significant differences among 4 groups in terms of residual root filling material in the apical third (p > 0.05). H-file group showed highest amount of root residual root filling as compared to groups. Conclusions: Reciprocating file system proved to be more efficient in removing the root canal fillings material than other retreatment file systems. H file group showed highest amount of root canal filling material. Bangladesh Med Res Counc Bull 2019; 45: 54-61

scholarly journals Fracture Resistance of Retreated Roots Using Different Retreatment Systems

2011 ◽  
Vol 05 (04) ◽  
pp. 387-379 ◽  
Author(s):  
Kursat Er ◽  
Tamer Tasdemir ◽  
Seyda Herguner Siso ◽  
Davut Celik ◽  
Sabri Cora
Keyword(s):  
Fracture Resistance ◽  
In Vitro Study ◽  
Control Group ◽  
Root Fracture ◽  
Vertical Root Fracture ◽  
Root Canals ◽  
Gutta Percha ◽  
Ah Plus ◽  
Post Hoc

ABSTRACTObjectives: This study was designed to evaluate the fracture resistance of retreated roots using different rotary retreatment systems. Methods: Forty eight freshly extracted human canine teeth with single straight root canals were instrumented sequentially increasing from size 30 to a size 55 using K-files whit a stepback technique. The teeth were randomly divided into three experimental and one control groups of 12 specimens each. The root canals were filled using cold lateral compaction of gutta-percha and AH Plus (Dentsply Detrey, Konstanz, Germany) sealer in experimental groups. Removal of gutta-percha was performed with the following devices and techniques: ProTaper Universal (Dentsply Maillefer, Ballaigues, Switzerland), R-Endo (Micro-Mega, Besançon, France), and Mtwo (Sweden & Martina, Padova, Italy) rotary retreatment systems. Control group specimens were only instrumented, not filled or retreated. The specimens were then mounted in copper rings, were filled with a self-curing polymethylmethacrylate resin, and the force required to cause vertical root fracture was measured using a universal testing device. The force of fracture of the roots was recorded and the results in the various groups were compared. Statistical analysis was accomplished by one-way ANOVA and a post hoc Tukey tests. Results: There were statistically significant differences between the control and experimental groups (P<.05). However, there were no significant differences among the experimental groups. Conclusions: Based on the results, all rotary retreatment techniques used in this in vitro study produced similar root weakness. (Eur J Dent 2011;5:387-392)

scholarly journals Sealing Ability of Endodontic Cements: An In Vitro Study

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Amira Kikly ◽  
Sabra Jaâfoura ◽  
Dorra Kammoun ◽  
Saida Sahtout
Keyword(s):  
In Vitro Study ◽  
Resin Cement ◽  
Apical Region ◽  
Filling Material ◽  
Root Canals ◽  
Gutta Percha ◽  
Sealing Ability ◽  
Adhesive Dentistry ◽  
Significant Difference

The root canal system must be obturated using a hermetic seal to prevent the penetration of microorganisms and bacterial toxins into the endodontic system. The principles of adhesive dentistry have been increasingly used in endodontics. In fact, resin-based sealers are increasingly used. The objective of this study was to evaluate, in vitro, the sealing ability of resin cement in comparison with calcium hydroxide-based cement. Materials and Methods. Eighty root canals were prepared with the Tilos system and were randomly divided into four groups according to the filling material. The best combination was evaluated on the basis of its sealing ability. The dye infiltration degree was evaluated using both a stereomicroscope after diaphanization and the dye rise test. Results. A significant difference was observed between the four obturation systems with regard to the number of infiltrated walls (p=0.014) and the infiltration depth (p=0.025). The group of teeth obturated with EndoREZ® and EndoREZ® gutta cones differ significantly from the group obturated with EndoREZ® cement and gutta-percha cones in terms of apical sealing (p=0.011). A significant difference was also observed between the group of teeth obturated using EndoREZ® gutta cones and EndoREZ® cement and the group of teeth obturated with EndoREZ® cement (p=0.026). Conclusion. When used with EndoREZ® gutta cones, EndoREZ® cement showed the best sealing ability, particularly in the apical region. When used with gutta-percha cones, Acroseal and EndoREZ® cements exhibited similar sealing abilities.

scholarly journals Tooth discoloration induced by apical plugs with hydraulic calcium silicate-based cements in teeth with open apices—a 2-year in vitro study

2021 ◽  
Author(s):  
Ralf Krug ◽  
C. Ortmann ◽  
S. Reich ◽  
B. Hahn ◽  
G. Krastl ◽  
...  
Keyword(s):  
Calcium Silicate ◽  
In Vitro Study ◽  
Color Difference ◽  
Blood Contamination ◽  
Tooth Color ◽  
Color Changes ◽  
Gutta Percha ◽  
Tooth Discoloration ◽  
Post Hoc

Abstract Objectives To assess tooth discoloration induced by different hydraulic calcium silicate-based cements (HCSCs), including effects of blood and placement method. Materials and methods Eighty bovine teeth cut to a length of 18 mm (crown 8 mm, root 10 mm) were randomly assigned to 10 groups (n = 8), receiving orthograde apical plug treatment (APT). Apical plugs were 4 mm in length and made of ProRoot MTA (Dentsply), Medcem MTA (Medcem), TotalFill BC RRM Fast Set Putty (Brasseler), or Medcem Medical Portland Cement (Medcem) plus bismuth oxide (Bi2O3) with and without bovine blood. Further, orthograde (with or without preoperative adhesive coronal dentin sealing) and retrograde APT were compared. Teeth were obturated with gutta-percha and sealer, sealed with composite and stored in distilled water. Tooth color was measured on apical plug, gutta-percha/sealer, and crown surface before treatment versus 24 h, 1, 3, 6, 12, and 24 months after treatment by spectrophotometry. Color difference (ΔE) values were calculated and analyzed by Shapiro–Wilk test, ANOVA with post hoc tests, Friedman test, t test, and post hoc tests with Bonferroni correction (α = .05). Results Tooth discoloration occurred in all groups with no significant differences between HCSCs (p > .05). After 24 months, color changes were prominent on roots but insignificant on crowns. Blood contamination induced a significantly decreased luminescence (p < .05). Blood had a stronger impact on tooth color than Bi2O3. No relevant effects of retrograde placement (p > .05) or preoperative dentin sealing (p > .05) were detected. Conclusions Apical plugs of the tested HCSCs cause discoloration of bovine roots, but not discoloration of bovine tooth crowns within a 24-month period. Clinical relevance APT should be performed carefully while avoiding direct contact with the coronal dentin, and in that case no aesthetic impairments occur.

scholarly journals Evaluation of Apical Sealing Ability of Four Different Sealers using Centrifuging Dye Penetration Method: An in vitro Study

2012 ◽  
Vol 13 (6) ◽  
pp. 830-833
Author(s):  
Romel Joseph
Keyword(s):  
In Vitro Study ◽  
Blue Dye ◽  
Control Groups ◽  
Root Canals ◽  
Dye Penetration ◽  
Gutta Percha ◽  
Sealing Ability ◽  
Ah Plus ◽  
And Control

ABSTRACT Aim The aim of this in vitro study was to evaluate the apical seal obtained with four root canal sealers AH 26, Sealapex, Endoflas FS and AH Plus, with lateral condensation. Materials and methods Sixty root canals were prepared using the step-back technique. The specimens were divided into four experimental groups of 12 teeth and two control groups of 12 teeth. The experimental groups were obturated by laterally condensed gutta-percha with one of the tested sealers and control groups were obturated without any sealer. Methylene blue dye penetration with centrifuging method was used to evaluate the apical sealing ability. The quantitative apical leakage of each specimen was measured after 2 weeks. Results The results showed no significant differences between all groups except between AH Plus and Endoflas FS (<0.05). AH Plus showed significantly less leakage than Endoflas FS. Conclusion AH Plus showed the least leakage compared to AH 26, Sealapex and Endoflas FS. How to cite this article Joseph R, Singh S. Evaluation of Apical Sealing Ability of Four Different Sealers using Centrifuging Dye Penetration Method: An in vitro Study. J Contemp Dent Pract 2012;13(6):830-833.

scholarly journals Adhesion of Two New Glass Fiber Post Systems Cemented with Self-Adhesive Resin Cements

2019 ◽  
Vol 7 (3) ◽  
pp. 80 ◽  
Author(s):  
Esin Özlek ◽  
Prasanna Neelakantan ◽  
Jukka Pekka Matinlinna ◽  
Sema Belli ◽  
Mehmet Ugur ◽  
...  
Keyword(s):  
Bond Strength ◽  
Adhesion Strength ◽  
In Vitro Study ◽  
Study Groups ◽  
Fiber Post ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Root Canals ◽  
Group 2

The aim of this in vitro study was to evaluate the adhesion strength of two new fiber post systems (FiberSite™ Post and Cytec™ Blanco Post) cemented with two different adhesive resin cements (Panavia™ SA and Maxcem™ Elite). Root canals of sixty extracted human mandibular premolars were prepared using ProTaper Universal™ rotary files (Dentsply Sirona Endodontics, York, PA, USA). The root canals were irrigated with 5.25% sodium hypochlorite (NaOCl) during instrumentation. After root canal preparation, the canals were irrigated with 2 mL of 17% EDTA (1 min), followed by 2 mL of 5.25% (5 min) NaOCI, and 2 mL saline. The root canals were dried with paper points and divided randomly into two study groups (n = 30) according to the type of post system: Group 1, FiberSite™ Post (MegaDental, Partanna, Italy); and group 2, Cytec™ Blanco Post (Hahnenkratt, Königsbach-Stein, Germany), with one of the two adhesive resin cements: Subgroup A, Panavia™ SA Cement Plus Automix (Kuraray, Osaka, Japan); subgroup B, Maxcem™ Elite (Kerr, Orange, CA, USA). Following thermocycling, the adhesion strength was evaluated using the push-out adhesion (bond) strength test. Fractographic analysis was performed using stereomicroscope. The data were analyzed using two-way analysis of variance (p = 0.05). The adhesion strength values of both the posts were significantly higher when cemented with subgroup B (Maxcem™ Elite). The highest adhesion strength value was demonstrated by group 1B (FiberSite™ post cemented with Maxcem™ Elite cement). The type of post did not have a significant impact on the bond strength values for either cement material.

Sign in / Sign up

Export Citation Format

Share Document